Reviews
I am in the same Manufacturer as Exhaust System and I like it
Since there is no particular plan to run Dirt or forest road in particular, it is necessary to increase the area of ??STAND
Although it was not, I was impulse buy because it was the same Manufacturer as Wai BurnExhaust System.
View detail
Fits: BMW F800S, BMW F800R, BMW F800ST, BMW F800S, BMW F800R, BMW F800ST
Although the precision of the work of the product is outstanding ...
It installed in F800ST.
The accuracy of the product's fabrication is wonderful.
On the other hand, the installation Side Stand was for casting? It was decided not to put on a pin but to scrape with File. Also, when paying STAND, the contact surface collapses because it hits Exhaust pipe. (This is also the product of Tulare TEC)
View detail
Recommended for vehicles with no Assist if price is fine
Wr250x does not have Stand Assist and it has difficulty in dropping It purchased and installed a gold tool that is likely to fit at home center but it will rotate with the power of the lowering it will be removed and it will detach in terms of appearance and hesitate in terms of price Although it was finally purchased, 22, 2 Size of Pi is just like to our vehicle and I like the texture of the product well, but even if it is attached directly to the STAND it is necessary to paste Film to prevent large mortgage Considering things, I think that it is good if the Screw mountain part of the bar should be 5 mm longer, but since the part where the Screw is fitted opens a little, when Screw is tightened, the Screw mountain part of the bar is insufficiently tightened If you do not enter the full Bolt part, if you tighten too much, I feel like it will break because M6Size and tighten up to where Body does not move so that Screw will not fall off
Body is wound and fixed with Film. I'd like Manufacturer to improve this neighborhood a bit but the inconvenience that I have had is resolved. In addition, Size is the same as Handlebar 22, 2 pie. If Size is a little thin, I think that we can deal with thin inner Rubber sheet etc, but if it is a little thick Size it will not enter Mounting Hardware For reference.
View detail
geta
I selected it because the tilt is Large and the contact area is Small.
Because the thickness is Large, it is nice.
For other Manufacturers, the area becomes bigger,
I did not mention the height, I was anxious.
This is described properly, so you can rest assured.
View detail
There is no Assist in the Side stands of Motorcycle characteristic ? of a Yamaha. If BMW has an Assist when consulting with YSP. What the STAND diameter of WR is [ thing ] OK if it asks r's gear instantly. The kind and a function are sati
There is no Assist in the Side stands of Motorcycle characteristic ? of a Yamaha.
If BMW has an Assist when consulting with
YSP.
What the STAND diameter
of WR is [ thing ] OK if it asks r's gear instantly.
The
kind and a function are satisfactory.
View detail
[Webike Monitor] It attached to K1600GT. -- causing -- since it becomes easy and a crawler bearing area also increases, sense of security increases at the time of parking by a weight vehicle. Since it is the structure in which the products
[Webike Monitor] It attached to
K1600GT.
-- causing -- since it becomes easy and a crawler bearing area also increases, sense of security increases at the time of parking by a weight vehicle.
Since it is the structure in which the
products also became brave, it is safe.
The price of a difficulty is merely high.
View detail
[Webike Monitor] It attached to K1600GT. Although it is only 9-mm Up, it pulls and derrick up becomes easy. However, since K1600 does not lean so much from the beginning, it stands for a while and it feels it for feeling. At the time of S
[Webike Monitor] It attached to
K1600GT.
Although it is only 9-mm Up, it pulls and derrick up becomes easy.
However, since K1600 does not lean so much from the beginning, it stands for a while and it feels it for feeling.
At the time of STAND ON, cautions consider by necessity at the place.
View detail
[Webike Monitor] Although annoyed by the giant of 1600GTs after delivery of cars, after attaching this Bracket, the sense of stability at the time of parking increased to it to which the influence derrick up of the car body after parking beca
[Webike Monitor] Although annoyed by the giant of 1600GTs after
delivery of cars, after attaching this Bracket, the sense of stability at the time of parking increased to it to which the influence derrick up of the car body after
parking became very easy.
View detail
[Webbike Monitor] Since it was a huge form Motorcycle over 350kg, it pulled, and the preparations book product was comfortably purchased for derrick up. They are Earls-Gear products truly. Structure こみ and the high grade feeling covering d
[Webbike Monitor] Since it was a huge form Motorcycle over
350kg, it pulled, and the preparations book product was comfortably purchased for derrick up.
They are Earls-Gear products truly.
Structure こみ and the high grade feeling covering details are true.
since the car-body inclination at the time of
stop is suppressed -- expectation -- causing -- it became markedly easy.
Since a setting face product increases above all, sense of security is different also at the time of parking to the Asphalt, and the ground / gravel ground surface which became soft in summer.
Although it fixes to
attachment with six machine screws, it increases occasionally and a bundle is required.
View detail
Fits: BMW K1300S, BMW K1300R, BMW K1200S, BMW K1200R, BMW K1300S, BMW K1300R, BMW K1200S, BMW K1200R
Since the structure of attachment is good, it is attached exactly. -- also causing -- it became easy. Although it was HP Undercowl wearing vehicle, and not interfered at the time of storage, since the STAND was bounded and it contact
Since the structure of attachment is good, it is attached exactly.
-- also causing -- it became easy.
Although it was
HP Undercowl wearing vehicle, and not interfered at the time of storage, since the STAND was bounded and it contacted delicately with vigor at the time of a raising, the protection sheet was stretched by prevention of a Wound, ワレ, etc. just to make sure.
Although it is goods with easy
attachment, I thought whether the description etc. which indicated the details of goods could be attached.
View detail
Although it often hears that there is no connection and the Step of MONSTER is very hard to use, when it actually uses, it of it is in usage ... Although there is also a Side stands assist bar for MONSTER, it is somehow considered as the extravag
Although it often hears that there is no connection and the Step of MONSTER is very hard to use, when it actually uses, it of it is in usage ...
Although there is also a Side stands assist bar for
MONSTER, it is somehow considered as the extravagant and is not my liking.
-- a place -- the Side stands assist bar for R1200GS of r's gear -- a Rubber -- 噛ます -- it is discovery at someone's Impressions about the ability to use by things.
It prepares and equips with the Rubber of 3-mm thickness instantly.
At the time of the lower hit of the Spring of a STAND, and storage, it comes out of the
place out of the blue between a Step and a Shift pedal.
We can equip a Simple shapely and it is recommended.
View detail
Although it is an object for BMW, it purchases to DUCATI Monster. The form of an assist bar matches the stand and is touch good. On the occasion of attachment, since the DUCATI was thinner, the path of side stands attached and used the clamp part
Although it is an object for BMW, it purchases to DUCATI Monster.
The form of an assist bar matches the stand and is touch good.
On the occasion of attachment, since the DUCATI was thinner, the path of side stands attached and used the clamp part on both sides of the rubber board.
With [ since it is not just going to apply load / use ] no problem.
Or [ becoming a measure against slack by vibration ]?
View detail