Reviews
Exactly to a certain Manufacturer's Mesh jacket?
I was looking for a Chest Pad that fits a certain Manufacturer's Mesh jacket and found this product.
(Komine, see review of RSThailand Chi is mounted too low for 2024 MODEL)
I think it is CinderellaFit for me and I am glad I purchased it.
View detail
I attached it to a Mesh jacket from Kuhl Lace Miss.
I attached it to a Mesh jacket from Kuhl Lace Miss.
Cutting is required, but can be easily done with scissors.
Although the protection is better than nothing, it is not as good as nothing at all.
View detail
Plus peace of mind.
Purchased this for a Mesh jacket of the same Brand. It protects not only the upper part of the chest but also the whole chest, so I feel more secure. I was a little worried because the price was so low, but when I saw the product in the mail, I thought it was surprisingly well made and would be sufficient. It fits the jacket perfectly and is easy to put on. View detail
Purchased for insurance purposes in case of emergency
[How is it used?
Purchased for Summer jacket from Laflo
Was the one you received as per Image?
Yes
How was your experience with it?
Not as sturdy as Hard Type, but installed for insurance purposes.
[Points to note]
It is soft, so some people may feel uneasy.
In that case, you might want to buy a Hard Type Chest pad.
How did it compare to other products?
I only have OEM.
If you plan to purchase Protector later, you may want to purchase a full Protector jacket from Raflo.
View detail
Used for the company's Full mesh jacket.
I thought it was just a thin plastic board attached to a thin cushion material in order not to destroy the silhouette of the Jacket, but it is a three-dimensional structure that fits the ribs, so the fit is good, and since it is a separate type, it cannot protect the center portion such as the solar plexus, but it seems to protect the ribs on the sides. It is a separate type, so it does not protect the center part of the ribs, but I feel that it protects the ribs on the sides as much as I put it on. View detail
This could be good!
I purchased this product to attach to Workman's Mesh jacket.
The installation was smooth and the fit is good.
I thought it would be better if it were a little thicker,
Considering the price, I guess this is about the same.
I think it was a good purchase.
View detail
Good
The company's Mesh jacket (RR7308A) and purchased this product because the chest Protector was an Option.
Jacket was ExactlySized, so this Protector was installed.
I wondered if it would be tight. I thought it might be too tight, but it is not that thick and comfortable to wear.
It is lightweight and appears to be strong.
View detail
You look weak
"The delivery arrived well and the product was received well.
It looks weaker than I thought.
Just a mushy sponge? It's the same material. I was expecting something thicker, but it's a little disappointing.
I did it in a summer suit, but I don't think it will protect my body ------------------------------------ ---------------------- I arrived well and received the goods well. It looks weaker than I thought. Just a shakey sponge? It's the same material, and I was looking forward to it more. I was in a summer suit, but I don't think my body will be protected. Powered by Google Translator"
View detail
Used for Jams Gold BECK-1 Riding jacketM Size
This is a RoughAndRoad Air throughPad, which means that it is not a product that matches JamsGold's Jacket, so you are on your own regarding its use.
Each Size of Pad is
Back Pad, approx. 43 cm (length), 33 cm (width)
Chest Pad, approx. 34.5 cm (length), 16.5 cm (width)
Shoulder pad, approx. 21.5 cm (length), 17 cm (width)
Elbow pad, approx. 27 cm (length), 16 cm (width)
The shoulder and elbow pads are curved and the length is aligned with the curved surface. The shoulder and elbow pads are curved, and the length is adapted to the curved surface.
The material is urethane, so it can be cut.
The Jams Gold BECK-1 Riding jacketM Size allows me to use the shoulder and elbow pads as they are. The back and chest pad had to be cut to fit.
View detail
trustworthy
The Protector that came in the Mesh jacket was quite thin, so I decided to go Hard for safety.
It's nice because it's hard enough and has a large enough area to be protected.
View detail
It's good to use with other Protector.
The company sells Armor Hoodie and Quantity:Buy the set
In conclusion, this Single Body does not provide enough protection.
I tried elbowing a hard place and hitting my chest to test it out, but I felt a shock that I couldn't absorb.
So I used it in conjunction with the Protector, which I've had for a while and which is protective but painful to the skin, and it turned out to be a pretty good fit and shock absorber.
detail point
The thickness is about 5mm, so I think it can reduce the scratches even if it is a single body.
The overall protective range is wide. Especially the chest part is longer than expected, and it covers the abdomen. If you want to use it for something other than a rough-and-amp;road jacket, you probably need to modify it.
