Reviews
Convenient to have
It can also measure depth, which is very useful to have.
The movement is a little stiff, but I think it is appropriate for the price.
View detail
For EngineOH
It arrived quickly and is quite good,
Happy to have tools as well as Motorcycle supplies.
View detail
If you want to do your own maintenance...
I already owned SK11 Fujiwara Sangyo's digital torque wrench for 3~60Nm for Spark plug and Small size Screw, but I wanted to tighten it at 59Nm for Torque management of Axle Shaft by removing and installing Wheel, so I needed to purchase Large Range 6 I needed to purchase a 6.8~135NmDigital torque wrench.
Since the range is from 3 to 60Nm, if the value is 59Nm, the digital torque wrench that you already own would be OK, wouldn't it? However, the Torque wrench's accuracy is higher in the middle of the range, and as you go to the end of the range, the accuracy drops.
Switching from the pre-set type to the digital type requires some getting used to, as the buzzer sound and LEDMeter are used to determine when to stop.
I think the Torque numbers are correct with the inspection certificate included, so I think it is safe to use.
View detail
For creating Bolt holes in Gasket
[How is it used?
I bought this to drill Bolt holes for UniversalGasket.
A 6mm hole at the Bolt point of M5 is just right, and a 9mm hole that can be used as For M8 is also a Quantity.:I chose this product because it was a Set.
How was your experience with it?
It takes only a few seconds to pull out Gasket.
I felt that the teeth were in good condition and sufficient for amateur DIY Level use.
How did it compare to other products?
Single Item's or a larger number of Quantities:Set and compared before purchase.
1 pc is rather expensive and a Quantity that contains many pcs.:We chose this product because it is not used as often as the Set product.
[Points to note]
Naturally, you will need a Hammer and a hard Seat to put down when working.
【Review】
It is inexpensive, but it has served its purpose well.
With Motorcycle, it seems that 3mm will not be available, so it would have been best if 7mm had been included instead.
View detail
easy to use
Self-maintenance and maintenance of motorcycles requires a precise torque wrench. The SK11 digital torque wrench purchased by webike has an accuracy of ±3%, which is sufficient for daily use. The digital display is more intuitive and not easy to make mistakes. The measurement range is 3-60 N meters cover almost all screw torques on a motorcycle. -------------------------------------------------- -------- Maintenance and maintenance requires a precise torque wrench. The accuracy of the SK11 digital torque wrench purchased by Webike is ± 3%. Mi covers almost all screw torque on the motorcycle. Powered by Google Translator View detail
A must for Maintaining
I think it is a necessity for Maintenance.
The Torque used frequently is supported, but the ASKULNut and others require 110 Nm, so a different Torque wrench is needed.
View detail
Sunday mechanic has an Exactly
[How is it used?
YAMAHA XJR400R (Type 07) I purchased this product because I needed to take various measurements when servicing the
I often made mistakes by doing it visually, especially the thickness of Washer and the length between Screw holes.
Was the one you received as per Image?
We chose this product because it is inexpensive and can measure up to 100mm.
It is good for universal use because it can measure outer diameter, inner diameter and depth.
How was your experience with it?
I think it is inexpensive, easy to use, and has a solid accuracy aspect.
Plastic's Caliper is also available at 100s etc., but I think SK11, which is a solid Brand, is better because of the possibility of breakage and lack of reliability.
It is also nice that it comes with a bag, so there is less risk of loss, damage, or injury.
[Points to note]
It is not a problem at the Level, but the movement is a little sluggish. It is not a problem at this level, but it is a little reluctant to move.
How did it compare to other products?
We compared it to the Digital Caliper of the same Brand and the Caliper of the Others Tool Manufacturer.
I bought it because it was relatively inexpensive and I thought that the accuracy aspect would be safe because it was a brand that I saw in Home center etc.
Also, I heard that Digital Caliper often runs out of batteries when it comes time to use it, so I thought Analog would be sufficient for Sunday mechanics.
