Reviews
For WORKMAN's Jacket.
It is a little too Large for WORKMAN's Mesh jacket, but this is not a problem as it can be easily cut with Scissors.
Of course, I think it can be attached to RoughAndRoad's Jacket with no problem, but I don't know because I don't have it.
View detail
Added to Rough Parka for a little ride.
It is additionally attached to Rough Parka RR7234.
I think Rough&Road's Jacket would have Standard Equipment or Mounted Space.
The shape of the place where the Parts to be protected (back, shoulders, elbows, chest) are placed is the same.
See Catalogue for details.
I used to share Hard Type RR10074 with RR7001 Gore-TexTrekJacket.
I purchased an addition to my Parka for street riding.
The protection is 4 stars compared to RR10074.
Compared to a full-scale product, the Level is better than nothing.
View detail
It was Exactly in workman's Mesh jacket!
It was Exactly in workman's 2023MODEL mesh jacket.
Large Variety Satisfaction
View detail
Thin, lightweight, and inexpensive
[How is it used?
I purchased the soft protector for touring, winding, and highway use because I thought the original soft protector would not be safe enough.
Was the one you received as per Image?
It was just like the Image as shown in the product picture and Review.
How was your experience with it?
It is thin, and the fit is good because it is bent to follow the ribs. The weight does not bother you once you put on the Jacket.
[Points to note]
Note that this is not CE Standard compliant, so be careful if you care about it.
How did it compare to other products?
The plastic part is quite perePera, so the actual defense performance may be a little inferior.
【Review】
Considering the defensive performance that seems to be sufficient at the public road level, the lightweight and thin fit among hard protectors, and the price, I think the cost performance is quite good.
View detail
Cosmetic but universal nature is…
I think it is a Protector that hardly fits unless it is a Jacket made by RoughAnd.
However, it is a Hard Type with a wide protective range and good cost performance.
I am using a DEGNER mesh jacket with a self-made pocket for Protector.
I gave it 3 stars for protection because I have never been protected by a fall, but I'm hoping for the best.
View detail
Soft pad...
Hard type is also available. Both are inexpensive. However, since it is long and narrow, it interferes with the chin of the helmet while driving. If you are worried about it, you can cut it by 2-3mm. View detail
As expected
Purchased for Rough MeshParka
The Rough Mesh Parka I purchased had a Chest Pad as an Option, so I bought it for peace of mind.
I used it for Touring at 35°C and the wind was cool and comfortable while driving.
I don't know about Shock absorbing power because of the many holes, but it's better than nothing.
I think it is a good idea. I will encourage safe driving so that I will not encounter any Case that uses it.
View detail
I attached it to a mesh jacket by WorkMa Fat.
The 2022MODEL work mesh jacket came with a ProtectorPocket, but a dedicated Protector was not sold, and when I checked around, I found that it had just the right shape, so I purchased it. As a result, I was able to use the device without any modification. I recommend it because it is lightweight, has good ventilation, and gives a sense of security. View detail
Buy to protect yourself.
I bought a new Ruffolo Jacket and an optional chest pad to protect myself.
This is a stabilizing measure in case of a fall or an accident.
It is better not to use it, but it is an insurance policy in case of emergency.
I think any Rufflo Jacket that is compatible with the chest pad is strong enough to be attached to the Large.
It is hard, light and easy to install.
It looks and feels like it will last forever unless there is an accident.
View detail
Light weight for Hard Type
I bought this because the Protector for my Raflo Air Through Parka was too thin and this is an OEM product so it fits perfectly.
Also, it is light for a Hard Type and does not make you feel heavy.
View detail
Sounds good
I am using it with my mesh jacket The protector on the chest is an option so I bought it together with the purchase of the jacket, but a certain Manufacturer's protector can be vertically larger than the Manufacturer's Large and Jacket It fits perfectly and is very nice View detail
I am satisfied
I bought this to wear on the Rough AndRoad Rough Mesh Parka I have a Thailand Chi in my summer jacket and I have a chest I'm wearing the Honeycomb Protector, but to be honest, it's not very hot in summer If it's not something you can wear to the beach, you won't wear it This Protector is a waffle type, airy and light It's light and airy, but it's not as heavy as a proper Protector There is no point in wearing it if you stop wearing it because it's too hot and uncomfortable I love it View detail
I was looking for this
I wonder if this product had been there for a long time since I never saw it even when going to a shop.
Previously I used UrethaneWaffle's for summer, but I was frustrated honestly.
Because it was unlikely to be useful at the time of Isa.
This item seems to be firmly useful when it is called Isa.
Of course It is safe driving so as not to be like that.
Large Ki is Just fit to Jacket of Rough & Road.
It seems to be used with 3 Season and Mesh jacket for summer.
I do not feel cramped as I switched from Urethane Waffle. It seems that Fit feeling improved as it is rather three-dimensional construction.
Large I am satisfied with the change.
View detail
Also OK for Komine
Originally it is for rough & Road.
When I saw Impre, I saw a comment being used for other Manufacturers, so they can fail because they are inexpensive, so I can not use it for Komine made Mesh jacket. Komine made back etc etc. Spine pad has a hole but it is hot. After reaching the hand, the air through pat of rough & Road is cut and Mesh Type Pad slightly Large type. Therefore, together with Pad made by Komine together with Scissors Small sharks Cut. On the whole MeshPad Jacket became lighter weight, the safety Pa of this hand
It was good to purchase. This summer I am able to ride Motorcycle far more coolly and safely.
