Reviews
Fits: HONDA Rebel250, HONDA Rebel500, HONDA Rebel300, HONDA Rebel300
Increased stability
Narrower Side Stand,
Purchased because it was unstable depending on where I parked.
It is thicker and more stable.
Installation was easy, but a Hexagonal Wrench is required.
The size of the Hexagonal Wrench was not mentioned in the product instructions, so that is a point of dissatisfaction.
View detail
Fits: BMW R1250GS, BMW R1250GS-ADV, BMW R1250GS HP, BMW R1250GS-ADV HP, BMW R1200GS, BMW R1200GS-ADV, BMW R1200GS Rally
There is a reason for the price!
It's pricey, but it seems to use a very strong material.
I moved the Motorcycle a little with the Side Stand on, and the Concrete on the Garage was shaved. Of course, installation was easy.
View detail
Fits: BMW R1200GS, BMW R1200GS Premium Line, BMW R1200GS Rally Premium Line, BMW R1250GS HP Premium Line, BMW R1250GS Premium Line
If you don't mind the price...
I bought it to bulk up the height rather than the width of the seat.
The side stand makes it much better to lean when stopping.
I am satisfied with the quality of the product. Installation is easy with only 3 Bolts.
The drawback is its price, which I knew before I bought it.
Opinions differ as to whether one can afford to pay about 15,000 yen for Side Stand clogs.
View detail
Fits: BMW R nineT, BMW R nineT Pure, BMW R nineT Scrambler, BMW R nineT Urban G/S, BMW R nineT Pure, BMW R nineT Scrambler, BMW R nineT Urban G/S
It is effective. However, there are some things to watch out for.
The unnatural collapse when the Side Stand is applied has been eliminated, and it now looks natural.
The installation itself is easy, but there is a Point to attach it properly.
The Side Stand must be completely floated to properly align the floor ground contact surface of the product and STAND.
It is better to use a Center Stand or have someone support the Motorcycle.
Screws are too short, so screw lock agent is necessary.
The product is a heavy lump of Gold; depending on where you place the Motorcycle, it may scratch the floor.
View detail
Side Stand Bracket
Note the order of screw tightening. Tighten the two screws on the Motorcycle side first, then the outer Quantity:Tightening the 2pcs will attach without gaps. View detail
Fits: BMW R nineT, BMW R nineT Pure, BMW R nineT Scrambler, BMW R nineT Urban G/S, BMW R nineT Pure, BMW R nineT Scrambler, BMW R nineT Urban G/S
Recommended by Dealer.
RnineT is made in Germany.
The side stand is shorter than that of Japanese motorcycles.
When stopping, it is a little easier to maneuver if you put on the geta because it collapses deeply.
I installed it when I took delivery of the car.
It looks a little bulky, but it is every time when the car is parked.
It is about 20mm, but may be a little convenient in a humble way.
You may also be able to find a SMART Side Stand for the 2021 RnineT.
(I don't know what year it is, but there is a SMART Side Stand on Net, not sure if it will fit a '21 or not, so I haven't gotten around to it …)
If anyone can help me understand, I would be glad to know.
View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
Required for〈s〉Spec.
There are two types of center stands, one for the normal model and the other for the "s" model, but the "s" model tilts considerably.
Appropriate by this Parts? (I could stand up more). The position of the camera could be corrected.
The plate is held in place by four screws, but a screw lock agent was used in case of unexpected failure.
View detail
Just the right amount of tilt.
In Japan, we have Left Side traffic, so the leaning is more large when we stop. Especially, when I stopped on the shoulder of the road while touring with a full load of luggage, I felt uneasy because it became a considerable lean. At such a time, I found this product and bought it. It is easy to install with 4 bolts.
The product is of high quality, high texture and chunky weight, and the tilt is just right, this eliminates any concerns. This product is more effective in loosening up the incline of the Motorcycle rather than increasing the footprint of the STAND. I haven't tried it on soft or sandy soil, so I don't know how effective it would be, but it would be a good idea to put some hard wood chips or large stones underneath just in case.
The price was high, but when I got the actual product, I was satisfied with the quality, and I am glad I bought it.
View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
It's easy to trigger.
The STAND on the Africa Twin is short and even if the road surface is level, it seems to lean quite a bit. I am worried that the STAND is not coming out until you get used to it. After installing this product, the tilt is looser and easier to cause. The ground is two birds with one stone with the feeling of security in the ground where the ground is loose. However, it is necessary to pay attention to the inclination of the stopping position because the amount that has happened, the fall risk during stopping goes up.
Installation is easy, but I think that it loosens by vibration if Screw Lock is not applied to the fixed Bolt. It is another product, but it came loose and lost the Bolt before.
