Reviews
Convenient for long touring
The large size is just right and eases the fatigue of long touring. View detail
Highly satisfactory and convenient product!
I wanted to attach and remove Goggles easily, so I bought it.
It is as convenient as I had expected.
If the fixed position is slightly off, Belt can be adjusted, so Large is sturdy without that much nervous positioning.
If I had to say, the hardest part would be removing the Belt from my Goggles.
Strap for this product is not explained, but the structure will tell you how to fix it.
View detail
I have been using it for a long time.
Do I have to remove the Goggles when wearing the Helmet? Yes, but it is easy because you only need to remove the Magic tape.
I change it every time I change Helmet.
The previous version had the resin in the same color as the Strap, but the MODEL has been changed and the resin part is now only Black.
This time, I made the Goggles in Black and the Strap in Black, so I don't mind.
I like it, although it is more expensive than I expected.
View detail
For X14 Interior Repair
After washing the interior of my X14, the Sponge on the top of my head was falling apart, so I bought this product FOR REPAIR.
Cut the missing sponge part to a large size, and cut it further so as not to block the air hole part.
Attached to firing Styrene on HelmetBody.
You can easily cut it into any shape you want with Scissors.
The original Sponge was sagging, so even with 6mm thickness, the Fit feeling seems to have improved.
View detail
I love using it. Definitely a great product that I can recommend.
I have been using it since my previous Motorcycle, and now I have changed to a new one. The purpose is to prevent rubbing when using Side Back.
I think it used to be thicker Seat.... My memory is a little fuzzy.
It was much easier to use because it was thinner in my hand than I remembered.
The description of the product is Strong adhesion but it's not like it won't come off once it's attached. "Detachable." This is a Type that can be used to
By the way, the reverse side can be recovered to some extent by washing it with a neutral detergent.
Rather, it is this ability to attach and detach The best." and can be detached when needed and when not.
When I didn't need it, for example, I would stick it on the door of my Shoes box or on a smooth surface.
The use is pretty much infinite Large, as shown in the second image.
Seat itself is not very elastic, so three-dimensional curved surfaces should be viewed as almost impossible. It is necessary to devise a way, such as giving up on a clean installation or making a good cut to let it escape.
It contains 3 sheets of 30×25cm, so it is about 3 sheets of A4 size. So, I think you can keep 2 sheets as a spare if you have a certain level of anti-scratch level.
I think it is OK to replace them more and more as they gradually become yellowish due to ultraviolet rays.
OneQuantity for TouringRider:You will not lose anything by purchasing Set! No regrets! Treat before the scratches show the substrate!
View detail
Beware of sunburn
Was it a Short Sleeve T - shirt now? It is so airy and comfortable that you would think it was a Short Sleeve T - shirt now. It also looks almost see-through with what you are wearing underneath, so be careful if you care about that. I wore it on a sunny day, and from my wrists to my elbows, it was almost as tan as a T-shirt. This is such a comfortable and good product that it is the only one I would wear on a midsummer day. It feels almost naked, so I recommend you to prepare a windproof inner for 25-Degrees and below. View detail
brand items
Throttle assist is installed on most of the motorcycles I own, and it is very useful for large motorcycles to reduce fatigue when touring. It may take some getting used to, but you will soon get used to it. when adjusting the throttle assist, turn the Axel to the closed position. View detail
Satisfied
I'm 176cm80kg and I'm an XL. I thought it might be too small, but I guess it's better than too big.
The wind does let it through, so it's cooler as long as you're running.
Simple and good design
View detail
![[Special Price Item] Wind Guard Slim Inner Jacket](https://img.webike-cdn.net/catalogue/images/31930/rr7987bk_01_TS.jpg)
Silhouette is also cute (?) Masterpiece Inner Jacket by long-established Laflo
By wearing this Rufflo SlimInner Jacket inside, I can use the Punching leather jacket from the end of May to the beginning of October, which I used to wear only in July and August. Punching leather jacket is characterized by its light weight and coolness.
Even in midsummer, the compactness of the cuffs is well thought out, such as the fact that they can be thrown into the Motorcycle Accessory Case when the temperature rises, even if you put them on early in the morning and leave, and the fact that you can put your thumbs out through the holes in the cuffs to prevent them from sliding up when wearing the Outer Jacket. It's very well thought out.
Moreover, the design, which seemed to be a little dowdy and traditional like Laphrodesque, was also a hit with the fashionable young people. That Jacket is cute. I was a little embarrassed and pleased, but also strangely surprised to see how a different viewer can change the way one looks at something.
The price was a bit high, but I was excited about it, and I can say that it is inexpensive enough for this function and design.
However, there was one problem:the first time I put my thumb through the thumb hole in the cuff and bent my wrist, the seam broke and the cuff opened completely. I think it would be better if the cuffs were made a little sturdier and the thumb holes were eliminated so that the troublemakers would not have to be repaired.
