Reviews
For Summer Touring
[How is it used?
Purchased for heat protection during summer touring
Was the one you received as per Image?
as one would expect
Was the installation difficult?
unrated
How was your experience with it?
I usually use KadoyaBlack ankle or GAERNE145.
Compared to them, the sense of security of being protected is less secure.
Well, I think it's comfort and TradeOff.
The size is in increments of 1 cm, so it's hard to choose, but since it's a large size, it's a good choice.
I am 26.5 cm and I chose 26 cm and had no problem.
The coolness is cooler than the two mentioned above as aimed
The toe is soft, so if you use a Motorcycle with a hard Change Pedal, it may hurt your feet.
The design is good for everyday wear!
[Included Parts:were they on?
unrated
[Was there anything that disappointed you?
The attached shoelaces are White, so they are dirty.
The Left leg has a Shoelace hole for the attached ShiftCover.
One less strap, so there will be an extra strap on the Left leg, if you are concerned about it.
Quantity:Pair (for Left and Right) The length of the string needs to be changed with
Compared to the aforementioned Boots, the soles are thinner.
The feel of the footpeg is direct.
A little scary when you run to scrape the footpeg at the Corner.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Tight footwear but enough protection for ankles
[How is it used?
for commuting
Was the one you received as per Image?
Yes
How was your experience with it?
Tight fit, takes time to get used to, reflector on the heel for safety against following cars.
[Points to note]
People with wide feet should avoid it.
How did it compare to other products?
on the high side
Other items that would be helpful
Opinions and requests to ManufacturerWe would like to review the last for wider feet.
View detail
Fashionable RidingSneakers
They don't look like heavy Motorcycle Shoes, so you can go out on your Motorcycle and stroll around town without feeling uncomfortable at all, just like normal Shoes.
Not recommended on rainy days.
View detail
![SEA BREEZE MINTFitGelInsole [SEA BREEZE mint fit(R) gelInsole]](https://img.webike-cdn.net/catalogue/images/80481/sb-001B2_TS.jpg)
Feet feel good.
Motorcycle shoes tend to get swarmed easily, but after I put these on, it was much better.
I think it is necessary to use it differently depending on the season.
Summer heat is limited to adjusting with clothing, so various Items have become more and more comfortable.
View detail
Fashionable feet, too!
Was the one you received as per Image?
It was just like the image.
The heel is well protected, so you don't have to worry.
[How did you feel about the Fit?
I chose a size that is a little large since it is handled in increments of one centimeter.
How was your experience with it?
I'm looking forward to touring with it because I can match it with so many different outfits!
Since it is opened and closed with a zipper, it often gets stuck a little hard.
View detail
Universal nature of Holder ◎ Guard selects the shape of Boots.
Material of Boots on hand:The plastic shift guard is falling apart due to hydrolysis, so I asked the manufacturer for a repair estimate and they said it would take more than a month for delivery. I looked for a Universal Shift guard, but after reading reviews and impressions, I found that many people had experienced that it came off easily and was dropped, so it seems that it must be a type with a belt that prevents it from falling off as well as wrapping around it.
All of my boots and shoes are laceless, so even if there is an anti-fallout belt, there is no place to fasten the belt.
I found this product, and since the Holder is designed to be compatible with other manufacturer's Guard, I bought it to try it out.
Quantity:As you can see in the product photo, the Shift guard set matches the thicker square shape of work boots. I put the rubber belt between the boots and the slider, and cut the slider attachment part. This prevents the slider from shifting and it feels like it won't fall off even without the holder, but the shape of the shift guard doesn't match the Boots and it doesn't fit right! In the case of boots with tapered soles that are not flattened, the guard lifts off the boots toward the toes and does not fit well.
I'm not sure if this is possible, but I've been working on a separate DAYTONA. Shift pad that is hard to dislodge." I also bought a
Holder is used upside down, only Shift guard is DAYTONA, and it is JUSTMatch!
In this case, Quantity:I purchased a Set, but the Quantity:The Shift guard set is suitable for work boots with a small difference in circumference between the instep and the toe.
DAYTONA's pad fits better with tapered racing boots.
In any case, since Holder seems to be Universalistic
Recommended for Boots without strings.
Quantity:The Set is a must buy for those who don't want to damage their square shaped work boots without laces and shift guard, or for those who have a pain from Pedal hit.
Durability depends on how it is used, so it is a matter of judgment for each person.
It looks good in my opinion. I think the cosmetics are good.
View detail
You can wear them in Casual.
These boots look more like sneakers than riding boots, they are very casual and can be worn after getting off the motorcycle. They are easy to put on and take off, and with the Shift guard and Protector they are very breathable and comfortable. View detail
Not too flashy Design
The design of the shoes is very simple and looks like a Converse AllStar at first glance.
If you don't like the flashy design of riding shoes when you get off your motorcycle and walk around, this is the right choice for you.
It's nice and easy to match with everyday clothes for city riding or down the road touring on sunny days.
The OutdoorSpec. has a Block pattern sole so it won't slip on wet manholes.
The Shift guard is thin and the toe rubber is the same soft material as the Converse, so the Change Pedal hits the back of the foot when you SHIFT UP.
So you may feel a little uneasy in the long touring using the high speed.
I also thought it would be better if the Size was set in Half increments.
View detail
Cushioning is good.
I'm not sure what to do, but I'm sure I'll be able to do it. View detail
It has a chilly feeling.
I've been wearing them for a while now, and I've found them to be very comfortable. It is easy to match the size of the shoes because it can be used Cut. View detail
I bought these as CUB riding Shoes.
