Reviews
Here’s some fitting instructions
I've been using throttle paddles from various manufacturers over the years & while typically effective in general- they tend to either be low cost & cheap looking/a bit flimsy~ or expensive and good quality plastic & strong, fairly rigid construction. This product is a curious one. It's price is very low & the plastic quality is excellent. The only real issue is that it uses a rubber strip instead of a rubber tube to fit between the handlebar grip & the paddle body to provide friction & prevent slippage. ~ this rubber strip is challenging to install as it needs to be initially fed inbetween the grip & the paddle..I recommend a pair of long nose pliers for this task. Once some of the rubber strip is partially fed in- turn the paddle & it will pull the rest in. Take your time setting up the paddle- start a little low & working it up in increments. If you rotate it too much the rubber strip will come out & you'll need to start the whole process again. On the bright side- once it's properly set up, it won't slip at all. View detail
Good for the price!
Satisfied with Large. However, 1 pc of the 6 screws included had no screw threads. I didn't use it for M8, so there was no damage, but I realized that the inspection level is different from made-in-Japan. It is a pity because the product itself is good. View detail
Looks just like the OEMMirror from VANVAN90!
I used it on a VANVAN90 Restore that I got from my friend's father.
The OEM Mirror screws are of course no longer in production, so I tried to find a good used one, but they are being sold at a ridiculous price. I don't want to buy from those malicious people anymore, so I was looking for something similar to the OEM and the shape, and I found it here.
Our VANVAN90 still has the Only RightOEMMirror, so we removed it and polished it like a demon with PIKAL, and used this for the missing Left Mirror.
The shape is exactly the same, so there is no sense of discrepancy. The only difference is that it does not have the SEA BASSOEM SMark engraved on it, so it is comparable to the OEM Mirror unless you get close and look closely.
Quantity:Pair (for Left and Right) So, RightMirror will be Stock in case the Original Mirror you are currently wearing decays.
We do not recommend it to those who are concerned about NumbersMatch, but we highly recommend it to VANVAN90 users because it has the same shape and can be purchased at a reasonable price.
View detail
difficult
The Large size is useful for touring use, but this kind of product ends up breaking due to lack of strength. What is strange is that this kind of product does not have Material:The lack of Carbon. Carbon, which absorbs vibration, is flexible and strong, and should be an excellent material. View detail
Stylish
I installed it on a Silver body! It's a unity
I like the Black Rail part of it, it's subtly Accent!
The Aluminum Grip is very high quality and this product is very easy to install and remove It was!
If it were a little cheaper, it would be great!
View detail
It looks nice.
It was a bit difficult to install, but I love the look and feel of unity and luxury!
The Grip width is also much thicker
The look is one of my favorite things I've tried out of all the things I've tried!
View detail
Grip feeling
The weaknesses of the Aluminum Grip are that it's slippery and gets cold in the winter!
I don't use it in the winter, so I'm not sure about the slipperiness
The unevenness of the rail section is Grip, which prevents it from sliding After that, I personally like the grip of the uneven part!
View detail
Off Not suited for cars?
Since it runs about 200 times each time, I thought that it would be possible to reduce the burden on the wrist and I bought it. On road was able to feel sufficient effect. However, in the forest road I broke when I knocked down one turn ... It is a good item if I do not fall over (^_^;) View detail
Honda old car style
Honda is the old car style Mirror. I feel the shape almost as it is. Bracket part is looking for short Type and purchased.
Although it looked as expected, Mirror will be displaced immediately by vibration... What I bought for Right was Large, so it may be individual differences. However, the Mirror alignment part is a construction that seems to be vulnerable to vibration originally
View detail
Although a Mirror portion is a little small, it can be used satisfactorily. Since attachment is possible without an 8-mm Type Adapters, the circumference of a Handle becomes the impression felt refreshed.
Although a Mirror portion is a little small, it can be used satisfactorily. Since attachment is possible without an 8-mm Type Adapters, the circumference of a Handle becomes the impression felt refreshed. View detail
Although it is hard to see back a little, it is satisfied with form and a Cost performance. Moreover, durability also seems to be good. I consider that it is better to indicate not suiting the safety standard to a goods Page firmly however. I thou
Although it is hard to see back a little, it is satisfied with form and a Cost performance.
Moreover, durability also seems to be good.
I consider that it is better to indicate not suiting the safety standard to a goods Page firmly however.
I thought whether after arriving, it would be in a Package and could use for it the description of un-suiting for a moment.
If it can do, I would like to arrange by the Parts which met the standard, although it seems that it does not become violation since it is an old Motorcycle.
I think that I will use it for a while this time.
View detail
Although a Mirror portion is a little small, it can be used satisfactorily.
Although a Mirror portion is a little small, it can be used satisfactorily. View detail