Reviews
Ordinary Socket
One day I looked at the Socket set and found that the 10mm was missing, which I assumed was lost because it was used so frequently.
I purchased the SK-11 as my first choice.
It came out of the tool box after purchase. I don't care how many I have, I will use it as a Socket for Touring's tools.
View detail
Easy to use
Purchased for Small TypeRatchet, cost performance is high with Holder set. Easy to use even in tight spaces. View detail
Purchased for Torque wrench
Purchased for Torque wrench. However, the Holder cracked rather easily if I didn't pinch it properly. View detail
Torque also has a Quantity:Set is convenient
I wanted a Torque set and found the other SK11Socket easy to use, so I bought this one. View detail
I think it is very cosy. It is carefully made.
I have been using Quantity for many years now.:The socket adapter of the set finally broke. I was looking for a replacement, and this product seemed to be the cheapest and the most well-made, so I bought it. I bought it because it seemed to be the cheapest and well-made product I could find. It fits very snugly and is easy to remove, and I think it is very cost effective.
I don't know about durability, but it looks good, so I gave it 5 stars.
View detail
This is enough for the Torx bit socket of T30
[How is it used?
Used to remove the key cylinder from the Top Bridge of a YAMAHA TZr50R.
I had TorqueT40 for XJR400R Rear suspension, but the size was different, so I had to purchase additional TorqueT40 as Single Item.
Was the one you received as per Image?
It was just as Image.
I checked the size in Home center before purchasing.
How was your experience with it?
It works fine. SK11 is very good for DIY riders because of its cost performance.
[Points to note]
Not particularly
How did it compare to other products?
Torque is rarely used on domestic cars, so I think that SK11's most cost-effective tools will be enough without buying expensive ones.
View detail
under compulsion
I lost my 24mm Socket for Elumi's Castle Nut, and although I rarely use 24mm, I needed it, so I purchased the SK11 SK11 Socket 24mm this time, considering the cost performance.
9.I was torn between 5mm and 12.7mm, but decided to go with 9.5mm since Motorcycle uses 9.5mm as a base.
The quality is good and they are a reliable Manufacturer that I have purchased many other things from.
View detail
Ordinary Socket
Motorcycle Stand Lift I purchased this for the purpose of lifting Jack.
Lift up the BOLT Shoulder Bag, but it is a one-person Motorcycle straddle and cause the Jack under the belly Quantity.:Set.
At this time, the BOLT Shoulder Bag has a very good footing and a low center of gravity, so the Motorcycle is less likely to become unstable even when bending forward.
When I operated the jack for the first time after purchasing it, I used my MONKEY Wrench, but I thought a manual ratchet wrench would be more convenient for operating the jack, so I decided to use this product, which has a standard that fits the ratchet.
Since the main application is Jack elevation, I think the durability is infinitely etc.
I have operated with Impact wrench, but it is difficult to operate Throw alone, so I think Hand tool is better without danger.
View detail
As an on-board tool for motorcycles
I purchased this as an on-board tool for my motorcycle.
I had a Socket set as my main tool, so the low price and the One Touch Socket Holder were the deciding factors in my decision to purchase it as an in-vehicle tool.
The quality is perfect for normal use, as is the low price.
View detail
Gold is distinctive
Available in 3mm to 12mm, Quantities are more affordable than Single Items.:Set is a better value.
I think the quality is good enough, as I have never had any licking while using it.
For clarity, we have used TEPLA to indicate Size.
View detail
It's cheap
It is inexpensive, of good quality, and useful.
Theplastics are used to indicate Size for ease of use.
It also comes with a One Touch Socket Holder, which is a great value.
View detail
For maintenance.
The length is just right and can be used for different purposes.
The longest one in particular is now required to remove the Plug.
View detail
Used to remove Plug
The ZrX1200R plug is quite far back, so it is much easier to do without this product.
I think it is a useful tool to have in places where other tools are difficult to access.
