Reviews
Fits: HONDA MONKEY, HONDA DREAM50, HONDA GORILLA, HONDA APE 50, HONDA XR50 MOTARD, HONDA XR100MOTARD
The breather cap is a work of art to look at in it's design and finishes
About quality and texture - The breather cap from SP Takegawa is made from billet aluminium with precision machining and an anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The breather cap is a work of art to look at in it's design and finishes and combined with an oil catch tank has resolved my engine oil loss caused from high RPM riding by allowing the oil vapour generated during this period of riding to be directing back to the engine via the clutch cover. Products to buy together - A key product to buy together with the breather cap is a oil catch tank that will allow for the collection and separation of the oil from the vapour output from the engine. Difficulty of installation - The installation of the breather cap is a simple task that took 0.2 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the breather cap to the clutch cover. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the breather cap is no different. The design of this breather cap with it's rotating barbed hose fitting is what sets it apart from the others. About shipping and packaging - With there being no cost difference between sea freight and EMS for the breather cap, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Monkey 125 but the range is very limited. View detail
Is perfectly sized for engine breathing applications when connecting to the factory barbed hose fitting
About quality and texture - The 8mm breather hose from SP Takegawa is made from a soft rubber material with reinforced strands featuring a clear finish and the quality from the overall fit and finish is perfect. About the feeling of use - The 8mm breather hose is perfectly sized for engine breathing applications when connecting to the factory barbed hose fitting and the majority of other breather system barbed hose fittings, like on my Honda Monkey 125 but is only to be used with air systems and not oil or fuel. Products to buy together - The 8mm breather hose does require to be firmly secured to the hose fitting, the use of zip ties is not my preferred method as a permanent solution so the use of specifically sized 13mm hose clamps from SP Takegawa is what I would recommend. Difficulty of installation - The installation of the 8mm breather hose is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of a measuring device, cutting tool and sandpaper to neatly finish the hose ends off is how I like to carry out the task for my breather hose fitment. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the 8mm breather hose is no different. A reasonable quantity of 1m with no lapse in quality. About shipping and packaging - With there being no cost difference between sea freight and EMS for the 12mm breather hose, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing common use products like this from Webike Japan is the best option even when taking into account the shipping cost, as I find local stores tend not to stock products I can use on my Monkey 125 or they are priced higher the majority of the time. View detail
SP Mukawa CenterCarrier
Purchased for SUPER CUBC125.
ExactFit to CUB with Refreshing Design.
There are carriers with extravagant designs, but this product is simpleis the best and well-made.
I think the price is a little high, but I agree that it is a Brand.
View detail
Genuine SP Takegawa Master Cylinder Lever for Honda Monkey 125
I specifically purchased this Kitaco lever as it is a billet one and not a steel one that came on the bike. The customer wanted a billet lever as a replacement anyway due top asmall fall and the lever got scratched pretty badly. I looked a t a few other brands but finally found that SP Takegawa did a cracking deal on this lever so in my basket it went. It was not really hard to find as I just used the search on Webike for this model and narrowed down categories. For what this is actually made of the price was slightly reflected in that but still, really good value from a great brand. With some other parts, my order was shipped using EMS and arrived in 5 days. The lever did comae in the SP Takegawa packaging and was well protected. The design is flawless and a really good take on a classic lever pattern. As this is billet, it is made from one piece of aluminium and you can see that in the lever. The quality is really stunning. A lovely smoothed out surface with plenty of meat on it so it will not break easily. Fitting this to the Monkey bike was just a matter of unscrewing the pivot bolt and replacing the lever. Nothing hard at all. It did surprise me but the lever once fitted does feel like it belongs on the bike anyway. The action is smooth and no notchiness. Very pleased with this purchase. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
The quality of the product itself is good.
It is fastened with a string.
If you tighten the strap in the wrong direction, it may tear.
When tightening the strap, be careful not to tear the opening.
The cushioning has improved and the quality of the product itself is good.
I would like to recommend it to anyone who feels burdened by fancy, genuine sheets.
-------------------------------------------------- -------- It is fastened with a string. If you tighten the strap in the wrong direction, it may tear. When tightening the strap, be careful not to tear the opening. The cushioning has improved and the quality of the product itself is good. I would like to recommend it to anyone who feels burdened by fancy, genuine sheets. Powered by Google Translator
View detail
Fits: HONDA CT125, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA SUPER CUB110 PRO, HONDA SUPER CUB 50 PRO, HONDA CT125
Shock absorber with limited CROSS CUB50cc compatibility
I was looking for Shock absorber due to OEM fluff, but only Mukawa and Endurance had it as 50cc compatible by Manufacturer.
The damping force can be adjusted to 5 levels, and although I ran the car in the softest state, it felt much stiffer and more firmly planted than the OEM.