As a rule, Flat sole shoes are not suitable for motorcycles.
This is because it is difficult to shift or brake the footpeg if the sole is not properly hooked to the footpeg, and it is difficult to determine the pedal position of the toe with a flat sole.
However, in the case of CUB and Scooter, it is different.
At first glance, they look like sneakers for everyday use, but in the sense that they also have the safety features of MotorcycleShoes, they are the best FootWear for riding a CUB or Scooter.
View detail
This is for Engineer boots
If you use Shift guard on Engineer boots, you should have it, not only to protect your boots but also to look motivating. View detail
Can be worn on a daily basis.
I bought one with a Shift pad because I'm going to a driving school and I wanted one with a Shift pad.
The design is just like ordinary Sneakers, so you will not feel uncomfortable walking around town.
I bought the 27.0cm but it is a little large, I saw it in the store later, so I tried the 26.0cm, when I tried the 26.0cm, because it was a little tight, I thought there should be a 26.5cm. It was. (I've solved the problem by replacing the insoles and other things.)
I'm considering buying one next year as there is a mesh type available.
View detail
It's hard to keep your feet from getting stuffy
After coming home from a hot summer touring, I can resist the urge to take off my shoes and release them as soon as possible!
Eating in the Touring Area You can take off your shoes to go up to the dining room and not have to worry about your surroundings strong
They're comfortable
However, the reinforcement of Change Pedal support is nowhere near as noticeable
View detail
Tentatively
I've had mud in the Boots when I was a Muddy, so I'm putting it on as a countermeasure for that
I think it's a good stain protection The other thing is durability, but it should last a few years
View detail
It works in the middle of winter
I recommend it to protect your feet from the cold
If you don't take off your Boots, no one will notice
It's thicker and may be tighter depending on the size of the Boots
If it is loose, it is Large sturdy, but if it is ExactlySize, I think it is Large strange just to wear it
View detail
The ease of use in any location is very good
What made you decide to buy?
It doesn't look too much like motorcycle shoes
How was your experience with it?
Basically, they look and feel just like normal BasketShoes
You can get off the motorcycle and go strolling around somewhere else without feeling uncomfortable
And yet, Shift guard, Ankle Guard, Heel Reflector, etc
You can rest assured that they also meet the requirements for MotorcycleShoes You can also ride a Motorcycle
The shoes I was wearing until now were a bit thin on the skin, but I was able to wear them for a while
Maybe it feels that way because they were all thick and rigid
I have a high instep and wide feet, so I'm a relatively hard person to pick out shoes for
These Shoes fit without any problems; if you're up to about 4E, you can adjust the laces
I think you can wear them well enough
I just have to adjust the Fit feeling with the shoelaces so I can wear them
When you wear them after adjustment, you will feel a little tighter to fasten the Fastener
I can't help it, though, because there's no point in wearing them loose …
Maintenance may be necessary as it makes the Fastener vulnerable to painful use
Also, the Ankle Guard comes slightly lower than my ankle position
It is not a position that cannot be protected, but the Guard part may be a little small It is not
I think the Shift guard is necessary and sufficient, but if it's just a little longer forward
I can afford more, but so far I haven't been able to stick out or anything
I think it's something like this
[Was there anything that disappointed you?
The bottom of the shoe feels somewhat thin and comfortable There is no real harm done, though
Do you have any wishes or improvements you would like to make for the Manufacturer?
A button (Hook?) is placed on top of Fastener to prevent Fastener from going down by itself ) but
It's even safer if it's attached
If your ankles are too thick, the Fastener may come down on rare occasions while wearing them
(Not so far with these Shoes, though.)
[Do you have any products to compare it to?
Comparison, or rather, RSTAICHI's RSS009OutDry BOARiding shoes
I have them and I compared them to the ones I have
In general, it's a well-made product considering the price
It's not a skinny attack on the pass, but
For other situations, I think it can handle Large
These shoes would be great for city riding and touring
View detail
SizeLarge
Look at other reviews before purchase "Large texture" Although it was written, I think that it is better than Small, I usually think about 25. Because I am wearing 5 cm 26. I bought 0 cm, but I still went to Large.
0 in Size. It may be good to buy 5cm thought by truncating.
It is a strap and it is a note when riding. I plan to replace it because I prepared a Rubber lock string in advance.
Since it does not look like just Sneakers, durability is anxious, but if you think about the price it will be good if you have cospa, and if you do not have it,.
View detail
Design is good, I do not have much resistance to walking around the city and I like Large
I think that the feeling that the heel portion is fixed more is good?. Left toe Cover at the time of GEAR change, it is better to have a little larger Large, 5 mm to 10 mm.
Comfort and design is the best. I think that it is a bargain for the price.
View detail
Since the safety shoes currently used instead of the Boots at the time of commuting had been cracked by the Shift lever, they were looking for the Shift guard.Since the Type with which it equips with the Rubber belt was turned off in two days when it
Since the safety shoes currently used instead of the Boots at the time of commuting had been cracked by the Shift lever, they were looking for the Shift guard.Since the Type with which it equips with the
Rubber belt was turned off in two days when it walked stuck, this product was purchased in search of the Type knit by a Shoelace. a good point: He can walk, equipped.
Wearing is firmly possible at a Shoelace.
Color which cannot be easily conspicuous.
Firm intensity
a bad point: Because of an egg shape, when you walk, hit an instep and it is painful.
Since it is only one color, shoes are chosen.I am glad when there are various colors.
View detail