View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
Safe FOR JAPAN MODEL products
It was annoying to cause a large leaning, large body, but Side The Stand is longer and easier to use The Stand is longer and easier to use It's just a good fit with no discomfort at all It's a bit pricey, but it's Earls Gear, so I have to give it this rating View detail
I love it, it's gothic and sturdy
I installed it on a 2020 GOLD WING
Installation is easy with Hexagonal Wrench But you need Center Stand to install it
With the OEM product, the grounding surface is small, so you can rest assured that this is a good choice
View detail
Fits: BMW R1200GS, BMW R1200GS Premium Line, BMW R1200GS Rally Premium Line, BMW R1250GS HP Premium Line, BMW R1250GS Premium Line
I think it's a little too expensive
There are a lot of things that can increase the ground clearance of a STAND, but there aren't a lot of options that can increase the height of the STAND So I chose this one with an eye to price
The price is high because it's well built and high quality, but it's simply a Side Stand I'm not sure if I need this much for something that is just to bulk up the It's pretty heavy
You could make it a little more Reduced in Cost and built Reasonable User friendly
View detail
Fits: BMW R nineT scrambler, BMW R nineT Urban G/S
Truly Quality
As expected, Earls Gear
It was easy to install with excellent machining precision
The quality of Anodized is also good and beautiful Parts.
It is easier to raise Motorcycle by suppressing the inclination when STAND is used
As the ground plane also becomes Large, the stability on the unpaved road will be much better.
View detail
[Webike Monitor] It attached to K1600GT. -- causing -- since it becomes easy and a crawler bearing area also increases, sense of security increases at the time of parking by a weight vehicle. Since it is the structure in which the products
[Webike Monitor] It attached to
K1600GT.
-- causing -- since it becomes easy and a crawler bearing area also increases, sense of security increases at the time of parking by a weight vehicle.
Since it is the structure in which the
products also became brave, it is safe.
The price of a difficulty is merely high.
View detail
[Webike Monitor] It attached to K1600GT. Although it is only 9-mm Up, it pulls and derrick up becomes easy. However, since K1600 does not lean so much from the beginning, it stands for a while and it feels it for feeling. At the time of S
[Webike Monitor] It attached to
K1600GT.
Although it is only 9-mm Up, it pulls and derrick up becomes easy.
However, since K1600 does not lean so much from the beginning, it stands for a while and it feels it for feeling.
At the time of STAND ON, cautions consider by necessity at the place.
View detail
[Webike Monitor] Although annoyed by the giant of 1600GTs after delivery of cars, after attaching this Bracket, the sense of stability at the time of parking increased to it to which the influence derrick up of the car body after parking beca
[Webike Monitor] Although annoyed by the giant of 1600GTs after
delivery of cars, after attaching this Bracket, the sense of stability at the time of parking increased to it to which the influence derrick up of the car body after
parking became very easy.
View detail
[Webbike Monitor] Since it was a huge form Motorcycle over 350kg, it pulled, and the preparations book product was comfortably purchased for derrick up. They are Earls-Gear products truly. Structure こみ and the high grade feeling covering d
[Webbike Monitor] Since it was a huge form Motorcycle over
350kg, it pulled, and the preparations book product was comfortably purchased for derrick up.
They are Earls-Gear products truly.
Structure こみ and the high grade feeling covering details are true.
since the car-body inclination at the time of
stop is suppressed -- expectation -- causing -- it became markedly easy.
Since a setting face product increases above all, sense of security is different also at the time of parking to the Asphalt, and the ground / gravel ground surface which became soft in summer.
Although it fixes to
attachment with six machine screws, it increases occasionally and a bundle is required.
View detail
Fits: BMW K1300S, BMW K1300R, BMW K1200S, BMW K1200R, BMW K1300S, BMW K1300R, BMW K1200S, BMW K1200R
Since the structure of attachment is good, it is attached exactly. -- also causing -- it became easy. Although it was HP Undercowl wearing vehicle, and not interfered at the time of storage, since the STAND was bounded and it contact
Since the structure of attachment is good, it is attached exactly.
-- also causing -- it became easy.
Although it was
HP Undercowl wearing vehicle, and not interfered at the time of storage, since the STAND was bounded and it contacted delicately with vigor at the time of a raising, the protection sheet was stretched by prevention of a Wound, ワレ, etc. just to make sure.
Although it is goods with easy
attachment, I thought whether the description etc. which indicated the details of goods could be attached.
View detail
Although it often hears that there is no connection and the Step of MONSTER is very hard to use, when it actually uses, it of it is in usage ... Although there is also a Side stands assist bar for MONSTER, it is somehow considered as the extravag
Although it often hears that there is no connection and the Step of MONSTER is very hard to use, when it actually uses, it of it is in usage ...
Although there is also a Side stands assist bar for
MONSTER, it is somehow considered as the extravagant and is not my liking.
-- a place -- the Side stands assist bar for R1200GS of r's gear -- a Rubber -- 噛ます -- it is discovery at someone's Impressions about the ability to use by things.
It prepares and equips with the Rubber of 3-mm thickness instantly.
At the time of the lower hit of the Spring of a STAND, and storage, it comes out of the
place out of the blue between a Step and a Shift pedal.
We can equip a Simple shapely and it is recommended.
View detail
Although it is an object for BMW, it purchases to DUCATI Monster. The form of an assist bar matches the stand and is touch good. On the occasion of attachment, since the DUCATI was thinner, the path of side stands attached and used the clamp part
Although it is an object for BMW, it purchases to DUCATI Monster.
The form of an assist bar matches the stand and is touch good.
On the occasion of attachment, since the DUCATI was thinner, the path of side stands attached and used the clamp part on both sides of the rubber board.
With [ since it is not just going to apply load / use ] no problem.
Or [ becoming a measure against slack by vibration ]?
View detail