Reviews
Separate handle from …
I didn't want to break the Separate handle in style, but …
Every time I did 200km OverTouring, my back and wrist were screaming.
I made the hard decision to go with Bar handle.
There were various Handlebars, but
I was considering DAYTONA, HARDY, and HURRICANE.
Too wide or too tall…
There is a Handlebar just right from Mr. SHIFT UP after troubling, and
The price was inexpensive, so I bought it right away.
I feel much better, but on the other hand, my hips hurt!
View detail
สินค้าที่ได้รับคุณภาพดีมากค่ะ จัดส่งรวดเร็ว แจ้งสถานะให้ติดตามได้ตลอดว่าตอนนี้สินค้าถึงไหน แอดมินประสานงานได้รวดเร็ว สินค้าไม่เสียหาย View detail
Fits: HONDA MONKEY
Solidly built
It comes with Brackets and Bolts for both 10Inch and 8Inch, so you can change the spec.It even comes with a Washer for adjusting the angle of the Fender.
But the price is too high.
View detail
Plating is beautiful!
Plating is thick and as clean as OEM.
But the bulbs are too dark. So I changed to LED.
View detail
Good NORMAL-ish.
I bought it to build a NORMAL looking car, although I built the MONKEY ・GORILLA system with Other Brand Product other than the frame.
Installation is easy, and if you use Harness, which uses the speed warning light released by the company, you don't have to worry about forgetting to turn it off because it also becomes an Indicator.
The texture is good, and it blends in so well that you wouldn't know it if it was called NORMAL.
If you're changing your Clutch and prefer a NORMAL look, this is the Parts for Recommendation.
View detail
Used for assembly from Frame
It can be used safely because it is a loosening stopper nut. View detail
There is a sense of quality
I had an Extension Bolt on it, but replaced it with a tool-less one because it was a pain to use the Wrench every time I removed the Seat.Material:I considered the Plastic one, but I thought it would look cheap, so I went with the pricier Material.:I decided to use Aluminum. There is a sense of luxury, and the part to be inserted is thick, too, and it is easy to frame it in the Screw hole. View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
When replacing the Exhaust System
[How is it used?
When we replaced the Exhaust System, the length of the OEM Stud bolt was not enough.
Was the one you received as per Image?
As per Image
If I had to say, Plating is cheesy.
Was the installation difficult?
Just remove the OEM Stud bolt with a Double nut and install it. This bolt is EnamelScrew and has a hexagonal hole so you don't need to use Double nut to install it.
How was your experience with it?
Screw length has been increased so that Nut is hung firmly and it is safe.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
How to do double nut (https://www.google.co.jp/amp/s/www.webike.net/magazine/maintenance/maintenance-special_tools/59268%3famp=1)
View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
Engine Full OH
I used it for a full Engine OH on my CUB90!
OEM Parts Packing set (Gasket Set) includes Shift, Brake, and KICK Seals in Quantity.:It's not a Set.
Crank Packing is Quantity:Set.
When I open the Crank, I rarely open it, so I keep this one as a spare and use it as a
I feel like once you change it, you don't use it as much Shiftetc. Seal uses it to finish it off!
There's none of that Oil blotting or anything like that, so I think it's a good idea to use OEM with this stuff!
View detail
Was good
I like to use it because it's my preferred height, width, squeezing and drooping. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA BENRY CD50, HONDA monkey, HONDA monkey
Piston rings
I had to change my segments after opening the 88CC Shift-up engine because there was a problem with the piston, for the very low price as much to take advantage of it and change them with new ones as well as engine gaskets. Everything is very easy to install, the segments are marked so it's not possible to go wrong. Check well on the manufacturer's website to buy the right segments because there are several references, this one the 205088 is for the 12V piston. -------------------------------------------------- -------- I had to change my segment after opening the Shift-up engine 88cc problem because the plunger to the very reduced prices as well take advantage and change them with new motors and joints. Everything is very easy to install, the segments are marked therefore not possible to verify tromper. Powered by Google Translator View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
Shift up dowel pin set
I used these stud sets when I dismantled my Dax engine to put a 110cc kit from shift up. it is easy to install but pay attention to the different sizes of the studs, we can help the engine technical reviews to take the stud to the right size and if you want to replace old ones that like me were worn, you have to a little forcing. Given the quality of this brand I preferred to take this set shift up and I do not regret it! Great brand! -------------------------------------------------- -------- I used these stud set as I removed my Dax engine to put a 110cc kit from shift up. it is easy to install but pay attention to the different sizes of bolts, we can help engine techniques well reviewed to take the pin to the right size and if you want to replace old like me were worn, it must a little force. Given the quality of this brand I prefer to take this set up shift and I do not regret it! Great brand! Powered by Google Translator View detail
for MONKEYShiftHandlebar Up TypeKnob
Perfect for adding Accent to Handlebar Post of MONKEY.
It is easy to install.Color variations are also available to match your MONKEY Image.
You can easily dress-up your Handlebar with Gorgeous.
The texture is of high quality. Glad I bought it!
View detail
For Stand Hook.
The main purpose of the Stand Hook is to prevent the Bolt from being damaged in a fall, but I use the Stand Hook here. View detail
honda-manki
strengthens the steering wheel well, but slightly overlaps the speedometer. To install, you need a key and slide the straps on the steering wheel harness. -------------------------------------------------- -------- well strengthens the wheel, but slightly overlaps spidometr.chtoby set the required key and move the straps on the handlebar fixing wires. Powered by Google Translator View detail
Fits: HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR50, HONDA NSF100, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR50, HONDA NSF100
Poor aesthetics
Shift up this brand of products, the price is close to the people, and there are many choices in terms of color, but it is a pity that this product fails in the shape of the product. If you are more beautiful, you can choose the same type of product. View detail
Beautiful and nice
Because the brakes of my xr motard are front and rear discs, I have been struggling to find the same and beautiful discs of the front and rear brands. In the end, only the shift up front and rear spray discs have a variety of colors to choose from and are beautiful in appearance. I am very satisfied View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
I put it on my CB125T, although it is not a compatible model.
I am using CB125T(JC06 Frame No.120000~) and my weight is 68kg.
Fork oil is #15 in OEM quantities.
I've been riding with the default settings, and I've noticed that when I apply the front brake, the bike doesn't sink as much, and I've been able to get a better ride.
It doesn't pick up too many bumps in the road, which is pretty nice.
However, since the Pre-road is applied from near the weakest state, the Rider with light weight can
There is no adjustment fee and I do not recommend it.
On the other hand, we would like to recommend this parts to riders who weigh 70kg~.
View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
A necessity!
I used Silicon grease when I installed it on my Monkey. I used silicon grease when I installed it, and I have no problem with oil leak etc.:It's good to be able to buy a Set with peace of mind, and if you're going to Rose an Engine, you should buy one! View detail
Many colors
The price is a bit expensive, because I use it on XR50 motard, but it has a variety of colors to choose from, which is very satisfactory to me View detail