Reviews
Half Finger Gloves
In the summer, when removing gloves from hands, it was difficult to remove them when they were sweaty, but this product has an original loop for removal and can be taken off smoothly.
The fit is a size M, but it is slightly large.
View detail
Good vibes
It is a little difficult to adjust the movement, but I am satisfied. View detail
It does a good job except for the fact that it is not a good job.
This is an inexpensive Chinese Case that I have seen on some sites. (It has the company name of "Rough &Road" on it, though.)
Inexpensive but does the job well. (For now)
It is installed on a CT125CT110 HUNTER CUB (JA65), but the Attachment for CT110 HUNTER CUB is not necessary and can be installed separately.
It seems to be possible.
When the case is installed and the Center Stand is applied, the front of the case rises up like Seesaw. (Rear load Large)
Case surface is pear, satin, matte, textured and very dirty. Dust sticks to it.
View detail
Fits: HONDA CC110, HONDA CC50, HONDA CT110, HONDA CT125, HONDA CC110, HONDA CC50, HONDA CT110, HONDA CT125
Very cool under the buttocks.
After parking under the blazing sun, it is sometimes uncomfortable to sit on the Seat because it is so hot, but this Mesh cover helps a lot. The MeshMaterial itself does not hold that much heat, so you don't feel it as hot.
Besides, once you start running, you will feel very cool under your buttocks because the wind will be blowing through the 3D MeshMaterial in a nice way. It is too cool when the temperature is low. It might be better not to use it in spring and fall (Lol) Of course, you'll have to leave it off in the winter.
Note that MeshMaterial is more slippery than SeatMaterial, so the holdability of the buttocks will be a little lower. Also, since it is 3-D Mesh, it is thicker and the seat height is about 2 to 3 cm higher, so please be careful about the footing.
Also, Seat shape and the shape of this product. (circular) is not Fit, so some may be bothered by the feeling of doubling up at the aperture on the front side of the Seat when it is covered.
View detail
rather short
I was not sure about the Type, which has a removable Inner, but I decided to buy it for winter use only.
The tightness of the Storm guard belly band and Waist belt makes it easier on the lower back.
I would have liked the hem to be a little longer, but when I ride my Motorcycle, my ankles stick out. Even if I stopped the anti-slip-up loop, it came off due to the absolute lack of length. It was a shame because the rest of the garment is good.
View detail
A reliable Brand Gloves as expected
Update on 5Season used GOLDWIN Winter Gloves with holes in the fingertips.
Since it is the end of the season, the stock is limited, so we chose ROUGH & ROAD, a favorite of 3SeasonGloves!
The leather material is a little hard and firm, so much so that it takes a lot of grip strength just to goop it up at first.
I'm hoping that as I use it from now on, it will fit in better.
The thermal performance is about the same as GOLDWIN, but in midwinter cold, I'd say 30 minutes is the limit.
View detail
Mystery Spec. but not bad.
Was the one you received as per Image?
As for the 38mm width Leather belt, it is as shown in the Image.
It was unexpected that the buckle section was arcing against the curves of the body, not along them.
The surface is a general leather belt texture, just like the Image.
The reverse side was a little crusty and did not change after applying oil, so it was not expected to feel different to the touch on the reverse side.
[How did you feel about the Fit?
It is not uncomfortable as a wide Belt, and it is usable as usual.
Buckle was a mass of discomfort from the structure against the body and the interchangeable spec. so the original Buckle was never used. HONDA×KUSHITANI]Garrison Belt:https://www.webike.net/sd/24605446/ It was used by converting it to the one of
How was your experience with it?
Duration of use:Continuous use from approximately March 2023 to March 10, 2024.
Worn clothing:Uniqlo or Muji Jeans
Frequency of use:High because I use it every time I go out regardless of whether it is for motorcycle or private life.
Very, very ordinary, Belt.
The company name and manufacturer's logo are printed at the base and tip of the belt, both of which are still firmly recognizable and have not been crushed or chipped.
[Was there anything that disappointed you?
The back surface of the tip of the Belt is rough from the appearance, including the fact that the back surface was crumbly, which makes me a little concerned about the durability of the product. However, there is no problem with the appearance of the back surface when using it, and we have not observed any peeling on the grain.
What are the specs of the product, such as protector?
Buckle itself is a mysterious Spec. that is interchangeable from the start.
PackingButtonQuantity made of Gold genus:2pc. Set only, so no tools are required for implementation.
Once the buckle is replaced, it will never be changed again, and since it is secured with Screw Lock agent, it is not known if accidental removal will occur.
The buckle attachment area also has a little room, so you can basically expect a 38mm wide buckle to fit.
Belt holes are 3mm long×4mm wide and oval in shape. However, by continuing to use the same hole, it can be widened enough to pass through an eyelet with an inner diameter of 7mm.
How did it compare to other products?
