Reviews
Large satisfied!
I am satisfied with the good sound of the haggis, which is not as quiet as I expected, but not Large volume either. I think this is a good Japanese Vehicle Inspection Correspondence.
The installation process was easy and Gasket was available and helpful.
As for my impression after the test drive, I can hear a better haggis sound than the OEM Exhaust System, and the power is also increased.
View detail
Acceleration changed?
It looks and sounds better. Acceleration also feels better.
However, Oil Filter replacement is no longer possible due to installation error? However, oil filter replacement is no longer possible due to installation error.
It has become tougher to remove the hose on the Oil cooler. O-ring of Oil cooler may be necessary every time.
View detail
Great product
I purchased the RS from a reliable dealer after having driven it for quite a few miles. The previous owner had an AKRAPOVIC Slip-on Silencer and I personally felt the sound was too Large (especially when starting the engine).:The Normal muffler, which I believe is Stainless Steel, was also sooty, so I decided to purchase this beautiful product. The sound is not "quiet" It is not exciting to drive, but I like it very much. The engine characteristics are more obedient to the movement of the right hand, and the torque around 2,000 rpm has been fattened up, making it very easy to control. I also feel that the vibration on the grips has been reduced. It was like a puzzle to remove the coupler from the mount. The O2 Sensor requires a 22mm Glasses Wrench to remove the Sensor. I also installed HeelTEC's CanSera on the coupler that connects to the exhaust servo motor. Without this Can Seraer, the exhaust servo motor must be left on the body. The exhaust gasket seems to be usable as it is (13mm Glasses Wrench is used for the exhaust system bolt), but the exhaust pipe before the silencer needs to be assembled properly in order to install the silencer neatly. Finally, the spring is installed. As an amateur, I had muscle pains for three days. The performance and appearance of the exhaust system is excellent and well worth the price. I wish it had been included in my new car. It is not cheap, but it will make your motorcycle different (my opinion). View detail
Fits: KAWASAKI MEGURO K3, KAWASAKI W800 CAFE, KAWASAKI W800 STREET, KAWASAKI W800
Sounds good.
When installing the silencer bracket on the Right Side, the screws did not go in straight and I had to screw them in with a bad feeling.
The exhaust pipe turns bright Red when warming up, is this like this? It looks like it is about to catch fire.
View detail
Very Nice!
Ordered the Wyvern Classic 4 Exhaust. Items were very well packaged for the trip to the US. Pipes are beautiful and the chrome looks excellent, No quality issues coud be found and I spent an hour going over every square inch. If there could be an improvement, I wish the were double layered at the headpipes, like Honda used to make them, to prevent bluing from the hot exhaust. I have not installed them yet and maybe my concerns will be unfounded after thay are installed. Overall so far, great looking pipes! View detail
Fits: BMW R1200GS Adventure, BMW R1200GS
Wyvern Real Spec
Torque up at low rpm, which is immediately apparent after riding
The sound quality is mellow, and it feels quieter than NORMAL and does not cause sound fatigue even over long distances.
But it's a good price, so it takes courage.
View detail
Very good chrome !
I received the package in only a few days. I was astonished how good the quality of the exhaust is, the chrome is perfect in all areas. The exhaust was very well packed and came with mounting material and documents View detail
Fits: KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Beautiful browning
First time installing Titaniumium full exhaust!
The baking color is so beautiful, I could look at it forever!
Sound is quiet because of Japanese Government Approved Exhaust System, but you can hear it!
I would like to replace Silencer only at the exit sometime soon!
View detail
Fits: HONDA Rebel 1100, HONDA Rebel500, HONDA Rebel250, HONDA Rebel300, HONDA Rebel300
MTMODEL×OEMWIN deCowl with high installation difficulty
After much research, I found out that the difficulty level of installing a Handlebar Riser increases dramatically just because it is an MTMODEL Rebel 1100, and it has an OEM cowl, which is even more difficult to install.
As mentioned earlier, the MTMODEL has a patched Clutch Wire, so it is necessary to change the handling to a good one, which increases the difficulty to a degree that you cannot imagine when watching a video of a quick Youtube installation repo with a DCTMODEL.
In addition, in the case of my Motorcycle, because it was equipped with an OEMWIN de Cowl, if this is attached, the Cowl is removed and converted to an Exclusive Bracket, and the difficulty of installing ・・・・ and the Handlebar Riser itself seems to increase dramatically, so I recommend that those who do it on their own are familiar with it and are prepared to install it. Therefore, it is recommended that those who do it by themselves should be prepared to install the Handlebar Riser.
