Reviews
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE TypeD, HONDA APE 100 TypeD
SHIFT UP Handle Bracket Set
About quality and texture It is simpler than the standard About the feeling of use It is well secured, but the add-ons could not be installed Products to buy together SHIFT UP Billet Stem Nut Difficulty of installation easy Cost performance and comparison with other products If you purchased only the top bridge, I recommend you to purchase and install the SHIFT UP Billet Stem Nut About shipping and packaging It took three months and the packaging is excellent Any concerns, cautions, or advice when purchasing I waited three months to get a clamp, but I knew my choice was right I like the metal on the shift-up View detail
Fits: HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA XR100MOTARD
SHIFT UP Billet Stem Nut
About quality and texture The deadline is very good About the feeling of use It was made to match the top bridge Products to buy together SHIFT UP Billet Top Bridge / Clamp Set Difficulty of installation The fuel tank must be removed and installed Cost performance and comparison with other products be thicker than standard About shipping and packaging It took three months and the packaging is excellent Any concerns, cautions, or advice when purchasing Many shift-up products in my ape100 are being installed in dry metal color. This item is also installed in dry metal and is satisfied View detail
SHIFT UP front fork set
About quality and texture It's lighter than normal. And it's a product for a clean finish About the feeling of use It feels like the steering wheel has become lighter Products to buy together SHIFT UP Reinforced Front Fork Spring ,SHIFT UP Shift Load Adjuster , front fork oil Difficulty of installation Adjusted and fixed little by little with a rubber hammer The difficulty level of installation is moderate Cost performance and comparison with other products Compared to the normal one, the design has become neat About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing SHIFT UP SHIFT LOAD ADJUSTER PRODUCTS MUST BE INSTALLED WITH THIS PRODUCTS It's light, but I don't think it'll make a big difference If the normal product is old and old, I think it's better to replace it View detail
For the XR100MOTARD, which is hard to bend
The XR100MOTARD is a hard-to-bend XR100MOTARD, and the Caster Angle and the amount of trails are shown in the specification sheet American! Let's stick out the Front fork a little bit But it is physically impossible for the OEM Top Bridge to make this spec Then, I looked for it here, fortunately it was in stock and I ordered it If you stick out the front of the bike, the front end of the bike will be just like a normal motorcycle Cut-out Aluminum Alloy is also used to remove the meat You can use the OEM Handlebar Bracket as is It will look better and it's a good price for this price View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE TypeD, HONDA APE 100 TypeD
Disked at XRMOTARD's Fork
I put XRMOTARD's Front fork, Wheel in APE and made it disc.
In that case, because Front fork will be longer by about 3 cm, I used it in the Top Bridge of SHIFT UP and made it a Separate handle.
However, I wanted to change to Pipe Handlebar so I added this item later.
First, if it is 3 cm protrusion, it will interfere with Initial Adjuster if it is a lower Handlebar. (Initial Adjuster of the company)
So I made it less than 1 cm, not to interfere by losing protrusion.
Also, I have attached KITACO's MINIMini meter in duplicate.
This Meter is careful as it will interfere with the Top Bridge unless you enter Color.
There are two Screw holes on the Reverse side of this product, Clamp, I think that it is better to be able to change the position of the Handlebar depending on which one you choose.
If you want to use the Top Bridge of SHIFT UP as a disc, it is recommended.
View detail
cool
There is a feeling of luxury not to be compared with OEM.
I will do a certain amount of gold, but it does not feel like I lost it.
However, it's too polite, so I want to customize other parts.
View detail
Handling has improved..
Fork mounting accuracy (Strength) Because it went up, the movement of Fork got better.
Tada, it is a designation to raise Inner Tube upward, but when you do that, Handling will be Quick. I extended the Inner Tube to prevent it.
View detail
I am satisfied..
To acquaintance who is tinkering with old MONKEY "RightBlinker is hard to use so buy for Left" I was asked, I made this item here.
It was just as good as Silver like NORMAL was hopeful.
It was better if Push cancellation was on.
View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD
When changing into a Separate handle from the Handle of a NORMAL, it surely wanted and purchased.I think that also making is solid and there is also intensity of enough.Although it is used in the Race, it is satisfactory at all. Good shopping
When changing into a Separate handle from the Handle of a NORMAL, it surely wanted and purchased.I think that also making
is solid and there is also intensity of enough.Although it is used in the
Race, it is satisfactory at all.
