Reviews
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
Cool Product!
After installing it really makes less effort when lifting the bike from the side even with full tank. It makes the bike feels lighters by not leaning so much when parked on side stand. Compatiable with Honda OEM Main Stand no issues of having two installed together. View detail
Necessities
This is a must-have because the side stand is not JapanSpec. The stability and quality of the stand is excellent. It is easier to raise the car body than with the Large Stand. View detail
I feel safe.
I am very satisfied with the quality of the Aluminum Cut-out and the angle of inclination of the Motorcycle, which I was concerned about, has been corrected. The area of the road surface is clearly larger than that of the OEM, so I feel much safer when I stop the vehicle. View detail
Fits: BMW R nineT, BMW R nineT Pure, BMW R nineT Racer
I'm satisfied
RnineT UrbanGS was lowered and converted to Short Stand. It took about two weeks to receive the product, but it came in one week. I have heard some people say that the Large stand has a thick block and looks ugly, but I don't think that's true. I am glad I bought it even if it is expensive. I am satisfied with it. View detail
Improved stability when parking
After taking delivery of the car, I was concerned about the small footprint of the STAND, so I immediately purchased and installed it. It has a good texture and high rigidity. View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
Almost Essential Parts
Standard Spec. is too large to cause the body to lean too much when STAND is applied.
It is much easier to get rid of clogs here.
The quality of the product is good, and it can be installed immediately with only a screw lock and simple tools, so it is a good idea to have these available when purchasing the car body.
View detail
Increased stability when parking
I purchased this to help cause my heavyweight GSX1300R HAYABUSA. It looks and feels good, and the bottom is cut at an angle for stability. Of course, there is no interference with the exhaust system. I thought it was a good stand high bracket. View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
Easy to get up.
AdventureMotorcycle tends to have deep Side Stand angles.
The Africa Twin is a heavy vehicle, and depending on where it is parked, it may take some force to raise it up.
This product raises the bottom of the STAND so that the relative STAND angle is softened and just easier to handle.
It also slightly increases the footprint of the STAND and provides a sense of security.
Great buy, a Commendation product!
View detail
Fits: BMW R1200GS Rally Premium Sport, BMW R1200GS-ADV, BMW R1200GS-ADV Premium Line, BMW R1250GS HP Premium Sports, BMW R1250GS-ADV HP Premium Line, BMW R1250GS-ADV Premium Line
This will keep you from getting stuck.
This is a standard product for BMW and the effect is outstanding. The quality is good and satisfactory. View detail
Solidly built and secure.
[How is it used?
Expand the footprint of the Side Stand to a larger area.
Was the one you received as per Image?
Street Image
Was the installation difficult?
If the Center Stand is set up, installation is completed with 4 Bolts.
How was your experience with it?
The side stand slightly raises the angle of the car body when parked, making it easier to raise the car body after boarding.
The installation area will be increased, so it will be possible to park stably even if the ground is somewhat soft.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I think the price is just a little high.
The construction is solid, so I can say it's worth the price in a good way.
View detail
Purchased to improve body lean of my Racer 900GT
The OEM Side Stand for the Racer 900GT tilts too much, so when parked on an incline to the left, it tilts to the point where it might topple over.
Installation is easy, and after installation, it can be parked on a flat surface or on a slope to the Left without anxiety. However, it is better to consider where to park the car because it stands too much on the right inclined place.
This product has a height of the product itself and the bottom part is cut at an angle, considering when the product is parked, so it is stable on the ground. I had previously purchased a cheap Chinese one, but it was not thick enough and the bottom was flat, so the ground was unstable.
Japanese manufacturers are well thought out and the price is understandable.
View detail
Fits: HONDA Rebel1100DCT, HONDA Rebel 1100, HONDA Rebel1100DCT, HONDA Rebel 1100
Good fit, enough strength for my needs.
I installed it while supporting the car body with my body.
If you have the strength, you can install it without any problem.
After installation, the car body wakes up more than I expected, but so far I haven't had to worry about it falling over even though I live in a windy area.
As for stability on rough terrain, I have plans to go camping in February 2022, so I will test it there.
Four Hexagon bolts are used to secure the STAND installation.
It does not close completely and floats slightly. (See photo)
However, since the load is only applied from the top to the bottom, the direction in which the bolt breaks (front to back of the vehicle, quantity:Pair (for Left and Right) I think there is no need to worry about it as long as you don't apply force to it (in the direction of
View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
I feel so much better.
Before I put it on, it was very heavy to cause, but after I put it on, it became very easy.
I wish I had put it on sooner.
View detail
Pricey but good stuff.
The F900XR is a Germany car and the lane is reversed, so the inclination of the road is also opposite to Japan. Therefore, the inclination is hard, and the fear comes out when parking. If I get used to it, it will be good, but I buy it for the sense of security in the case of emergency and usually. I used the one made in China which is not so thick in the first stage, but the effect is different by far. Because the inclination at the time of parking changes to the same Level as a domestic car, a sense of security is obtained. View detail
You should definitely put it on!
I had heard that the inclination of Side Stand of f900xr is Large threshold, but
As soon as I started riding it, I knew it was true and bought it.
It's just a little Convenience parking lot.
There's a lot of places where it's leaning, except for the parking strip on the mountain road where I stopped to take a picture.
There are a lot of situations where I feel like if I didn't have this, it would have been hard.
I'm very happy with these parts.
Footing, etc. was of course unaffected, and I was able to install it immediately the night it arrived.
I put a screw lock on it just in case and drove 1200km.
View detail
The tilt is improved and safe.
The motorcycle side stand in Europe is too short for Japan, so I installed this height bracket.
It is well made and has good mounting accuracy, and I don't have to worry about securing it with the Side Stand.
View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
Recommended for people with delicate feet.
Purchased for the AdventureSports type. The purpose is to extend the length of STAND. The purpose of increasing the ground clearance is secondary.
My feet are in the Normal position and the sole of my feet touches the ground. 2cm lower in the low position and the heel floats.
I ride the Seat with my feet on the footpeg with the Side Stand on. This is because I'm worried that if I pay the Side Stand before I get on the bike, I'll knock the motorcycle over to the Right Side. In the normal position, there are often places where the terrain leans toward the Left Side or the Left Side of the road is sloping. It was. The legs didn't feel right, and because the center of gravity of the motorcycle is so high, it was difficult to wake it up. I tried to raise the bike by shifting the center of gravity. I bought this product because I can't do it every time. 19mm STAND is longer, so I can wake up without having to do it again. The price is high, but I'm happy with it. The grounding area of other products extends, but I didn't think there were any products that made the STAND length longer.
I'm 5'9" tall. Installation is easy. The picture is the box it came in. If you can help me.
View detail
Fits: BMW R nineT, BMW R nineT Pure, BMW R nineT Racer
Although it can not be seen ? ? ?
There may be individual differences, but due to the fact that the accuracy is too tight, it became a slightly tight fitting.
Although I feel that I feel pretty looking is pretty bad, but it became easy to stop easily anyway.
Moreover, I feel that it became easier to kick even when putting out the STAND again.
View detail
I am in the same Manufacturer as Exhaust System and I like it
Since there is no particular plan to run Dirt or forest road in particular, it is necessary to increase the area of ??STAND
Although it was not, I was impulse buy because it was the same Manufacturer as Wai BurnExhaust System.
View detail
geta
I selected it because the tilt is Large and the contact area is Small.
Because the thickness is Large, it is nice.
For other Manufacturers, the area becomes bigger,
I did not mention the height, I was anxious.
This is described properly, so you can rest assured.
View detail