Reviews
To Neo Kula Helmet!
I use it with SHOEIEX-zero and Twin Shock Motocross. 。 I think it would look great on a recent SCRAMBLER.
The ones from back then are too tattered to use, but this one can be used on a daily basis.
It lacks specifications for serious racing, but is fine for forest roads.
View detail
SCOTT:Scott Double Lens for Primal/SplitOTG
[How is it used?
Seeking Goggles that don't fog up
Was the one you received as per Image?
As cool as the Image.
How was your experience with it?
It's the GogglesParenthesis that doesn't fog up.
[Points to note]
Be careful not to bend it during installation.
How did it compare to other products?
As cool as the Image.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
SCOTT:Scott SplitOTG [Color] Clear Goggles
[How is it used?
Seeking non-fogging Goggles that Glasses can fit in.
Was the one you received as per Image?
As cool as the Image.
How was your experience with it?
As cool as the Image.
[Points to note]
Consumables.
How did it compare to other products?
Goggles that do not fog up.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Visibility and durability are both good.
This is my fifth purchase with Prospect and Fury.
There was a Prospect in Pink around 2016-2017 and I liked it and used it, but there are also Downs.
I was looking for a replacement and when Fury came out with a similar design, I bought it.
Compared to Prospect, "it's like a normal Goggles", but I'm satisfied with the ability to share Lensetc.
So far there is no Trouble of cloudy etc.
View detail
Lock Function of Shield is 0
The Band on my previous Goggles had grown out, so I replaced it with Scott's Goggles, which were recommended to me by a friend.
Mirror Lens, but Clear Lens is also available in Quantity:1 pc. attached so it can be replaced on bad weather days.
I wondered about the visibility in the shady Woods, but even with Mirror Lens I had no problem.
The Lens is replaced by a Type that unlocks the top and bottom four locks, so it has a nice tight fit and is easy to remove once you get used to it.
The frame does not protrude too much, which is far from the exterior, so it has a wide field of view.
View detail
It's okay
If care is not taken during installation, the edges will flap while driving.
velocity
View detail
A valuable option
Face masks used with Goggles...used to be used by OffLoaders with Jet type helmets, and I myself switched from full face to face masks because of the visibility and openness.
However, these days, full face masks are all the rage, perhaps because of their parenthesis and safety. Face masks and off-road type jet helmets have almost disappeared.
However, I am not satisfied with the Face mask because of its boring design, black color only, and high price.......
View detail
Can wear glasses
I have been looking for a kind of goggles that can put myopia glasses in, but there are few goggles on the market, until I bought this goggles on webike to solve my big problem. This SCOTT Split OTG is a goggles compatible with glasses, and can permanently prevent fog and condensation, and has a very strong impact resistance. View detail
Support wearing glasses
Since I am nearsighted, I have been looking for a goggle that can put myopia glasses in, but there are few such goggles on the market, until I bought this goggle on webike to solve my big problem. The SCOTT Split OTG is a goggle that is compatible with glasses and permanently prevents fogging and condensation, and is also very strong in impact resistance. -------------------------------------------------- -------- Because I am myopia, I have been looking for a wind mirror that can put myopia glasses in. There is no helplessness on the market that there are relatively few bell mirrors on the market until I bought this wind mirror on Webike to solve my big problem. This Scott Split OTG is a compatible mirror compatible with glasses, and can permanently prevent fog and knot dew, and the impact resistance is also very powerful. Powered by Google Translator View detail
Roll-off with the widest field of view.
We use it for Enduro race.
Perhaps it is the widest Roll Offset?
The Motor cord takes a bit of effort to pull, but it is manageable even when I lost my grip on the Race. The Motor cord takes a little bit of effort to pull, but it is manageable even when I lost my grip on it during the Race.
The kit is in the form of a film, so it was a little tricky to install, but anyone can do it if they are careful. The film that prevents water from entering from the top is quite tricky and requires some hang time to install the film, but this too can be managed if done calmly.
There are thick H-shaped films at the top and bottom, which are said to have the effect of preventing scratches on the lens and reducing friction between the films.
The claws on the Covers are easily broken, so care must be taken when attaching and detaching them.
View detail
a bit thick
[How is it used?
I bought the Grip because I needed it to replace the Handlebar on my CRF125F.
I chose it because of the rarity of SCOTT, a goggles maker, coming out with a Grip and because it comes with a Grip doughnut.
Was the one you received as per Image?
The grips are thicker and sturdier than I had imagined.
Was the installation difficult?
It was no different than a typical for Off-Road Grip.
Is it a little Large weird to make it Open Type because the end is stiff, like Pro taper's PillowGrip?
How was your experience with it?
Unfortunately, it didn't suit me.
It was hopelessly too thick to fit. My hands are a larger size than most people's, but it is still a large size. If you like thicker grips, I recommend this.
The Grip feeling in the grip is moderate. However, it may be a little aggressive, and for the first time in a long time, the skin of the hardened part at the base of my fingers peeled off.
Cushioning is high, partly due to its thickness. The palm does not peel and there is no Damage.
[Included Parts:were they on?
It comes with Grip doughnut. This is helpful because I often forget to buy them together.
[Was there anything that disappointed you?
Where it is a little too thick.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I still think Pro taper's PillowGrip is the best for Enduro.
View detail
The design is very interesting. It is a very ordinary Grip.
This is a replacement from PROTAPER.
The surface pattern is totally different, but I think PROTAPER is rather an uncomfortable category.
This one is flat on the palm and has a grid pattern on the fingers.
I think this shape is standard for off-road.
Grip end is marked with an arrow mark to indicate which direction it should be aligned.
It's a little thing, but the Design is elaborate and face White.
View detail
Goggles nowadays are
Goggles are expensive these days.
I managed to get 10,000 yen for this model.
There are three layers of sponge on the face, but I felt a little stinging from the rough surface.
Do you think it will change with use?
View detail
To prevent scratches
[How is it used?
I bought a Fury and use it to prevent scratches.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Just fasten it to the Pin for Tear off.
How was your experience with it?
Mirror Lens is going to last a long time.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
It would be nice if it was a little cheaper as it is a consumable item.
Other items that would be helpful
Don't throw it away with Course.
View detail
It's labeled Dimmable Lens.
It says "Dimmable Lens", but the color of the Lens does not change. View detail
Excellent visibility
[How is it used?
I entered the Enduro race in the rainy season.
I had a Roll-off, but it was a narrow Film width one that I bought when I was a Large student, and the visibility was poor, so I bought it because I was curious about what the latest one was like.
Was the one you received as per Image?
As per Image
But the 50mm wide Film is thicker than I thought it would be!
How was your experience with it?
In the past, I've had to remove my goggles when they fogged up or water got between the film and lens, but I was able to complete the 90 minute race without any trouble.
[Points to note]
I guess I'll have to put it all together and get it ready before Race & make sure I have enough Film left.
How did it compare to other products?
50mm wide Film is the best. It changes so much! I was very impressed.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
If you buy the Roll-off system alone, it is rather expensive, so you can save money by buying the integrated MODEL.
View detail