I don't see many repos with this Handlebar Riser in combination with MT×OEMCowl.............................good luck to those who do it by themselves.
Also, the Motorcycle store had to cut out a part of the plastic cover where the clutch wire and other wires are located. If there was no OEM cowl, it might have been possible to handle the wires by just routing the wires, but it seems that the wires could not reach the cowl if it was also attached.
As for the conversion after installation, the conversion was that it did not move backward as much as expected. However, it is still overwhelmingly Quantity in the backward and upward direction.:It is true that the bike is set back, and I can now ride with a hunched posture like when I ride a Harley instead of the leaning forward posture I used to have with my arms pinned and stretched. (However, due to my short arms, my arms remain the same as Pin and taut.) 。
It is pricey, but it is effective, so if you can, you may want to put it on about as soon as you take delivery of the car.
View detail
Fits: HONDA Rebel 1100, HONDA Rebel1100DCT
Required if with OEMCowl
Purchased this for the installation of a Handlebar Riser on an Earls Gear Rebel 1100. I purchased it and requested to have it installed directly at WebikePit in.
It seemed that it was still necessary, and we were able to attach it to Beauty.
The difficulty of installing the Handlebar Riser itself seems to increase dramatically when the OEMCowl is attached, so we recommend that those who do it on their own be prepared to do so if they are familiar with it.
I don't see many repos with this Handlebar Riser in combination with MT×OEMCowl...
View detail
Increased stability when parking
I purchased this to help cause my heavyweight GSX1300R HAYABUSA. It looks and feels good, and the bottom is cut at an angle for stability. Of course, there is no interference with the exhaust system. I thought it was a good stand high bracket. View detail
Fits: HONDA CB1300SB, HONDA CB1300SF
I'm satisfied
At the time of purchase, the product arrived half a month earlier than advertised.
The Instruction Manual for installation was also easy to understand and super simple.
At Idling, it seems to have a little more bass. At high RPM, I cannot judge how much different it is.
My family did not seem to understand that I had changed the exhaust system.
I wonder if it is a mood thing, or if I feel a little better Response.
View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
Easy to get up.
AdventureMotorcycle tends to have deep Side Stand angles.
The Africa Twin is a heavy vehicle, and depending on where it is parked, it may take some force to raise it up.
This product raises the bottom of the STAND so that the relative STAND angle is softened and just easier to handle.
It also slightly increases the footprint of the STAND and provides a sense of security.
Great buy, a Commendation product!
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1200 R
Full Exhaust System
I had only seen it in images, but I was satisfied when I installed it.
The color and the sound are good for Japanese Vehicle Inspection Correspondence, and it is a satisfactory Exhaust System.
View detail
Fits: BMW R1200GS Rally Premium Sport, BMW R1200GS-ADV, BMW R1200GS-ADV Premium Line, BMW R1250GS HP Premium Sports, BMW R1250GS-ADV HP Premium Line, BMW R1250GS-ADV Premium Line
This will keep you from getting stuck.
This is a standard product for BMW and the effect is outstanding. The quality is good and satisfactory. View detail
Solidly built and secure.
[How is it used?
Expand the footprint of the Side Stand to a larger area.
Was the one you received as per Image?
Street Image
Was the installation difficult?
If the Center Stand is set up, installation is completed with 4 Bolts.
How was your experience with it?
The side stand slightly raises the angle of the car body when parked, making it easier to raise the car body after boarding.
The installation area will be increased, so it will be possible to park stably even if the ground is somewhat soft.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I think the price is just a little high.
The construction is solid, so I can say it's worth the price in a good way.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R
Large I'm satisfied.
The OEM sound was good, but was replaced for appearance and weight savings.
The dry sound of the Titaniumium full exhaust is fantastic. Especially, the volume after 8000 rpm is numbing.
However, if you keep the RPMs high all the time, your ears will get tired...
Also, pull to high rpm and then SHIFT UP to get After Fire.
Installation accuracy was not a problem, and the installation was completed in about 2 hours by an amateur.
View detail
笙ェ appearance and sound are [ 笙ェ ] the highest
笙ェ appearance and sound are [ 笙ェ ] the highest View detail
笙ェ appearance and sound are [ 笙ェ ] the highest
笙ェ appearance and sound are [ 笙ェ ] the highest View detail
Optimize Motorcycle's Handlebar position!
I purchased this product because the Handlebar position on the Motorcycle was too far away.
After installing the handlebar, the driving operation became more comfortable due to its proximity to the handlebar.
I am satisfied with the quality and appearance of the Large change.
View detail