Rough & Road's Jacket is bad for those who use it, but Komine made Size not suitable for Large type, but it was Large strange that the opposite did not suit.
View detail
Lightening & refreshing
Because this summer was also a hot summer, I wanted to make MeshJK cooler and more comfortable, so I exchanged it from what I was wearing from the beginning.
After installation, it became easy to wear fairly lightly, the ventilation was very good and it was more than I expected.
However, I think that it fell on strength side.
I think that it is good if it is possible to use it by dividing it as good if it is in a town.
View detail
ROUGH&ROAD Air Permeable Pad Full Set
I sew this ROUGH & ROAD Air Permeable Pad Full Set to the Reverse side of Mesh outerwear of general movement for Sports clothing.
Because I use the spinal cord Protector separately on my back also as back pain protection, I cut it by half and put it in Quantity : Pair (for Left and Right) I transplanted for the flank side of.
This ROUGH & ROAD Air Permeable Pad Full Set is easy to cut because it is soft with Waffle shape and it was easy to sew on the back of clothing.
Such a unique Waffle shape has less area to touch the body, so wearing it without getting stuck to sweat, its comfort is high, but unfortunately the shape of Waffle is less than the area of ??Penetrating part is less than I thought It's hot so it's not good.
I think that it is better to think that asking for coolness in this ROUGH & ROAD Air Permeable Pad Full Set is secondary.
This ROUGH & ROAD Air Permeable Pad Full Set is a Protector pad which is easy to process, easy to process, lightweight and very soft so it is very easy to move.
If you fall over at low speed with Dirt etc, I think that shock buffering of this ROUGH & ROAD Air through pad is enough.
Though it was rotated six times in Dirt in Hokkaido, thanks to the fact that this ROUGH & ROAD Air Permeable Pad Full Set was worn, it was quite normal without being hurt even if it was thrown to the galley.
Automobile etc. Aside from the case of an opponent or Asphalt road surface and other accidents that occurred during middle and high speed driving, I think that it can be safely defended sufficiently with this ROUGH & ROAD Air Permeable Pad Full Set if it is about Crash of a natural uneven partner at low speed.
However, it is a reality that I have to run on the paved road by the way to arrive at that Dirt, so I used this ROUGH & ROAD Air Permeable Pad Full Set in combination with the chest, spinal cord and Pants with Hard protector We are.
Merit of this ROUGH & ROAD Air Permeable Pad Full Set may be able to remove this ROUGH & ROAD Air through Pad and transplant it to another coat and reuse it even if the coat breaks or becomes bad with fall crash in many times Dirt It is an efficient product for expenses as it can be done.
I think that it is often useless for falls and accidents Level but it is better than nothing. Recommendation for mounting.
.
View detail
★WaffleUrethane★Protector pad
【What made you decide the purchase?】
"Both of the excellent breathability are achieved without compromising strength" I believed in the propaganda, I was cheap in price, looked light, the wind street looked good so it seemed to be very cool, so I tried replacing it with the Hard protector of another Manufacturer's Jacket. Was.
【How was it actually used?】
I replaced it with Protector of another Manufacturer's Jacket, it got lighter as expected, but the air was not well removed and it did not get much cooler.
Moreover, since the defense strength with Protector in each part remarkably decreased too much, unfortunately we abandoned the Protector replacement plan. (I replaced it. )
Instead, ordinary ordinary coat (Jacket) I bought them and sewed and attached each of these Protectors inside the clothes and changed the plan to make it a simple light clothing SoftProtector jacket.
【Mounting was difficult?】
Ordinary jacket I bought (Jacket) While sticking to the back seam allowance of somewhere, sewing each of these Protector while paying attention so that the attaching thread does not come out on the surface of the outerwear.
When I was young, I sometimes studied clothing jobs, so sewing is a good kind of class, was it difficult?
No no. It was just troublesome. (Lol)
【Please tell me the installation point and hang. ]
Try temporarily sewing, removing and moving the Protector of each part to the back of Jacket many times, wearing and removing Jacket many times, searching for the installation position so that Protector of each part is in the proper place We will decide each Protector to the best position.
Once the mounting position is decided, it just sews the Protector of each part sequentially to the seam allowance behind it.
[Is there anything I was disappointed about?]
With multiple Impression of the other "Thin, soft" I was told that, "I was thin and soft than I thought. "
Thanks to that, it was easy with Scissors.
[Others]
Although there was a little Gap in the initial purchase purpose and use result, it was able to be used practically as a Protector properly.
Thanks to its objective, light clothing SoftProtector jacket got one cheaply available result (Lol)
Why do not you try it too? (Lol)
.
View detail
With this I am relieved.
Purchased for Jacket of ROUGH & ROAD used before.
Recently, acquaintance fell down, I felt the necessity of Protector, so I purchased without hesitation.
For the summer, the point that Season starts Air through Pad is also very appreciated.
I would like to avoid taking care of Pad if possible, ^ ^;
View detail
since it is a season hot after all -- a Mesh jacket -- a Waffle Pat -- -- good -- coming out -- the shin. somewhat bad [ Protector side ] as a wind -- although it becomes, it is more comfortable than the usual Protector.
since it is a season hot after all -- a Mesh jacket -- a Waffle Pat --
-- good -- coming out -- the shin.
somewhat bad [
Protector side ] as a wind -- although it becomes, it is more comfortable than the usual Protector
.
View detail