Reviews
Fits: YAMAHA XT250X, YAMAHA serow250 [serow]., YAMAHA XG250 TRICKER [Tricker].
No RSV issues, as expected
19’ I installed it in DG31J
Bolt position and exhaust pipeClamp were easily installed
The sound was not bombastic, but with a good amount of bass (As desired.)
Compared to the NORMAL, it is now easier to run because the drainage is better
View detail
Fits: HONDA XLR250 Baja, HONDA XLR250 R, HONDA XLR250 Baja, HONDA XLR250 R
light
The texture and sound became the sound that I liked that a little bass worked.
Since the previous OEMExhaust System was rusted and the exhaust leaked, it replaced it. So the sound's LargeSmall is unknown.
We also exchange Manifold, but we needed a little adjustment at the joint.
View detail
Fits: KAWASAKI SUPERSHERPA [Super Sherpa].
Maintenance property - Designality - Sound quality is Number one
Since it was installed from the time of second-hand purchase of the vehicle, I will review it.
OEMSilencer (After regulation) Compared to the low Torque Torque will be missing, there is no problem with KL 250 Sherpa's SUPER Low 1st gear start.
Obviously the RSV tube has better dandruff, the high rotation is easy Level.
Because KL 250 Sherpa has no Number Plate in Side cover, the intermediate Pipe to Silencer is slender, Silencer extends according to the angle of Seat I think that this product is the most visible.
Also, the point that you can easily feel OH with Hex wrench is also very GOOD for Sunday DIY man.
It is regrettable that simply stopping Silencer and intermediate Pipe with Clamp is certainly the point that exhaust leakage occurs. Pipe gets dirty due to leakage, so those who are concerned are liquid Gas essential.
Well, if it is 30,000 yen, I thought that it was an Exhaust System which I bought and bought for a change in purpose etc..
View detail
Fits: SUZUKI DR250R, SUZUKI DJEBEL250 [Jebel] XC, SUZUKI DJEBEL250 [Jebel] XC
Purchased by appearance and weight saving
I attached it to DJEBEL 250 xc.
I installed the Exhaust System for the first time, but I could install it without difficulty.
As for volume, I felt somewhat quiet than NORMAL when Idling but it turned out to be a suitable volume as soon as I opened it.
The sound quality is a light feeling like Tapa Papa, but it's crisp well and I personally like it.
It became somewhat lightweight as it looks better, so I am satisfied with Large.
View detail
RSV Suko! By uncle
With this pumping system, it does not run much, and the sound is also shabby
However, from the attached Inner silencer, instead of the optional RSV Competition inner silencer, further cut the Punching mesh attached to the entrance to that Inner silencer to make it straight, the Torque also gets better and the sound gets a bit thicker and runs well It is!
By the way, I feel that Front pipe is not compatible with SP Tadao PowerBox.
I am not convinced, I cut off the Box which is the sale of SP Tadao, asked for the vacant hole to be closed by welding, it is combined with RSV Silencer as a straight pipe which is just bigger than OEMPipe!
Air cleaner Box If processing and combustion are also tightly tight, the merit of RSV Silencer can be fully tasted!
Very good Exhaust System!
View detail
Fits: HONDA XLR250 Baja, HONDA XLR250 R, HONDA XLR250 Baja, HONDA XLR250 R
Hey all! I have a 4 Stroke RSV Silencer Series III on my Honda XLR Baja. It works great and I really like the sound it makes! It came without the mid gasket (picture). I had to improvise, but I am still not satisfied. Where can I buy the origi
Hey all! I have a 4 Stroke RSV Silencer Series III on my Honda XLR Baja. It works great and I really like the sound it makes! It came without the mid gasket (picture). I had to improvise, but I am still not satisfied. Where can I buy the original mid gasket for the RSV Silencer Series III ? Thanks! View detail
Fits: YAMAHA WR250R, YAMAHA WR250X
Silencer suitable for use
Trying to replace WR250R Silencer
I was considering it for a long time
Many people were wearing FMF
I was also considering with FMF
There is a vehicle wearing in some places
If you let me hear exhaust sound
Rejected because bass was too strong.
And I am concerned about welding details (Flowstone United States w)
Finally got a candidate
Leo Vinci and RSV.
But Leo Vinci is surprisingly heavy
And Silencer fixing is Carbon band.
I am mainly using forest roads
If the tide falls and the Band breaks.....
So we decided to last RSV!
By the way, because Barrel 4 was small in capacity, it was not listed as a candidate.
First of all, making is very good.
Fossil FOR JAPAN MODEL production. Welding well integrated.
Easy to install without any hardships.
There is nothing like common Bolt hole misalignment.
And the weight is about half! Very light.
After attaching and checking each part
Small exhaust leakage from Silencer port.
Rose once, apply liquid Gasket.
This alone eliminates leakage.
If exhaust sound is included SilentInner
Very crispy "Papa papa papa pa!"
The exhaust sound. When the bass is on board
Because my ears are so strange, it sounds just like the ideal.
It became a sound like a single cylinder.
Although high revs think that elongation is bad at this Baffle
Because I am emphasizing low and medium speed
This use is enough.
Incidentally
As SilentInner exhaust leakage occurred
Once removed and also apply liquid Gasket there.
As soon as you remove it, set the hole of Punching mesh attached to Baffle to φ1. 8 to 2. Expanding to 4 Large.
Bolt fixing the end peace also
Because the stainless bolt that comes with it causes grinding
To prevent galling
Apply Grease to Posipo Aluminum Bolt
attachment.
The sound improved a little and it got so much better.
Animals at the forest road and
To hunters with pest control
It seems to be noticed as soon as possible.
Anyway making is very beautiful.
I decided to purchase another
It's easy to purchase Repair Parts.
Because I heard that other Manufacturer is various troublesome feeling.
If you think you can use it for a long time
I think I did a very good shopping.
View detail