The material is soft and comfortable to wear. It seems to be easy to process.
View detail
Harder than Soft
I haven't tested the protection. (You don't want to try it, do you?) I bought this for my flight jacket. I bought this for the Flight jacket of the same manufacturer. The standard pad is too soft and unreliable. If you try to use other manufacturer's pad without buying this product, you can't use it because the length is too short. Therefore, this product is longer in length. It was a good decision to buy this HardPad. It is hard and easy to put on and take off. View detail
Shipping is fast
It's hot in summer, so I bought it after looking for a ventilated product because it was hot in summer. It looks weak as a sponge type, but it's better than not. And it smells a lot at first I was surprised that the delivery was so fast^^ translated by Google Translator View detail
good product
It was purchased in anticipation of the cooler months, so I think it's Large sturdy until the heat wave Safety, I think it will be able to handle light falls, scrapes, etc Well, if it is usually Speed In summer, in this lightness and thinness, I think that it is sufficient View detail
Minimal peace of mind
I know the product is the last time I bought it, but I'm actually using it (Fall accident) I don't know the performance, because I don't have any, but when I think about the feeling of security, coolness and weight, I feel settled here It is View detail
It's a soft Urethane pad, is not it?
Product is soft Amiami Urethane pad. Will it protect my body with this?
I did not match Jacket, but it became Exactly because it can easily be cut with Scissors.
Although it may be a bit better than nothing, for the time being it is OK.
Because it is cheap, this kind of thing.
View detail
Cospa good
When rolling from the front at about 30 km / h, I was wearing Raflo's FLUSHMesh Parker ?, but rolling down, Jacket broke the shoulder, elbow and armpit and it became useless.
There were no shoulder and elbow injuries in the Protector part. Protector got worn marks, but if it were not for this I think that deep scratches were made (At that time Gloves was mocking with Mesh Gloves, too, it was soooooooooooooooooooo gonna be able to see the bones).
I think that it is better than those who do not give anything (It will cost you gold after treatment expenses when injured)
View detail
It is better than nothing
I bought it for rr 7314.
Breathability is adequate, soft and difficult to get in the way and there is some shock absorption.
I wish it had been equipped from the beginning.
Since it is written as a special item for the competition in Package, it is about a machine better than not really in terms of safety.
I hope the level of riding a summer choi is good, but Touringetc. If it is, you should choose a proper Protector.
View detail
Anxiety and absence
I bought a rough & Road's Jacket so I bought it together. I am a little worried because it is thin, but there is no sense of security if there is. The price was saved by cheap price. View detail
★ Light Protector ★
【What made you decide the purchase?】
I think that breathability seems to be very good, so I tried to exchange it with Protector of Jacket for 3 Season which I already have purchased.
【How was it actually used?】
Although it was a very soft and weak Image at other people 's impressions, it is Protector which seems to be thinner, softer and weaker than the previous image actually when it arrives at hand.
Actually replacing it with Protector of the existing Jacket and wearing it, it is thin and soft enough not to compare with the Protector attached from the beginning, and it is softer and thinner than the Protector for the savergage, so it is very easy to move and distrusts the safety strength It became Jacket.
【Mounting was difficult?】
Although it was a replacement exchange with the existing hard and thick Protector, as long as the existing Protector misses well successfully (Loading) It is not particularly difficult.
【Please tell me the installation point and hang. ]
When inserting into the mesh bag for Jacket's Protector, it gets caught a little in the mesh but if you insert it while carefully removing the catch it will be fine without entering it.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I understand that it is a Protector of light-dressed Level. Particularly improved points etc. There is none.
[Is there anything I was disappointed about?]
If I thought that Waffle shape had more breathability, surprisingly the wind street was bad and it was steamier than the existing Protector.
In Protector of the back and chest, the existing Protector had a larger total area of ??vent holes than this WaffleProtector.
On the back and chest, this WaffleProtector wears the wind street worse and the defense strength has dropped dramatically, so it was meaningless to replace the internal Protector and returned to original.
【Have you compared items?】
It compared with each Protector made by Komine, but this WaffleProtector seems to be good as wind and it seems to have strength, so it was very cheap so purchase.
[Others]
Even at this impression of other people, the word "better than nothing" was coming out many times, but I felt it was exactly right as it was.
As a result, I will sew it inside the general Long Sleeve Shirt, not as an existing Jacket for ReplacementProtector, and try to use it as a light-duty Protector.
.
View detail