View detail
A little troublesome to set up.
This is my first time using Digital torque wrench. I guess it is a matter of getting used to it, but the settings are a bit cumbersome.
As for performance, I think it's fine because it covers the most Torque range of Motorcycle tinkering.
It also provides light and sound notifications, making Torque management easy.
View detail
Is good
The Chromium Plating process is highly accurate and resistant to Rust.
I use it to measure all kinds of Parts and have no institutional problems.
This Caliper is very easy to use due to its low rattling.
View detail
A must for low Torque measurements
I purchased this product to replace the stud bolt on my NSR250R Cylinder.
Low-Torque areas will be the source of Cracks if they become Overtorque even a little bit.
Torque management is essential.
So we used this one, and we are glad that we were able to use it successfully.
View detail
In addition to leather
I first bought it to poke holes in leather.
Now I use it to drill holes in everything.
I use it to put on Eyelet.
It is convenient because the hole will open as soon as you hit it with Hammer.
I think it is durable because the sharpness lasts for a long time.
View detail
Precision
I bought the Torque wrench because the accuracy of a certain PROducts Torque wrench was obviously not right. However, with sk11's Torque wrench, the "snap" sound is not so clear, but it can be heard normally, so it can be used normally. It is very rare to find a Torque wrench that can be used in a normal way. I think it is a very large thing to be able to use it normally. View detail
The scale system is still cheaper.
The readability of the values is not as good as the Digital type.
When I was using Digital Caliper every day for work, it was convenient, but when I only used it occasionally for private use, the battery was gone before I knew it, and I had to worry about changing the battery because nothing showed up on the screen when I needed it.
In this respect, the Caliper scale does not require batteries and can be used occasionally without worry.
Compared to Mitutoyo's Caliper, the movement is not as smooth and there is some rattling, but it is not something you use every day and the price is cheap, so I think it is good enough for private use.
View detail
To manage the Torque
Not used for Meta, but can be used for Opposite Thread Screw View detail
To manage the Torque
Rarely used, but can be used for Opposite Thread Screw
Minus point that the scale is difficult to read.
View detail
To manage the Torque
Rarely used, but can be used for Opposite Thread Screws View detail
Torque wrench
I have the Torque wrench of kgf-m, but I didn't have the Torque wrench of N-m, so I bought it. View detail
Very easy to use once you get used to it
I had been using a low- and high-Torque pre-road formula, but the accuracy was nowhere near as good, so I got excited.
6.It can be used in a wide range of applications because of its wide specified Torque range of 8N-m to 135N-m.
It was difficult to understand how to use it at first, but I got used to it by looking at the Instruction Manual.
Digital type is still convenient because it informs me by Buzzer.
It is also used for Tire replacement on cars.
View detail
It'll take some getting used to.
I was troubled between this product of Fujiwara Sangyo and STR3-60 of the pre-set type because the torque wrench which I am using now became old, but I decided to buy this product for the first time. I bought this product of Digital type for the first time.
It took a little time to get used to it at first because it is judged by the sound, the flashing of the LED, and the numerical value visually.
It's good to work in a position where you can see the LCD display, though, because at least you can see the values.
When I can't see the LCD display because I use it upside down, I have to rely on the sound.
Because the battery is consumed even if the power is turned off, it is troublesome to take out and install the battery, but it is said from the frequency of use, and is no problem?
The screw of the battery lid is not to come off from the lid, and the consideration not to lose it is good.
View detail
The functionality is good, but there are concerns about accuracy.
The current torque is displayed as a peak hold, which is very easy to understand, and the torque adjustment range is wide. (3-60N・m) It is very convenient.
I think it is very intuitive and well thought out without having to read the Instruction Manual.
The only thing that bothers me is that the Torque value sometimes doesn't change even though I'm tightening it, so I'm not sure about the accuracy.
I felt that I needed to tighten it consistently at a certain speed, not too slowly.
View detail