・ HONDA×KUSHITANI Garrison Belt:https://www.webike.net/sd/24605446/
The two companies share the same belt width, price, and the fact that they are made by companies related to motorcycle accessories, but the Logoetc. company is printed and with color on the other side. The durability of the Logo is superior to the other one, as the paint inside the Logo may crack with continuous use.
The texture of both sides is the same, and the other side is not shiny, so the durability is probably better than the other side, but both are made of leather, so they will last for a long time.
・EDWIN
I think I bought a Belt of the same width for about the same amount of gold, but this is the only one that adds the Motorcycle element to the Belt product, in that it is made by a Motorcycle product manufacturer and has Logo on it.
[Deciding factor in desire to purchase].
The color scheme was similar to that of YZF-R6 with Stitch's combination of Blue and White. Also, because it was a BlackBase and a non-synthetic leather belt.
Even now that I am using the product, I have no idea why it became a Spec. with interchangeable buckles, but when I port it from a Belt of the same width, I can use it without any discomfort at all with the previous Belt, which may result in a product that is more flexible and easier to use.
View detail
It is quite warm!
Magic tape sticks here and there, but the design is good!
I like it a lot because it doesn't look like it.
View detail
It was a Size perfect fit for DAX.
DAX with DEGNER's NB-3 and Quantity:Set installed
Since the car body is small, we chose a small bag as well.
We chose this product because it is small in size.
By securing the bag to the Rear Carrier's mounting screws, the bag could be installed with good balance.
If the carrier mounting screws were 10mm, it would have seemed to fit better without the attached plate, but since they were 8mm, they were installed via the plate.
In that sense, I would say that it has a high degree of installation flexibility.
I think it is also compatible with the Bag to which it is attached, but I thought it was an Exactly product for the 4mini.
However, since it is either a fixed Screw or one, it is necessary to check for looseness from time to time.
View detail
Warm! Firm!
I bought this jacket because I wanted a brownish jacket. It is a little lighter in color than I expected, and I would have preferred it to be a little darker, but I'm sure it will grow on me. I've only worn it a few times, so it feels a little stiff, but I expect that will change as I get used to it. View detail
mild
I have been using inexpensive products and they do not protect me from the cold at all.
This product has a different texture and is quite childproof.
View detail
mild
The fabric inside the Gloves is very comfortable and pleasant to the touch.
It is GOOD that it covers the wrists well!
If you ride for a short time, you will not feel cold at all, but if you ride for almost an hour, you will usually get cold.
It is not electrically heated, so there is no choice there.
The weak point of the Winter Gloves is undeniably the operability, which I found quite difficult to operate until I got used to it at first.
View detail
Parenthesis OK
I am usually a M size, but I bought a L size.
I bought it thinking it would be Large, but it is Exactly.
I feel like I should buy 1Size above.
View detail
Inseam..!
Adjuster is easy to use, no problems!
Stretchability no problem!
One drawback, I guess it depends on your taste, but the crotch was a little shallow for me….
View detail
Fit is not great, but very warm.
[How is it used?
Winter commute protection
Was the one you received as per Image?
I thought it would Fit on the legs a little more. There will be a gap. See photo
How was your experience with it?
Very warm when worn under windproof Rain pants
[Points to note]
I think it is better to wear it under the Large size Rain pants, because I think it is easy to come off when falling down etc.
How did it compare to other products?
No comparison products
View detail
I like the way it looks.
I bought it because it looks like a single rider, but it is comfortable to wear and the wind blows through it well during the ride, keeping me cool.
I bought a special Inner for this purpose.
View detail
short (of a person)
[How is it used?
Was the one you received as per Image? Yes
How was your experience with it? I wear it when it's chilly, and I always put it in my motorcycle because I can make it compact.
[Points to note] The length is short. 1SizeLarge is JUST right.
How did it compare to other products? Windproof and cosy.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Great product!
I have no complaints about the windproof effect! I wish I had used it sooner.
The reason for 4 stars is that the zipper of the product touches my neck directly, which is very uncomfortable. I will not get hurt etc., but if you can devise something on the inside so that the zipper does not hit my neck directly, then I would give it a star.:5pcs.
Now if only the price were lower, this would be another star Quantity!:5pcs.
View detail
Yep it works as advertised
I keep it in a side pocket in my tankbag so it's easily accessible. All I need to is pull over, take it out & fit it onto my finger. Quick, easy, simple. It dosent feel intrusive when fitted on my glove & is particularly useful when I really need a clear view ahead when approaching a corner or intersection in the rain. It's more effective at improving vision in the wet than just using a finger or palm, or turning the head to bead the rain off the visor. Unfortunately I do fear it will be fairly easy to lose, so I'm considering buying a spare. View detail
Good to have it installed.
When I was touring in the woods, I was wearing glasses, and I was having trouble putting on and taking off my goggles. I was looking for something and found this Easy Strap. Now I wish I had installed it sooner. View detail