Reviews
Fits: BMW R1200GS, BMW R1200GS Adventure, BMW R1250GS, BMW R1200GS, BMW R1200GS, BMW R1250GS Adventure, BMW R1200GS Adventure
Riding position is now easier.
I used to feel like my arms were stretched all the way out, but after putting this on, I have more room in my arms and the riding position is easier.
I am 167 cm tall.
View detail
Fits: BMW R nineT, BMW R nineT Scrambler, BMW R nineT Pure, BMW R nineT Urban GS, BMW R nineT/5
My arms feel better.
I changed it to NORMAL because with NORMAL, my Right hand gets numb and tired. I chose Earls Gear because of its reliability among various products. I used the same product for R-1200GSA in the past. I did the replacement by myself. It was a good decision because it made driving easier and less tiring. View detail
Fits: BMW R nineT, BMW R nineT Scrambler, BMW R nineT Pure, BMW R nineT Urban GS, BMW R nineT/5
Position is now easier.
The work was done by a Dealer. Work was performed at Dealer.
Until now, I have been using Wonderlich's Spacer to raise it by 20mm,
After changing to this product, positioning became easier.
I have also installed a pull back riser made by r's gear on my previous R1200GS.
I trust the quality of the product because it is made by r's gear.
View detail
Fits: HONDA Rebel 1100, HONDA Rebel500, HONDA Rebel250, HONDA Rebel300, HONDA Rebel300
MTMODEL×OEMWIN deCowl with high installation difficulty
After much research, I found out that the difficulty level of installing a Handlebar Riser increases dramatically just because it is an MTMODEL Rebel 1100, and it has an OEM cowl, which is even more difficult to install.
As mentioned earlier, the MTMODEL has a patched Clutch Wire, so it is necessary to change the handling to a good one, which increases the difficulty to a degree that you cannot imagine when watching a video of a quick Youtube installation repo with a DCTMODEL.
In addition, in the case of my Motorcycle, because it was equipped with an OEMWIN de Cowl, if this is attached, the Cowl is removed and converted to an Exclusive Bracket, and the difficulty of installing ・・・・ and the Handlebar Riser itself seems to increase dramatically, so I recommend that those who do it on their own are familiar with it and are prepared to install it. Therefore, it is recommended that those who do it by themselves should be prepared to install the Handlebar Riser.
I don't see many repos with this Handlebar Riser in combination with MT×OEMCowl.............................good luck to those who do it by themselves.
Also, the Motorcycle store had to cut out a part of the plastic cover where the clutch wire and other wires are located. If there was no OEM cowl, it might have been possible to handle the wires by just routing the wires, but it seems that the wires could not reach the cowl if it was also attached.
As for the conversion after installation, the conversion was that it did not move backward as much as expected. However, it is still overwhelmingly Quantity in the backward and upward direction.:It is true that the bike is set back, and I can now ride with a hunched posture like when I ride a Harley instead of the leaning forward posture I used to have with my arms pinned and stretched. (However, due to my short arms, my arms remain the same as Pin and taut.) 。
It is pricey, but it is effective, so if you can, you may want to put it on about as soon as you take delivery of the car.
View detail
Optimize Motorcycle's Handlebar position!
I purchased this product because the Handlebar position on the Motorcycle was too far away.
After installing the handlebar, the driving operation became more comfortable due to its proximity to the handlebar.
I am satisfied with the quality and appearance of the Large change.
View detail
Update to optimal position.
The best fit like OEMParts, the position is comfortable and the maneuverability has been improved. View detail
Riding Position has improved.
Height 165!
I put this on …ツ-Ring and the pass is good!
View detail
To improve the Riding position
I'm a small guy, so I felt the Handlebar was too far away. I'm a small guy, so the Handlebar seemed a bit far away. It was a good choice for me because it is easy to work with and I can use other brackets and wires as they are. View detail
Perfect for Touring
I have a standard build of 170cm/67kg.
I installed it on my R1200RS.
Although the Normal position was easy to put to sleep, I was suffering from stiff shoulders and back fatigue after long rides.
(This is partly because I usually drive an Up Position Off car or a NAKED)
After I put this Bracket on, I am free from such fatigue. I wish I had bought it earlier.
This is a recommendation for those who use R1200RS as a tourer.
However, Normal position might be better for GunGun attack on the pass.
Easy to install by one person as long as you have the tools.
Required Tools
Torque→Navigation Holder detachment
・13mmRatchet
Torque wrench (You don't need it, but it's better to have it.)
View detail
Fits: BMW R1200GS, BMW R1200GS Adventure, BMW R1250GS, BMW R1200GS, BMW R1200GS, BMW R1250GS Adventure, BMW R1200GS Adventure
An easy positive to buy.
I bought this product because the price is very high and I had a lot of hesitation. Also, the texture of the product is great and I'm glad I bought it. View detail
I am satisfied..
Product is also high texture and easy to install. The inclination when using Side Stand was also reduced, making it easier to cause bridging. It is slightly expensive, but it is a good item. View detail
A little tall but nice item
It installed in R1200 RS. The upper body grew and the arm touched up, Handlebar felt far away. Seat also changed to High seat, but the problem solved in one product with this product It is good to be able to load Seat properly. View detail
Need for average Japanese (?)
After purchase, I went to 300 km Touring soon, but my hand gradually got tired and I was driving one hand many times on the way. The previous car R1100RS was able to adjust the Handlebar position, but this time I had not seen anything at all what I was watching Net I found Handlebar Bracket with Earls Gear and H & B.
At first, since H & B was also cheap in price, I ordered imported goods delivery date as one month, so I canceled and ordered Earls Gear. This was available in two days. I installed it immediately, but I was able to install without any change as I expected.
I am satisfied without appearance discomfort. Although I ran 500KM at a stretch, I was satisfied with Large change even if I ran with a good result.
View detail