Reviews
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE TypeD, HONDA APE 100 TypeD
SHIFT UP Handle Bracket Set
About quality and texture It is simpler than the standard About the feeling of use It is well secured, but the add-ons could not be installed Products to buy together SHIFT UP Billet Stem Nut Difficulty of installation easy Cost performance and comparison with other products If you purchased only the top bridge, I recommend you to purchase and install the SHIFT UP Billet Stem Nut About shipping and packaging It took three months and the packaging is excellent Any concerns, cautions, or advice when purchasing I waited three months to get a clamp, but I knew my choice was right I like the metal on the shift-up View detail
Fits: HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA XR100MOTARD
SHIFT UP Billet Stem Nut
About quality and texture The deadline is very good About the feeling of use It was made to match the top bridge Products to buy together SHIFT UP Billet Top Bridge / Clamp Set Difficulty of installation The fuel tank must be removed and installed Cost performance and comparison with other products be thicker than standard About shipping and packaging It took three months and the packaging is excellent Any concerns, cautions, or advice when purchasing Many shift-up products in my ape100 are being installed in dry metal color. This item is also installed in dry metal and is satisfied View detail
แผงคออย่างเท่ห์เพื่อนๆอิจฉา View detail
SHIFT UP front fork set
About quality and texture It's lighter than normal. And it's a product for a clean finish About the feeling of use It feels like the steering wheel has become lighter Products to buy together SHIFT UP Reinforced Front Fork Spring ,SHIFT UP Shift Load Adjuster , front fork oil Difficulty of installation Adjusted and fixed little by little with a rubber hammer The difficulty level of installation is moderate Cost performance and comparison with other products Compared to the normal one, the design has become neat About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing SHIFT UP SHIFT LOAD ADJUSTER PRODUCTS MUST BE INSTALLED WITH THIS PRODUCTS It's light, but I don't think it'll make a big difference If the normal product is old and old, I think it's better to replace it View detail
Best
I think it is indeed JAPAN. The quality and workmanship are different. View detail
pleasant to look at
My first impression was that it was very light and I had a good impression even before I put it on.
The installation was a simple task as I was changing to a separate handle. There seems to be no difficulty in installation.
View detail
Good NORMAL-ish.
I bought it to build a NORMAL looking car, although I built the MONKEY ・GORILLA system with Other Brand Product other than the frame.
Installation is easy, and if you use Harness, which uses the speed warning light released by the company, you don't have to worry about forgetting to turn it off because it also becomes an Indicator.
The texture is good, and it blends in so well that you wouldn't know it if it was called NORMAL.
If you're changing your Clutch and prefer a NORMAL look, this is the Parts for Recommendation.
View detail
For the XR100MOTARD, which is hard to bend
The XR100MOTARD is a hard-to-bend XR100MOTARD, and the Caster Angle and the amount of trails are shown in the specification sheet American! Let's stick out the Front fork a little bit But it is physically impossible for the OEM Top Bridge to make this spec Then, I looked for it here, fortunately it was in stock and I ordered it If you stick out the front of the bike, the front end of the bike will be just like a normal motorcycle Cut-out Aluminum Alloy is also used to remove the meat You can use the OEM Handlebar Bracket as is It will look better and it's a good price for this price View detail
I'm happy with the way it's built
Handlebar Post area View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE TypeD, HONDA APE 100 TypeD
Disked at XRMOTARD's Fork
I put XRMOTARD's Front fork, Wheel in APE and made it disc.
In that case, because Front fork will be longer by about 3 cm, I used it in the Top Bridge of SHIFT UP and made it a Separate handle.
However, I wanted to change to Pipe Handlebar so I added this item later.
First, if it is 3 cm protrusion, it will interfere with Initial Adjuster if it is a lower Handlebar. (Initial Adjuster of the company)
So I made it less than 1 cm, not to interfere by losing protrusion.
Also, I have attached KITACO's MINIMini meter in duplicate.
This Meter is careful as it will interfere with the Top Bridge unless you enter Color.
There are two Screw holes on the Reverse side of this product, Clamp, I think that it is better to be able to change the position of the Handlebar depending on which one you choose.
If you want to use the Top Bridge of SHIFT UP as a disc, it is recommended.
View detail
Luxury feeling, rigidity UP
I thought about looking at the pictures and trying to buy it immediately, but because it was not written as conforming to FIMONKEY, check if it conforms to Bear MONKEY and purchase.
Since I wanted to unify the area around Top Bridge with Black, I purchased it as planned to change from Gold of Top Bolt Kit of installed Mukawa to Black.
When it comes to replacing it, it was found from the OEM's Bracket that the top Bolt Kit of Mukawa river was interfered and could not be installed because the width was about 3 mm wider. At a later date, Top bolt fixed as M10 Cap Bolt to exchange for other things and finished work
Replacement is completed in about 20 minutes.
View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA APE TypeD, HONDA APE 100 TypeD
Easy to replace, luxurious feel UP
I was not adapted, but attached to the bear MONKEY.
Previously I installed Mukawa river AluminumClear type, but I was lucky to find Black because the car is Black so I was looking for Black.
View detail
cool
There is a feeling of luxury not to be compared with OEM.
I will do a certain amount of gold, but it does not feel like I lost it.
However, it's too polite, so I want to customize other parts.
View detail
Appearance GOOD
Because the Handlebar of GoldMONKEY purchased in second hand was changed every Bracket, when I returned to Round and round Handlebar, I wanted to make Knob Gold, so I purchased this product of Bracket by Black and Knob by Gold. The appearance looked like Image good feeling, the installation was easy with Bolt-on. View detail
Handling has improved..
Fork mounting accuracy (Strength) Because it went up, the movement of Fork got better.
Tada, it is a designation to raise Inner Tube upward, but when you do that, Handling will be Quick. I extended the Inner Tube to prevent it.
View detail
MONKEYSwitch box
I got lost as Push cancellation formula, but OEM style was good and I made this product! I am satisfied with Simple and OEM like appearance, but the Horn switch is hard to push hard but I am dissatisfied. View detail
Rigidity UP
It is obviously thick and solid compared to Normal top bridge, remove Normal top bridge Quantity : Pair (for Left and Right) Height was different when measuring the height of.
I think the Top Bridge needs to be replaced on a regular basis.
It looks pretty good so I installed it correctly.
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD
I do not know how the performance is, but luxury
The time it took to install is about an hour or so.
It looks like a luxurious feeling comes out.
I tried running, but I did not understand the performance at all.
But I am satisfied because it is important to look good.
View detail
I am satisfied..
To acquaintance who is tinkering with old MONKEY "RightBlinker is hard to use so buy for Left" I was asked, I made this item here.
It was just as good as Silver like NORMAL was hopeful.
It was better if Push cancellation was on.
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD
When changing into a Separate handle from the Handle of a NORMAL, it surely wanted and purchased.I think that also making is solid and there is also intensity of enough.Although it is used in the Race, it is satisfactory at all. Good shopping
When changing into a Separate handle from the Handle of a NORMAL, it surely wanted and purchased.I think that also making
is solid and there is also intensity of enough.Although it is used in the
Race, it is satisfactory at all.
Good shopping was made.
View detail