View detail
More than the price
Tools are required to be precise, and I think SK11 has a lot of good products for the price. View detail
Convenient Socket adapter
[How is it used?
Used for tightening at 40N-m when cleaning and installing Caliper on XJR400R.
I have two Torque wrench, one for ~25N-m and the other for 40-140N-m, but one of them has a 12.7mm insertion angle. (1/2-inches) and the other is 9.5mm (3/8Inch) The Brembo caliper mount bolt is 12mm, but the 12mm socket I have is 9.5mm. (3/8Inch) So I needed a conversion and bought this one.
Was the one you received as per Image?
It was just as Image.
I think you can find them at Home center, but I'm glad to know that they are not available at small places and that it is cheaper to buy them here.
How was your experience with it?
Thanks to this, we were able to tighten it with a solid Torque.
I want to make sure that the Brake area is secure because if anything happens to the Brake area, it will be Large strange.
How did it compare to other products?
I have seen other manufacturers' products, but I think this one is the cheapest and has the best cost performance.
View detail
It works fine.
[How is it used?
Compressor at home and Air duster of the same Brand (https://www.webike.net/sd/23110545/) I purchased this product in conjunction with the purchase of
I referred to Air duster's product description and chose this Screw size as it fits.
How was your experience with it?
The product itself could be used with no problems at all.
We also installed a Spray gun at the same time, which also came with the One-touch plug, but the Air duster was also included in the package. (Lol)
So, I originally did not have to buy it, but I did, so I kind of replaced it and am using it.
How did it compare to other products?
It is naturally no different in any functional way from the one originally included.
I use it in combination with an air hose of another brand, and I don't see any air leakage because it is a standard product.
[Points to note]
The Air duster of the same brand does come with a one-touch plug!
【Review】
Naturally, there were no problems at all in combination with other Brand's Air hose.
It is inexpensive, but it works well.
View detail
No problem
[How is it used?
Installed Compressor at home for painting and Spray gun of the same Brand (https://www.webike.net/sd/23110537/) I purchased this product in conjunction with the purchase of
I chose this Screw size because the Spray gun said it would fit here.
How was your experience with it?
The product itself could be used with no problems at all.
However, the Spray gun also came with a one-touch plug, so it was not really necessary.
I was so determined that I decided to replace it with this product and use it.
How did it compare to other products?
I have not experienced any one-touch plugs going bad, but they are inexpensive and I have had no problems with them.
[Points to note]
SK11's Spray gun comes with a One-touch plug! (Lol)
Also, I would like to have Seal tape.
【Review】
It is inexpensive, but I had no problem using it. Naturally, there is no air leakage.
Don't forget to prepare seal tape and a 17mm Spanner for replacement.
View detail
For Torque wrench
Purchased hex bar Bit for use with Torque wrench.
If you have a lot of Bit tools, this one is good for more situations you can handle.
View detail
For removal of Bolt from Suspension
[How is it used?
YAMAHA XJR400R (07) The Exhaust System Hanger was used to install the Exhaust System Hanger on the Suspension of
The bolt that fixes the suspension of XJR400R is a 10mm hex lobe bit, but a tamper-resistant bolt is used. I used this product to remove it.
Was the one you received as per Image?
It was exactly as shown in the Image. The texture of the product is good and I can use it for a long time.
How was your experience with it?
It is easy to use. It has a luxurious feel.
It is a product that is not usually used, but it is a must-have when performing suspension-related work.
[Points to note]
nothing special
How did it compare to other products?
The same product is available from other manufacturers, but I think SK11's product has the best Cost performance.
View detail
9.I wanted 5mm.
I use an Impact Driver for APRIO Clutch maintenance, but it only has a 12.7mm 24, and I wanted to use a 9.5mm driver because it was troublesome to replace the Adapter and other parts.
If I use 9.5mm to tighten or loosen 24mm, I may break Adapter or Socket wrench by Overtorque, but I would like to use 12.7mm in that case.
I often use SK11 tools because they are cost-effective.
View detail