Reviews
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
Hexagonal holes make installation cheaper
Installation of the Stud bolt to the cylinder head with a special tool or double nut But this product has a hexagonal hole and it is cheap to install Because the Cap Nut was shown in the picture, I thought that the Nut might be included, but it is not I installed it with a handheld Flange nut and I'm happy with the length of the Bolt View detail
Fits: HONDA XR50 Motard, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 50
Quantity:1 Set of 3-items
Quantity of Oil Seal that can be replaced without breaking the Engine Crankcase:1 Set of 3-items Originally, I replaced the oil sealRip part with this one No problem View detail
oil breather
a very good quality product, I'm very satisfied with this purchase, i feel I'm able to release some excessive heat and pressure out of the engine crankcase though i don't have any data to prove it, because i changed to bigger piston and block from 155cc to 200cc i think there'll be extra heat and pressure which the original engine compartment would have difficulty to handle. View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
Easy to install
I installed it in MONKEY.
Because of the hole of for Hexagonal Wrench,
The installation was very easy.
I am satisfied because the length is just right and the texture is solid as well.
View detail
It is a good product
I got you to exchange Sleeve with Bore upService. I exchanged carburetor for PC 20 and had difficulty setting up, but now I have come to the point where somehow compromised. Engine Power has a feeling of raising to about twice. Previously it was possible to run Torque fully even at 4000 rpm that I could not run unless I had to rotate it more than 8000 rpm and I will go to the Red zone. I finally got to LEAD what I was running running on the current. View detail
Fashionable appearance
Since the tip of Breather hose of Motorcycle bought in second hand was cut-off, I bought it for the purpose of Dress-up, since I have Inner sleeve, I can firmly install it, I am satisfied with appearance Up! View detail
Fits: HONDA Ape 100 Type D, HONDA Ape Type D, HONDA XR50 Motard, HONDA XR100 Motard, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA XR50 Motard, HONDA XR100 Motard
very good
Checking Oil amount is a little unclear, but it is a good Ideas that can be used in conjunction with depressurization
The price is moderate, and I'm with Anodized color
Hose, including Band is also appreciated
As for use, I feel that the inner diameter is thin, but for now it is no problem
View detail
Just right Size
I changed the AirCleanerBox of CROSSCUB to Other Company Product, so I tried using it. Size is perfect, it feels nice. I think that it seems that the connection port of Hose seems to be durable even if it is a Gold genus. View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
Only the bolts no studs..
Am I the only one that thought there would be also flange nuts included in this kit? Was a waste of money obviously.. Also for most Honda models 6x35 is more suitable.. View detail
Fits: HONDA XR50 Motard, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 50
Very satisfied
Crank bearing purchase for exchange
Because I ordered in a hurry Quantity : 1 Set of 4-items was necessary but one remaining store purchased as Single Item
If you divide Crankcase Quantity : 1 Set of 4-items Recommended
As a product Oil It was satisfied without leakage and made it to 5 stars.
View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
The attached Cap Nut's Tap is rough...
Stud bolt itself is a Large fancy good product.
In OEM's Stud bolt, Nut often does not cover the flange of the external exhaust system, but if you replace it with this item you will not be worried.
I do not know whether it is an individual difference, but the attached Cap Nut did not engage the stud bolt at all. I thought that it was a defective item or a mistake to put it in.
Of course, it can not be said that there is no problem as we did not intend to use Cap Nut...
I think that it becomes easier to purchase it as a consumable item when it becomes less expensive without Nut.
The hole of for Hexagonal Wrench is opened at the head of Bolt, and the point that it can be easily inserted into Cylinder is Large.
It was a truly commodity that Bolt was unable to use.
View detail
This is a nice little filter, meant for breather purposes but ideal for use on the PCV solenoid when modifying the air intake on a Ruckus. Good quality and perfect fit.
This is a nice little filter, meant for breather purposes but ideal for use on the PCV solenoid when modifying the air intake on a Ruckus. Good quality and perfect fit. View detail
It is good when new - - -
KITACO's VM 26 Manifold is used for Ape 100
Keihin PE 26 is installed.
Because KITACO's RubberInsulator has failed
Purchased as for Repair.
When it is brand new, there is no problem
Secondary air generation occurred after 2 years ago,
Quantity : 2pc. I purchased a set of eyes.
A bit more durable Does anything matter?
I appreciate that there are such Repair Parts.
View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
For OEM exchange
In order to remove the OEM Stud bolt it takes more work than grabbing the usual Bolt such as grinding with a special tool, Double nut, Burner and turning it with Vise etc, but this Stud bolt can use Hexagonal Wrench so Maintenance property I think that is high. Nut comes with Cap Nut instead of normal Nut. View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
On waist OH
I exchanged the Stud bolt all over the Overhaul on the waist. Even OEM was good, but to SHIFT UP. Although I noticed it while I was building it, there is a hole that can use a hexagon at the center of Bolt! Is not it a consideration that I can use without tightening with Double nut? It is a good item anyhow. View detail
No Brown 苦 Brown Good
I purchased this as I got lost as 7 mm STUD when making it 107 cc.
I think that it was the best judgment as a result.
Quality is also good and can be fastened tightly.
There is not much feeling twisted like an OEM (There is one thing) , Too hard feeling
Without feeling exactly. I'm sorry it is hard to communicate.
There are no defects when using it with 107 cc.
As far as this Stud is concerned, we use Screw lock on Crankcase side
If not, it remained when tightened "Twist" It will become loose when returning.
In any case it is necessary to retighten one or two times after assembling.
Generally, it is a good product that is very firm though it is inexpensive.
I will recommend this product if you are worried about reinforced Stud.
M7Stud is also good, since that is only the Screw part of Head is M7,
The strength of Shaft is the same as normal M6.
View detail
In Restore
I used it for MONKEY in one restore. OEM Parts Number is also not a hands-on wage but I made SHIFT UP with strange adherence that it is a set of set. I am having fun while comparing with OEM Parts Number in hanghang and Restore. View detail
Fits: HONDA XR50 Motard, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 50
As a substitute for OEM Parts Number
I found oill bleeding from the Shift arm part, so I decided to exchange each Seal.
It was possible to install without problems as a substitute for OEM Parts Number.
There is 100 for the same Manufacturer similar set item, but please be careful when buying it because the thickness of the Shift arm part is different for 50.
View detail
LongHead nut is good
When Bob UpEngine's Overhaul, exchanging, Stud bolt itself feels more rigid than OEM Plating's LongHead nut is very good It is inexpensive compared to Posh's LongHead nut I think that it is a bargain when considering price View detail
Is there cooling effect or mystery.
Is there a cooling effect ?? Well, although I do not necessarily expect or do not expect cooling effect though (Lol) It is beautiful with Polished! View detail