Reviews
Causes were easier.
I think the construction of the product is very good.
The installation is of the pinching type and requires a little setting to eliminate gaps.
The cause was easier, but there were times when it was slippery or uncomfortable on Asphalt.
View detail
It's pricey, but I like Earls Gear.
There are many cheap STANDBrackets out there, but I bought this one because it is Earls Gear.
The price is high for what it is, but with the increased stability of the Side Stand and the way it looks, I'm somewhat satisfied!
View detail
Used for diversion
Installed on NINJA Long Side Stand
Installation is no problem, but if it's not a hassle, it's better to weld it one-off tightly.
View detail
Fits: KAWASAKI W800
Heat Guard is changed to "without Heat Guard" to use OEM product.
Since the Heat Guard is a diversion of the OEM Product, this product has been cancelled and changed to without Heat Guard.
Since my W800 has a Matte black paint exhaust system, I had to arrange for a separate Heat Guard.
With the Heat Guard, the appearance is not so different from the NORMAL, so you may want to buy this one if you prefer.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION
Dress-up and a little weight reduction
Although I hooked Single Seat+LeftTandem, only Right Tandem Footpeg was still attached due to Exhaust Bracket.
I chose this one because I was looking for something rigid that I can install AKRAPOVICJMCA and has Slide adjustment.
It was a gamble to see if I could install it. (Lol) As a result, although the front and rear of the car body can be slid, the mounting position is offset to the outside of the car body, so it is not possible to attach the pons...
I made my own Bracket. It is installed. It became the form which pushes up a little.
The adjuster for the rear suspension was also fixed to the Tandem, but this bracket also needed to be modified to make the slide as large as possible.
The texture is high quality and satisfactory workmanship. If it is this finish, there seems to be a sense of existence with a sense of luxury even in Black. However, I think that Wound is easy to stick a little, and Wound a little by adjusting the installation position. It is a work with care...
View detail
Gradation is Parenthesis No.
Earls Gear itself is a sticker that can be put up anywhere because it has a good sense of parenthesis. View detail
Camping touring with full load and expecting to be effective?
I have always felt that the car was leaning too much when stopping at the side stand, so I will be able to use this system in the future Extension to reduce tilt in case of a full load for camping touring installed
I was a little concerned about hanging STAND in places with bad footing and on the shoulder of the road, but as you can see in the photos, I was able to get it to work Balance seems to be a good choice when carrying Large luggage, as it is quite low leaning
It also increases the footprint of the STAND, so it can be used in places where the ground is soft, such as camping grounds You can also expect the STAND to be less likely to be plugged in
As expected of Earls Gear, it has a high quality feel to it
However, there is a part that doesn't fit perfectly with the STAND shape, and the fixed part is slightly floating There is
It seems to be perfectly fine for use, so I'm using it as is
Also, because of the reduced leaning, you have to raise the body of the car more than usual when applying STAND This should be considered a TradeOff
The price is quite high, so I was quite hesitant to buy it, but overall I am very satisfied with the product
View detail
Fits: BMW R1250RT, BMW K1600GrandAmerica, BMW K1600B, BMW K1600GT, BMW K1600GTL, BMW R1200RT
I was puzzled by the difference from CatalogueSample.. But the result is okay!
Specifics of the Lakpositive short step on Earls Gear's website I looked at the notation ” this was it, OK, ” and ordered
It's surprisingly large to see the real thing, isn't it? and if you compare it to RT's footpeg, the height is shorter but the width is wider and There! If you think about it carefully, the footpeg in the comparison was a K1600GTL!!!
Installation requires a bit of a hang
It's easy to remove, but Spring or stiff and awkward during installation Material to install:The plastic collar tip is cut at an angle, and it can be threaded through the bolt and spring Push the collar in so that the tip of the bolt hangs on a little bit when it's time to frame the collar! This is the Point! (I can't describe it well in a sentence... sorry
When I tested the feeling of the footpeg after installation, the squishy rubber feeling of the OEM was compared with the Snap I've got a good feel for it, so it's OK somehow! As a sense of having straddled, I liked the point that the calf part stopped interfering with footpeg Still, I have not tried riding, but I think that Large is strong
The thickness of the footpeg attachment part of RT (where the bolt is passed through) seems to be thin compared with GTL I bit the SUS Washer of M8 Still, it seems to have a little room
View detail
Good design and functionality
When I purchased this product, I bought it on an applicable car and I could not install it well It fit the STANDBracket of the Motorcycle perfectly, but the Bolt is in the back I was only able to stop two of them The first one hit a STANDfootpeg weld and the top cap of the Bracket I purchased The part, per bolt was shaved After completion, it is stopped by two bolts on the back side of two bolts I am worried while running
After installation, the leaning of the Motorcycle has been eliminated
View detail
Things are nice, but …
The thickness of the STAND grounding part and the concave part of Bracket are the same Some of the clasps don't fit, and the clasp floats & hellip;
I raised and lowered the STAND a few times to see if it was loose, and then used it a couple of times and it didn't come loose LargeI think it's sturdy, but if you're worried about it, you might want to get something else
View detail
Be careful of the thickness of GlassFilm
It's not a product issue
If a thicker glass film is applied, the film will float as it is pressed at the four corners
Film will be reapplied
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
very good
However, even if I purchase Japanese Vehicle Inspection Correspondence, the certificate of Japanese Vehicle Inspection Correspondence is not enclosed.
