Reviews
Convenient to have
It can also measure depth, which is very useful to have.
The movement is a little stiff, but I think it is appropriate for the price.
View detail
For creating Bolt holes in Gasket
[How is it used?
I bought this to drill Bolt holes for UniversalGasket.
A 6mm hole at the Bolt point of M5 is just right, and a 9mm hole that can be used as For M8 is also a Quantity.:I chose this product because it was a Set.
How was your experience with it?
It takes only a few seconds to pull out Gasket.
I felt that the teeth were in good condition and sufficient for amateur DIY Level use.
How did it compare to other products?
Single Item's or a larger number of Quantities:Set and compared before purchase.
1 pc is rather expensive and a Quantity that contains many pcs.:We chose this product because it is not used as often as the Set product.
[Points to note]
Naturally, you will need a Hammer and a hard Seat to put down when working.
【Review】
It is inexpensive, but it has served its purpose well.
With Motorcycle, it seems that 3mm will not be available, so it would have been best if 7mm had been included instead.
View detail
A little troublesome to set up.
This is my first time using Digital torque wrench. I guess it is a matter of getting used to it, but the settings are a bit cumbersome.
As for performance, I think it's fine because it covers the most Torque range of Motorcycle tinkering.
It also provides light and sound notifications, making Torque management easy.
View detail
A must for low Torque measurements
I purchased this product to replace the stud bolt on my NSR250R Cylinder.
Low-Torque areas will be the source of Cracks if they become Overtorque even a little bit.
Torque management is essential.
So we used this one, and we are glad that we were able to use it successfully.
View detail
To manage the Torque
Rarely used, but can be used for Opposite Thread Screws View detail
To manage the Torque
Not used for Meta, but can be used for Opposite Thread Screw View detail
To manage the Torque
Rarely used, but can be used for Opposite Thread Screw
Minus point that the scale is difficult to read.
View detail
Torque wrench
I have the Torque wrench of kgf-m, but I didn't have the Torque wrench of N-m, so I bought it. View detail
It'll take some getting used to.
I was troubled between this product of Fujiwara Sangyo and STR3-60 of the pre-set type because the torque wrench which I am using now became old, but I decided to buy this product for the first time. I bought this product of Digital type for the first time.
It took a little time to get used to it at first because it is judged by the sound, the flashing of the LED, and the numerical value visually.
It's good to work in a position where you can see the LCD display, though, because at least you can see the values.
When I can't see the LCD display because I use it upside down, I have to rely on the sound.
Because the battery is consumed even if the power is turned off, it is troublesome to take out and install the battery, but it is said from the frequency of use, and is no problem?
The screw of the battery lid is not to come off from the lid, and the consideration not to lose it is good.
View detail
Bagged for easy storage
I purchased this product because I needed to take various measurements for maintenance.
The deciding factor in the purchase
I chose this product because it is inexpensive and can measure up to 100mm.
It is good for universal use because it can measure outer diameter, inner diameter and depth.
[Impressions of using it]
I don't have anything to calibrate so I don't know the degree of accuracy, but I think it's sufficient for my needs.
I used it to measure a few products and it was a solid CommaZero so I felt it was solid.
Also, it's not Level which is a problem, but it's a bit reluctant to move. I think it would be better to oil it.
I love that it comes with a bag so there is less risk of loss, damage or injury. (It's kind of lame, but lol)
Products compared
We compared it to the Digital Caliper of the same Brand and the Caliper of the Others Tool Manufacturer.
I bought it because it was relatively inexpensive and I thought that the accuracy aspect would be safe because it was a brand that I saw in Home center etc.
Also, it's not uncommon for the Digital Caliper to run out of batteries when you need to use it, so...
【Review】
It is inexpensive, easy to use, and I found it to be very accurate.
I bought a Plastic Caliper at a 100-yen store and used it once, but it was damaged immediately, so it must be made of Gold.
View detail
Wide measurement range
[How is it used?
I already have a torque wrench, but it doesn't measure low torques, so I decided to buy this product which can measure low torques.
I bought it
Was the one you received as per Image?
Image
How was your experience with it?
When it gets close to the set torque, the green lamp turns on, a pippi sound is heard, and when it gets to the set torque, the red lamp turns on.
The sound changes to a continuous beeping sound.
Even if you don't set the Torque, the value will increase as you apply Torque, so you can set the desired Torque by looking at the value.
It's Compact so it will be useful around Handlebar and Spark plug replacement.
The lid of the battery is stopped by the screw, but there is no worry about losing it because it is held in the lid side even if the screw is removed.
There is no cuckooing when you get to the setpoint.
[Points to note]
I think it varies from person to person, but I felt the sound was Large.
Even if you turn off the power, the battery is still drained, so it is troublesome to have to take out the battery after use.
Because the length is short, it may be Large strange to work near the upper limit of the measurement range.
How did it compare to other products?
The famous brand products are expensive and I was worried about the durability and accuracy of the no-name products.
It's made inTaiwan, so I think it's solid.
Here is a LINK to the Handling Instruction Manual:http://180.42.73.61/volume/00017/imag/file35273/t010003527233.pdf
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
It is essential for accurate measurements.
The Chromium Plating treatment makes the Caliper resistant to rust and highly accurate, useful for measuring the remaining volume in Brake Pads, the inside diameter of a Pipe, the inside and outside diameter of a Washer, and the thickness of a Washer, etc. A sturdy and highly accurate Caliper for those who need to measure severe values. View detail
To measure the remaining pad level, etc
I bought it to measure the amount of brake pads remaining
(Of course, you can also use it to measure other thicknesses.)
I chose the 100mm size, but I think this is enough
It's something I'd like to bring a bottle of in the family
I think it's affordable and easy to buy
By the way, it came with a leather case
View detail
very good
At first I bought a cheap Torque wrench and used it, but the response came and went I've never been able to find a reliable tool to play with the Engine I bought this one, which is relatively inexpensive, because I thought I would need it It's very handy as it notifies me with sound and light when I get close to a set torque I've seen some reviews about the battery life, but I haven't had that problem with mine It's probably a mechanism that turns off after a certain amount of time without a reaction, but if you put it in a bad way, the torque may be It keeps responding as something that is on, and I think it's because it won't turn off forever I think It's one of the best things I've ever bought, as I use it a lot View detail