Red Nut in the picture is SP Mukawa Rear shock mountNut8 hole Red 06-06-0020
View detail
Rear Fender Guard for CROSS CUB
I am satisfied with the ruggedness of the back.
There were more places to loosen Bolt than expected for installation.
Attempted to install KIJIMA Tail lamp guard 203-140 at the same time, but it interfered with the guard, so modification was necessary.
Need to cut the lower part of the Tail lamp guard.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSS CUB, HONDA CROSSCUB110
Tachometer for Motorcycle
The OEM CROSS CUB 50cc does not have a Tachometer, which I discovered in my search.
The CROSS CUB50cc is a 4Cycle, so it was displayed correctly without any setting changes, although it can be made to display correctly in 2CycleEngine and other engines by changing the settings.
There are other types of Tachometer made by Mukawa, but this product is simple enough to display the Rev limit in addition to the RPM.
The Rev limit can be changed by operating the button on the reverse side. The OEM Rev limit for the 50cc CROSS CUB is 9000 rpm, so I set it at 8500 rpm to be on the safe side.
The Yellow Lamp lights up before the set 500 rpm and the Red Lamp lights up at the set rpm.
The Instruction Manual also states that if this product is installed, the display may come off if a Fog Lamp or Ignition coil from another company is installed.
Other items in the photo are KIJIMAHandlebar Mount Bracket, NeoFACTORY 48mm Voltage Meter White Panel Stainless, Eye PRO ShiftIndicatorAPH8 Red
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB110, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA CHALY, HONDA DAX, HONDA CD90, HONDA CD50, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125, HONDA GORILLA, HONDA MONKEY, Others , HONDA SUPER CUB110ThailandMODEL, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA LITTLE CUB
Easy Dress-up
I bought it to replace the rear shock absorber.
One point can be fashionable.
When using this product, the washer that comes with the Rear shock absorber may or may not be used, so it is necessary to read the Instruction Manual.
Rear shock absorber in the photo is SP Mukawa Rear shock absorber Black 06-04-0152
This one product contains 4 Nut.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
It fits neatly!
[How is it used?
I had been using Z50J OEMWiring for about 10 years,
Harness was replaced in consideration of deterioration.
The Engine starts up better.
Was the one you received as per Image?
It was as confirmed by the description on the ManufacturerHP.
Was the installation difficult?
Wiring diagram is included, but because of full-wave rectification,
The connection was made in conjunction with the Wiring diagram from the previous processing.
Only the Connectors on the Regulator are processed.
Wiring around the Headlight is short because of the 3cm LongFrame, though,
The length is the same etc. as OEM.
How was your experience with it?
Meter and Tail lamps are made by Takekawa,
The connection was ready.
We use an external Alarm, but diverted the Harness kit Wiring,
Quantity since OEM:1 Set of 4pcs. could reduce the wiring in the eye photo.
[Included Parts:were they on?
Wiring diagram and Connector for Charger connection are included.
View detail
Fits: HONDA SUPER CUBC125, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA CT125, HONDA CB125R, HONDA CB250F, HONDA MONKEY125, HONDA CBR250R, HONDA MSX, HONDA GROM, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA MONKEY125ThailandMODEL, HONDA CB150R, HONDA DAX125, HONDA CT125
This is what a luxury Lever is:??
Mukawa High Quality Lever??
Texture and structure are both good!
I just think 20,000 yen is a little too much ….
View detail
Fits: HONDA CROSS CUB, HONDA CROSS CUB50, HONDA CT125, HONDA CROSSCUB110, HONDA CT125
improve one's footing
Footing is slightly better.
This makes the Side Stand longer, or the Motorcycle less inclined and unstable, and the Center Stand harder to apply.
Ride quality is better than OEM.
Now we'll see how durable it is
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA MAGNA50, HONDA CUB press 50, HONDA CUB press 50, HONDA SUPER CUB 90, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA GIORCUB
If you want to Tuning engine+NORMALAir cleaner!
Used for LITTLE CUB.
After standard light tuning such as 75cc bore up, high camshaft, carburetor replacement with PC20, connecting pipe replacement for CUB90, etc., NORMALA air cleaner seemed to be a little insufficient in air capacity.
Nevertheless, we wanted to use the NORMALAir cleanerBox as it is, and we did not want the intake noise to be loud without a filter, so we chose to replace the air filter inside with this product.
Installation was very easy and the procedure is exactly the same as replacing the OEM air filter!
This Sponge Filter certainly lets a lot more air through than the paper version of the NORMALAir Filter.
In addition, when connecting to the connecting pipe of the pre-regulation CUB90, the filter side connection port is a little large, so it could be connected without loosening by filling the gap with a thick gap-filling tape or the like.