View detail
Surprisingly cool
I went on a touring trip when the temperature was 35°C. The denim part was rather thick, but the wind came in through the mesh parts in each section, and it felt good while riding. I chose this product because it was much lighter than other mesh pants also made by RoughAndRoad. View detail
It's nice and luxurious.
The design of this jacket is simple and the rider's jacket is cool. The quality is good for the price and each part is well sewn. The length is short and the silhouette is good. View detail
Total is the best, with a few words to say about the size and the fine workmanship.
New Materials PAXMesh NEW" The outer fabric is made of a hard, supple, and durable material without the softness/brittleness that is often associated with mesh.
It is indeed made of a hard fabric. The fibers are thick and look strong.
In return, it feels heavier than a mesh jacket, but it's much lighter than a leather jacket.
I thought that the thicker the fabric, the better the ventilation, but the thicker the fiber, the rougher the weave, so it allows air to flow through.
Sense of Size
163cm60kg and used M.
A little long, but I guess that's what you get with single ridersSilhouette. I prefer shorter length.
The arm circumference is so thin. Especially the wrists are so thin that I can barely close the fastener. If you have thick arms, you can't close the wrist fastener.
Protector won't fit in the thick stuff either. I have a flimsy Mesh in my shoulder and elbow.
His body is thick! His torso is so thick that I think he could go up to about 75 kg for his height.
Silhouette is a slender design, so it would be a waste if it were built with a slender design, which would make the parenthesis even better.
I have a ProtectorPocket on my chest, so even if I put Protector in, it's still too thick.
This jacket has thin arms and a thick torso, which is a bit on the skinny side or the fat side!
By the way, the chest protector is not the vertical one of Raflo. Raph's only mesh protector is a flimsy one.
I put Alpinestars NUCLEON FLEX PRO Ci CELevel2 for ventilation and use double-sided tape to close the large pocket.
Alpinestars:NUCLEON KR-CELLi CELevel 1 was put in the back.
◆Pocket
Do you need the Inner Pocket on the Right? I cut it off because it makes the mesh less airy.
Why do you need two left breast pockets? The smallest one doesn't hold anything.
Even if I make the Protector chest mesh, if I use 2 layers of Pocket here, there will be 2 layers of Jacket fabric inside and outside, and 2 layers of Pocket inside and outside, for a total of 6 layers of fabric...will the ProtectorPocket and Protector together allow any wind to pass through!
SmallPocket cut off the inner fabric and glued Fastener to make it Dummy.
By the way, Mesh is also used for fabrics in Pocket. But don't pile too many layers on top of each other!
◆Impressions
The fabric is stiff but not difficult to move around in. The Action Pleated back makes it easy to move your arms and shoulders.
Stiff fabrics are How sturdy." It is very good to have the peace of mind that
The fabric has excellent ventilation. I would like to see the construction of this product marketed in this way.
Windproof Inner (sold separately) is Quantity:I like the fact that it can be set.
◆Requests
Shorten the length by 3 cm and make the arm circumference (from elbow to tip) 1~2 cm thicker. Make the body width 5cm thinner. One chest pocket is fine. No need for an inside pocket.
Then, Simple design/great ventilation/elegant silhouette/easy to use It will be the best product of its kind.
View detail
![SEA BREEZE Dry Through Insole [SEA BREEZE Dry Through(R) Insole].](https://img.webike-cdn.net/catalogue/images/90162/sb-005_1_TS.jpg)
Recommended for the hot season!
[How is it used?
I bought it for the Insole of RSThailand Chi Shoes and use it in Touring Main.
Was the one you received as per Image?
It was as per Image, and the size was about 28.0cm in de Fault, and it was easy to cut and match the size with Scissors, etc. because of the grooves.
27.I used it cut to 0cm and it was also perfect for RSThailand chi shoes.
How was your experience with it?
It works quite well! Shoes tended to get hot and stuffy, but now they are less annoying and seem a little cooler. I'm glad I switched because it's hot in the summer.
[Points to note]
I had no problem! Just be careful when you cut!
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Note that the lengths are different even within the same Manufacturer.
The mesh is not so noticeable at a glance, and it is for motorcycles! It is good that it doesn't look like a mesh.
The non-Mesh part is a little thick for summer, but I personally like it because if it is too thin, I worry about protection and flapping.
It was 34 degrees Celsius and sunny, but it was more like not hot than cool.
The only complaint I have is that the Knee Pad is a little too close to the inside, which may be due to my position.
I also have Riding Cargo Stretch Cotton Pants LF of the same size, but the length is almost 8cm different.