It takes 3000 yen to get it out again
I would like you to respond even from now
View detail
Japanese Vehicle Inspection CorrespondenceSound
Because it is Japanese Vehicle Inspection Correspondence, the sound is very quiet.
I can hardly hear the sound when I run around 50?. The sound while driving is the sound of tototo. The sound of Idling is heavy and crispy but it is parasis when running..
Silencer part is big.
Exhaust pipe is a different material called Plating, Silencer is Stainless Steel, so when it gets burnt, Exhaust pipe and Silencer will be different colors.
View detail
Fits: BMW F800S, BMW F800R, BMW F800ST, BMW F800S, BMW F800R, BMW F800ST
Although the precision of the work of the product is outstanding ...
It installed in F800ST.
The accuracy of the product's fabrication is wonderful.
On the other hand, the installation Side Stand was for casting? It was decided not to put on a pin but to scrape with File. Also, when paying STAND, the contact surface collapses because it hits Exhaust pipe. (This is also the product of Tulare TEC)
View detail
Recommended for vehicles with no Assist if price is fine
Wr250x does not have Stand Assist and it has difficulty in dropping It purchased and installed a gold tool that is likely to fit at home center but it will rotate with the power of the lowering it will be removed and it will detach in terms of appearance and hesitate in terms of price Although it was finally purchased, 22, 2 Size of Pi is just like to our vehicle and I like the texture of the product well, but even if it is attached directly to the STAND it is necessary to paste Film to prevent large mortgage Considering things, I think that it is good if the Screw mountain part of the bar should be 5 mm longer, but since the part where the Screw is fitted opens a little, when Screw is tightened, the Screw mountain part of the bar is insufficiently tightened If you do not enter the full Bolt part, if you tighten too much, I feel like it will break because M6Size and tighten up to where Body does not move so that Screw will not fall off
Body is wound and fixed with Film. I'd like Manufacturer to improve this neighborhood a bit but the inconvenience that I have had is resolved. In addition, Size is the same as Handlebar 22, 2 pie. If Size is a little thin, I think that we can deal with thin inner Rubber sheet etc, but if it is a little thick Size it will not enter Mounting Hardware For reference.
View detail
Fits: BMW R1250RT, BMW K1600GrandAmerica, BMW K1600B, BMW K1600GT, BMW K1600GTL, BMW R1200RT
[a Webbike Monitor] -- -- since public evaluation was too high, it attached almost simultaneously with delivery of cars. Since it is ..., although it is hard to carry out the comparison by being pure, surely it is 足出(ed) at the time of a s
[a Webbike Monitor] --
-- since public evaluation was too high, it attached almost simultaneously with delivery of cars.
Since it is ..., although it is hard to carry out the comparison by being pure, surely it is 足出(ed) at the time of a stop, and is convenient then.
Although the pure Footrest was equivalent to the size, therefore calf, 足出し is possible for not being conscious at all with this product.
Please keep in mind that it tends to slide on a Step a little in case of rainy weather etc. since it is
, however a product made of a front Duralumin.
It is although a price should already be just cheap just for a moment if it says by force...
View detail
Although it was a good Sticker, since the Design color tone differed from the Image, it was not stuck on a Motorcycle.
Although it was a good Sticker, since the Design color tone differed from the Image, it was not stuck on a Motorcycle. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI ZX-12R, KAWASAKI ZZR1200, YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA FZS1000 Feather, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100RS
It purchased for the purpose of the dress-up up. Since it is parts without a meaning in particular, it is the self-satisfied world, but since it is a place included in eyes, it is effective for the direction which wants to get excited. However, si
It purchased for the purpose of the dress-up up.
Since it is parts without a meaning in particular, it is the self-satisfied world, but since it is a place included in eyes, it is effective for the direction which wants to get excited.
However, since two sets are needed, quantity is a little and it becomes shopping.
Although he has no complaint if cheap to a slight degree --
View detail