View detail
The night is fun.
It feels quite bright.
If you adjust it with the mounting angle, you may not be dazzled by oncoming cars, etc. lol
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Parts that make you wish you had put it on earlier.
My MONKEY is 88cc.
I have heard many things about 88cc engines, such as that they are difficult to ride due to lack of torque or that the idle is unstable, but this is not the case at all, and the response is improved and the engine is fun to ride.
View detail
Fits: Others , Others , Others , Others , HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA monkey, HONDA Super Cub 50, HONDA Super Cub 50, HONDA little cub, HONDA little cub, HONDA 12VMONKEY, HONDA CT125, HONDA SUPER CUBC125
Fast delivery of perfect product
Thank you for the quick delivery, excellent quality, and packaging.
During installation, it was possible to easily search without product processing or unnecessary steps.
Comfort was provided above all else when worn.
Of course, the style has been improved and it looks clean.
Due to the nature of consumables, there is room for additional purchase ------------------------------------------ ---------------- Thank you for the quick delivery, excellent quality, and packaging. During installation, it was easy to search without any product processing or unnecessary steps. Comfort was provided above all else when worn. Of course, the style has been improved and it looks clean. Due to the nature of consumables, there is room for additional purchases. Powered by Google Translator
View detail
Fits: YAMAHA BirdCity125, YAMAHA NMAX125, YAMAHA CYGNUS X, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ESTRELLA, KAWASAKI ZZR250R, KAWASAKI ZZ-R250, KAWASAKI ZZR250, KAWASAKI ZZ-R1200, KAWASAKI ZXR750R, HONDA CRF100F, HONDA CBR125R, HONDA Ape50, HONDA ADV150, HONDA Ape100, KAWASAKI GPX400R, KAWASAKI GPZ400R, KAWASAKI GPZ900R
SP TAKEGAWA discharge bolt (w / magnet)
What are you waiting for? What are you waiting for? I want to know what I want to know. I want to know what I want to know.
Although it is not a visible part, this product is really good in that it can filter out iron powder inside the bike. The finish and design are wonderful. Thank you for the quick delivery. I would recommend this product to others. -------------------------------------------------- -------- It's not something you can see, but it's really nice to have this product to filter out the grit from the inside of the bike. The finish and design is great. Thank you for the prompt delivery. I would definitely recommend this product to others. Powered by Google Translator
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
Good sound and performance
I chose YOSHIMURA's Down Type for JB02, but I was sure to choose Normal look for JB03 this time. The sound is a little more crisp than the OEM, not too loud and not a nuisance to the neighbors. It is not too loud and not bothersome to neighbors.
Material like DAX if possible.:I wish I had preferred Stainless Steel.
View detail
Even a custom novice could install it.
I installed this product on a CT125 JA65, and although I am new to customization, I was able to remove the existing frame and install this product without any trouble. Although the Instruction Manual mentioned that there is an upper and lower joint frame, it was difficult for a layman to understand the diagram for distinguishing between the upper and lower frames. It was difficult for a layman to understand the diagram for identifying the top and bottom. I thought that only a person who could read drawings could understand it. Apart from my impression of the product, I was also not impressed that I could finally buy the product more than three months after each Site listing began. View detail
Fits: YAMAHA BirdCity125, YAMAHA NMAX125, YAMAHA CYGNUS X, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ESTRELLA, KAWASAKI ZZR250R, KAWASAKI ZZ-R250, KAWASAKI ZZR250, KAWASAKI ZZ-R1200, KAWASAKI ZXR750R, HONDA CRF100F, HONDA CBR125R, HONDA Ape50, HONDA ADV150, HONDA Ape100, KAWASAKI GPX400R, KAWASAKI GPZ400R, KAWASAKI GPZ900R
A well designed product that integrates into the factory engine case to add a useful feature
About quality and texture - The drain bolt with magnet from SP Takegawa is made from billet aluminium with precision machining and a red anodized surface finish while the quality from the overall fit and finish is perfect. About the feeling of use - The drain bolt with magnet is a well designed product that integrates into the factory engine case to add a useful feature that helps with engine longevity by removing unwanted metal from the oil. Products to buy together - A key product to buy together with the drain bolt with magnet is the SP Takegawa LED temperature guage that will allow for monitoring of the engine oil temperature to ad further longevity of the engine. Difficulty of installation - The installation of the drain bolt with magnet is a simple task that took 0.2 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the drain bolt with magnet to the engine case. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for but the drain bolt with magnet is priced higher this time round. The design of this drain bolt with magnet with it's sensor hole is what sets it apart from the others. About shipping and packaging - With there being no cost difference between sea freight and EMS for the oil filter cover, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic. View detail