Reviews
Fits: HONDA CT125, HONDA Super Cub 50, HONDA SUPER CUBC125, HONDA SUPER CUB110, HONDA SUPER CUB110ThailandMODEL, HONDA DAX125
The gap between the Grip and the Large is small.
I installed it on a DAX125 and as you can see in the picture, the gap with the Grip is LARGE compared to the OEM Bar End and it looks very bad. The quality of the product is very good, so it is very disappointing that the insert is so long. I think I will return to the OEM because it is a part that is always in my sight. View detail
It's not so much the rubber, but the plastic.
I bought it because I was looking for something short and the Design seemed to catch on my fingers, but it was much stiffer than I had imagined.
Hard is not Level.
I haven't used it yet so I don't know how it feels yet, but I can't wait to try it out.
View detail
SP TAKEGAWA Lever Grip
About quality and texture It's a common product for sponges About the feeling of use It feels soft Products to buy together None. Difficulty of installation It's hard. I'm wearing a takegawa quick lever, but the end is round, so it's hard to put it in from there Cost performance and comparison with other products The price is good, but it feels like a one-time product About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I was going to use the reinforced clutch because my hands felt tired, but if I installed it now, I thought it would not be usable at all during the riding season, so I postponed the installation View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY RT, HONDA MONKEY BAJA
Used for Takegawa specula
I had been using the one that came with my Specula Kit for many years and wanted to replace it before it ran out.
I went with a 10 cm shorter one than the Kit one, and it handles nicely and works fine.
View detail
Fits: Others MIKUNI VM26, Others KEIHIN PE28, Others KEIHIN PE24, Others KEIHIN CR mini, Others KEIHIN PD22, Others KEIHIN PC20, Others KEIHIN PC18, Others KEIHIN PB16
pe24
About quality and texture The quality of the product is not bad About the feeling of use But after using it, I couldn't show the performance that I was thinking of Products to buy together Big Cabrator Difficulty of installation easy, simple Cost performance and comparison with other products I recommend Kitaco products more About shipping and packaging The packaging is always meticulous The delivery took a week Any concerns, cautions, or advice when purchasing When I first wrapped the stroll, I couldn't feel anything 5mm. Maybe because it was shared, I was disappointed from this part, and it didn't hold with Kitako's product, so I put a sponge on it and held it View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB70, HONDA SUPER CUB 90
You might not be able to tell if you have the Enhanced Shock on.
I installed it on a 1983 C50.
Probably not compatible, but I was able to install it without any problems.
The quality seems good, but the price seems a bit high.
The images in the Instruction Manual are rough and somewhat confusing.
I honestly couldn't tell much difference, probably because I had changed to an external front shock.
It may be different with OEM.
2.I have a 50 Tire, but it lightly interferes with the bolt head as it is, so I replaced it with an extra-low head cap bolt to accommodate this.
View detail
Fits: HONDA CROSS CUB50, HONDA GROM, HONDA CROSSCUB110, HONDA ZOOMER XThailandMODEL, HONDA ZOOMER X, HONDA ZOOMER FI, HONDA CT125, HONDA GB350, HONDA GB350S, KAWASAKI KSR110, HONDA Dunk, HONDA MONKEY FI, HONDA 12VMONKEY, HONDA Ape100, HONDA Ape50 FI, HONDA MONKEY125ThailandMODEL, HONDA Ape50
sp Mukawa Knuckle guard
The Guard section seems to be narrower than expected.
Not much wind protection.
I think the custom look is quite good.
View detail
Fits: HONDA CROSS CUB50, HONDA GROM, HONDA CROSSCUB110, HONDA ZOOMER XThailandMODEL, HONDA ZOOMER X, HONDA ZOOMER FI, HONDA CT125, HONDA GB350, HONDA GB350S, KAWASAKI KSR110, HONDA Dunk, HONDA MONKEY FI, HONDA 12VMONKEY, HONDA Ape100, HONDA Ape50 FI, HONDA MONKEY125ThailandMODEL, HONDA Ape50
sp Mukawa Knuckle guard
It is smaller than I expected. It doesn't have much wind protection. It is a dress-up part of the look. View detail
As a measure against cold, it is better than nothing.
I installed it on the Scooter that I use for shopping, etc.
It is installed on Initial ModelBirdCity125 and OEMLever.
I bought this to see if it would help with the coldness of the Lever, which is transmitted even when wearing winter Gloves.
When I actually use it, it's better than nothing, and cold things are cold, but I feel that the speed at which the heat is taken away from my fingertips has slowed down.