View detail
Excellent ventilation
I am wearing a mesh jacket, but it is old and the spinal pad is made of a urethane board. The Spinal Pad is made of a urethane board, which is not breathable, so when I stopped, it was sticky and stuck to my back. I looked for a waffle-shaped Mesh Pad that has good ventilation, which is now the mainstream, and found this product that seemed to fit in terms of size.
My impression when driving is that it is significantly cooler when running because of the wind draft. The shoulders inevitably come in contact with the back, so there is some stickiness, but the entire back is now cooler and less stuffy when the vehicle is stationary. Safety is not so good since it is made of urethane and mesh, but I think it is better than nothing.
Considering the comfort when running, I think the cost performance is excellent. If you are looking for safety, I think you should buy an expensive Mesh jacket or Spinal Protector. If the size fits, I would recommend replacing it.
View detail
Anyway, it is small and light.
Haven't used it yet, but bought it for Touring carrying.
Anyway, it is a small size, so it is easy to store.
View detail
Windproof and heat-retaining.
Keeps warm below the knees and windproof. Just right for spring and fall.
The texture of the product is not thick, and because it is PelePera, it looks cheap, but if you apply leather maintenance oil, etc., a little gloss will appear and you will be satisfied with the Level.
Recommendation
View detail
Thin, lightweight, and inexpensive
[How is it used?
I purchased the soft protector for touring, winding, and highway use because I thought the original soft protector would not be safe enough.
Was the one you received as per Image?
It was just like the Image as shown in the product picture and Review.
How was your experience with it?
It is thin, and the fit is good because it is bent to follow the ribs. The weight does not bother you once you put on the Jacket.
[Points to note]
Note that this is not CE Standard compliant, so be careful if you care about it.
How did it compare to other products?
The plastic part is quite perePera, so the actual defense performance may be a little inferior.
【Review】
Considering the defensive performance that seems to be sufficient at the public road level, the lightweight and thin fit among hard protectors, and the price, I think the cost performance is quite good.
View detail
cost-effective
[How is it used?
I purchased the soft protector because I thought the original soft protector would not be safe enough for use on touring, winding, and highways.
Was the one you received as per Image?
The thickness, weight, softness, etc. were generally as per Image.
How was your experience with it?
I think it is one of the thinnest and lightest of the Hard protectors. After installation, I felt that the Jacket became heavier when I put it on, but once it was on, it was not so heavy that it bothered me. Combined with its original slightly rounded shape and its easy bendability, there was little discomfort in the riding posture.
Also, some reviewers said that Hard protector is hard to put into Jacket because it does not bend, but I was able to put it into Jacket easily.
[Points to note]
It is not CE Standard compliant, so be careful if that is your concern.
Compared to other companies' Spinal Protector, the part that hits the shoulder blades is made wider, so I think it needs to be tested to see if it will fit in other companies' Jackets.
How did it compare to other products?
I have never purchased a hard protector from another company, so I can't compare, but it is by far more secure than the soft protector. (Although judging from the picture, it seems that they are considering breathability in Hard protector.)
【Review】
It can be a recommendation for those who are not particular about CE Standard but are not comfortable with Soft protector. The price is low, but I don't think it matters much what CE Standard is at the point of hard, so if you choose this product for cosmetic reasons, this is the one for you.
View detail
Let the air flow through !!!!
SlimDenim pants until now in summer (Boots in) I used to wear a pair of pants, but they were so sticky with sweat that I had a hard time taking them off. (I tried to take it off while standing up and it tipped over.) So I considered Mesh Pants and purchased this product.
This is our opinion after wearing it several times from late May to June.
Air circulation while driving !
Can maintain a silky feeling if the temperature is around 32 degrees Celsius. (I'll try Season now in midsummer) 。
Fine-tuning is possible with Waist and Magic tape. (photo1) 。
Fanny pack with carabiner hook (Photo 2) 。
The inner thighs and moist leather are attached to the hem. (Photo 3) 。
Knee Protector, can be replaced if preferred.
(Photo 4:Right is NANKAI, SDP-EK006, the soft one I prefer, and Left is Standard Equipment).
In our personal opinion, the inner thigh Leather (Back skin tone) Thanks to,
Yamaha Bolt R-Spec, can manage to withstand engine heat when stopped. (as of June) 。
I have a Motorcycle and a Knee grip and they don't slip.
Our physique
・Waist:31 (KominePants is using L:32)
?inseam:About 80 cm
We have the Size:MW was a perfect fit.
Pants are just the right length for both Boots in and Boots out when boarding.
(These pants originally have a slightly longer hem and are slightly heavier, so I feel it is difficult for the hem to shorten as it slides up when riding).
Wearing inner, I think it can be used in spring and fall as well. (We are very hot.) 。
I am satisfied with the product because it fulfilled the requirements I had Image before I purchased it !!!!
View detail