Good shopping was made.
View detail
Since he wanted for the Bolt which has fixed the Fork of the Top bridge to have rusted and to exchange for an Initial Adjuster, Top bridges were also exchanged together. While it was near well, it was rusty, and I think that it is exchangeable if th
Since he wanted for the Bolt which has fixed the Fork of the Top bridge to have rusted and to exchange for an Initial Adjuster, Top bridges were also exchanged together.
While it was near well, it was rusty, and I think that it is exchangeable if there are even knowledge and a tool about
exchange (smile) and it is for as long as 1 hour.
Since it is narrow when it is a MONKEY, although the
Stainless nut is 29 mm, I consider it as it is easier for there to be a Socket.
(He borrowed from his friend) With the
MONKEY, to be useless, while the Top bridge is attached, it is necessary to remove a Handle bracket.
(When exchanging for a strengthening Fork spring, it did so) Although there are some which are not attached unless some Manufacturers besides
make a Light stay into 50 cc, even a 100-cc Light stay is OK here.
Appearance is preeminently good although the direction of the
effect is not known!
When merely taking out the Stainless nut with the Gun meta, the Top bridge also wanted the Gun meta...
View detail
[Webike Monitor] The pure Top bridge of the APE was like [ black iron ] the lump, and since he had a cheap feeling, it was purchased. Since the price was cheap compared with other Manufacturers, this product was chosen. When attached, compa
[Webike Monitor] The pure Top bridge of the
APE was like [ black iron ] the lump, and since he had a cheap feeling, it was purchased.
Since the
price was cheap compared with other Manufacturers, this product was chosen.
When attached, compared with former, the high grade feeling came out at a stretch!
The Shift road adjuster of the company was also attached simultaneously again!
Although structure is also satisfied well on the whole, it is somewhat regrettable that the visible place had a crack.
View detail
Fits: HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA XR100MOTARD
If it exchanges for an external top bridge from a pure top bridge, the pure stainless nut has been conspicuous from the relation of a color. Then, it exchanged for this stainless nut. Although the engine performance in particular does not change,
If it exchanges for an external top bridge from a pure top bridge, the pure stainless nut has been conspicuous from the relation of a color.
Then, it exchanged for this stainless nut.
Although the engine performance in particular does not change, it builds and texture is very satisfactory.
View detail
It purchased in order to attach the initial adjuster of the company. A parenthesis is good, and a design also becomes tight and is visible. Since its ape is a separate handle, a handle clamp is unnecessary and has attached the meter stay of the da
It purchased in order to attach the initial adjuster of the company.
A parenthesis is good, and a design also becomes tight and is visible.
Since its ape is a separate handle, a handle clamp is unnecessary and has attached the meter stay of the daytona using the hole for a clamp.
I want the type with which the hole of meter stay attaching is made by the object for separate handles to come out. --
View detail
With goods of this sort, since it was the cheapest, it purchases. However, the result was good enough. Although it is better to prepare the type which therefore does not have a postmounting hole as an object for separate handles with much trouble.
With goods of this sort, since it was the cheapest, it purchases.
However, the result was good enough.
Although it is better to prepare the type which therefore does not have a postmounting hole as an object for separate handles with much trouble.
View detail
Fits: HONDA APE TypeD, HONDA APE 100 TypeD
It is not a thing which can adjust Faulk's pushing out, either, and the normal top bridge of an ape is thin and cheap. Although it had come out of various top bridges of an external article, since the shift up products which are carrying out goods dep
It is not a thing which can adjust Faulk's pushing out, either, and the normal top bridge of an ape is thin and cheap.
Although it had come out of various top bridges of an external article, since the shift up products which are carrying out goods deployment under the influence of angry waves having been worrisome, and a handle clamp were also attached to 4 SUTOMINI meetings recently, it purchased.
Handlebar outside carries out attachment, normal top bridge outside carries out, and I think that there is no difficult thing especially since it only attaches in the reverse procedure.
Although it is ? whether rigidity went up, the image of the circumference of a handle becomes tight at a stretch.
Faulk's pushing out can also be adjusted, and since the texture of the product itself is also quite a thing, I think that this is good.
View detail
buying it absolutely -- it is -- !. this article -- this price! Satisfied.
buying it absolutely -- it is -- !. this article -- this price! Satisfied. View detail