It is uncomfortable at first because Lever becomes thicker when you put it on, but it does not interfere with Lever operation because there is an unevenness that matches your finger.
When I put it on, I tried to put it on Lever without thinking anything and I went as far as wrapping the ball of LeBar End, but it didn't proceed from there. I remembered that I used detergent in the impression of other people and I put 1 or 2 drops of kitchen dishwashing detergent in the hole. I put a drop or two of kitchen dishwashing detergent in the hole, and it went in easily.
It moves right after I put it on, but after a few days, it doesn't move anymore.
View detail
Fits: HONDA 6VMONKEY, HONDA 6VMONKEY, HONDA 6VMONKEY, HONDA 6VMONKEY, HONDA 6VMONKEY, HONDA 6VMONKEY, HONDA 12VMONKEY, HONDA 12VMONKEY, HONDA 12VMONKEY, HONDA MONKEY (FI), HONDA 12VMONKEY
Separate handle style
At best, it is easy to ride with Separate handle style. If it is bad, it is halfway.
It gives the whole thing a schmaltzy feel.
I personally think it would have been nice to have a little more Handlebar width.
View detail
CRF50F Large Person Spec.
I spec'd it on a CRF50F with a raised Handlebar height.
The quality is normal, leaning towards bad.
The Throttle wire and Throttle body are normal, and the Bolt that comes with it is Rusty.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY RT, HONDA MONKEY BAJA
Clutch Cable replacement
[How is it used?
Used for 88 GORILLA
Was the one you received as per Image?
high
Was the installation difficult?
unspecialized
How was your experience with it?
My last Clutch Cable lasted me about 10 years, so I'm hoping that I can put Oil in the Cable again to make it last longer.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It is a little more expensive than OEM Parts.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: Others , HONDA MONKEY, HONDA GORILLA, HONDA ZOOMER-X
If it didn't deflect and warp, I'd give it 4 stars.
The aluminum bar is about 5mm thick, but the handlebar is not strong enough after installation. View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50, HONDA APE TypeD, HONDA APE 50, HONDA XR100MOTARD, HONDA XR50 MOTARD
The thing itself is fine, but ……
It is nearly impossible to replace the Mirror Clamp part.
If the Mirror Clamp is installed in the wrong size, it is very difficult for an amateur to replace it.
I really wanted to install a 10mm, but I installed an 8mm by mistake.
I tried to replace it, but I couldn't do it because the small stick-like thing got stuck Exactly.
You can't blow a Raspene.
I had no choice but to use it as is.
In addition, Clutch Wire has to be used only for Takegawa.
Be careful when using it.
View detail
Difference from OEM Product
The OEM Product has too poor visibility for people with large body...
I chose this product because the mirror moves and can be fine-tuned in MirrorCase.
I think the shorter Arm looks better, but I installed the longer one for better visibility.
Mirror shape is the same as OEM, but the adjustment allowance gives you better visibility!
I'm happy with the look and the OEM Arm is more consistent than the Plating one.
View detail
Good
I bought it at another shop, but the texture is good because it is made by SP Mukawa, the black is not conspicuous, the logo is cool, and the installation is easy. As for the feeling of use, the mounting position of the body was lower than I thought, so if the mounting angle could be changed, it would have been the best. View detail
Grip heater is a must! (^_^) v
[How is it used?
Since we have increased the number of cars, we will install it as soon as possible.
It's a midwinter staple. (^^) v
Was the installation difficult?
I moved the Motorcycle switch box 10mm inwards to prevent the Grip heater switch from being gapped 10mm outwards between the Motorcycle switch box and the Grip.
Wiring etc. is the same etc. as other company's products.
How was your experience with it?
The visibility of the temperature setting confirmation Lamp is good.
No problem with the warmth.
Good operability.
View detail
It was satisfactory.
Is MirrorBody worth the price? Small work logo was printed.
Also, it comes with a Takekawa Sticker.
It's definitely easier to see than the OEM Round Mirror. It is a little shaky with vibration, but I was happy with it.
View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA APE 50, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE TypeD, HONDA APE 100 TypeD, HONDA APE 100, HONDA XR50 MOTARD, HONDA XR100MOTARD
It will not be attached as it is.
You can't put it on with NORMAL.
The Screw hole pitch did not fit.
I wondered if there was anything that could be done about it since the price is there.
View detail
It's expensive, but nice
As I thought, Takekawa! Best
But! High! Takekawa, after all
But once you put it on, it's too good for Parenthesis, so you can't remove it
High Solo and Quantity in Takekawa:It's best if you put it on a set
You might want to buy one when you change your Grip
View detail