Reviews
I am less prone to headaches!
It has layers of SoftSponge and Semi-hardSponge with Seal for easy application, and when I put it in the Reverse side of my Helmet cap and tried it on, it was painful because of the tension of the bee so far, but it didn't bother me at all!
SHOEI's Helmet, which I liked but had put away without use because it hurt when I put it on, has been restored to the army! I wish I had known about this product earlier.
View detail
Fishing adjustment for Helmet.
If you choose a loose size, there will be a gap above your head and the position of the helmet will not be stable. In such cases, the Universal Fishing Spacer comes in handy. There are three different thicknesses to fit the gap. Cut and use according to the shape of the interior.
This is the second time I purchased this product. This time I used 6mm because the gap is small, and I cut and pasted it according to the shape of the foam so that it would not obstruct the airflow of the helmet.
Before Fishing, I had trouble with the Glasses hitting or being held in my ears each time I put it on, but after the Fishing adjustment, the position of the headband became more stable.
If you feel that Helmet is not loose but not stable, try it.
View detail
OffHelmet with Glasses
It is especially convenient when attaching and detaching the OffHelmet.
The fogging is eliminated by removing it even at traffic lights, and it can be quickly put on for running.
Convenient anyway.
View detail
I use it for EX-ZERO.
I am satisfied with both the convenience and the appearance of the product, which is exactly what I was aiming for!
The shipping from Webike was fast and courteous.
View detail
I like the ease of it
I used to love it when I used to go on my own long-distance expeditions and run Dirt to GunGun, but I don't run Dirt very far these days and stopped using it from Timing when I bought a new Helmet.
I think the reason is that I don't have to take the Goggles on and off as often anymore.
Also, the recent Strap from Goggles is so beautifully designed and non-slip that I felt it would be a shame to replace it with this one.
However, I recently purchased a new off-road vehicle, and after driving long distances, and even more dirt, I miss the convenience of this thing, so I bought it for the first time in a long time.
It is still convenient.
The design is also a bit more Edge and Sharp.
The most important advantage is the ability to quickly attach and detach the goggles with one hand, especially when attaching and detaching the helmet.
Installation is easy.
If you are not familiar with the position of the paste, you may be a little confused. (English Version) If you put it on the street, it's almost perfect.
The following are two things to keep in mind.
1.Strap size of Goggles you want to replace this with (width) to see if it fits.
Most large items can be made with this normal width, but sometimes narrow or wide items can be made with this width. (SCOTT's Advanced Gradeetc.). Since there are
2.I don't think it is possible to convert a Strap with a special installation method, so I think you need to be careful there.
View detail
If you are interested in Helmet's Size, you can find it here!
Best of all, it is inexpensive!
This Sponge can be cut as well as pasted, so the size can be adjusted by pasting it on the part of the Helmet that you are interested in.
In my case, the size of the Helmet I purchased was a bit Oversized.
We were able to match them beautifully.
Many modern helmets allow you to adjust the interior, but you can use basic subtraction to make some of the interior Sponge "Unplugged." Because it takes shape,
A little tighter..." If this is the case, there is no other way but to replace the interior.
I think it is possible to try this product for a while before that.
View detail
A must-have for the Eyeglass Rider
I had given up on OffHelmet and Goggles because I use glasses, but when I learned about this product, I bought the whole set.
The result was that Goggles could be used normally!
Although there are more removal and attachment ceremonies than for the naked eye, if you choose the OTG Type for the Goggles, you will be able to decide without problems.
It is a little difficult that one of the Strap hangs down when removed, but considering that Goggles can be used with glasses, it is not a big problem.
However Goggles can only be used with Small glasses, even with OTG display. There are many Manufacturers, so you should actually try them on your glasses before you make your choice. I recommend Scott's OTG after trying many different ones.
View detail
Highly satisfactory and convenient product!
I wanted to attach and remove Goggles easily, so I bought it.
It is as convenient as I had expected.
If the fixed position is slightly off, Belt can be adjusted, so Large is sturdy without that much nervous positioning.
If I had to say, the hardest part would be removing the Belt from my Goggles.
Strap for this product is not explained, but the structure will tell you how to fix it.
View detail
I have been using it for a long time.
Do I have to remove the Goggles when wearing the Helmet? Yes, but it is easy because you only need to remove the Magic tape.
I change it every time I change Helmet.
The previous version had the resin in the same color as the Strap, but the MODEL has been changed and the resin part is now only Black.
This time, I made the Goggles in Black and the Strap in Black, so I don't mind.
I like it, although it is more expensive than I expected.
View detail
For X14 Interior Repair
After washing the interior of my X14, the Sponge on the top of my head was falling apart, so I bought this product FOR REPAIR.
Cut the missing sponge part to a large size, and cut it further so as not to block the air hole part.
Attached to firing Styrene on HelmetBody.
You can easily cut it into any shape you want with Scissors.
The original Sponge was sagging, so even with 6mm thickness, the Fit feeling seems to have improved.
View detail
To adjust the size.
It is just right for Helmet Position adjustment, easy to use! View detail
Easy to use even after model change
It is easy to take off and put on, and I used it for the previous MODEL. View detail
A necessity for eyeglass users
Goggles to Quantity:I used to have trouble adjusting the position of the glasses when setting, but after using this, I can easily adjust the position, so I recommend Large Change. View detail
Worth a try, for fine tuning, before replacing the interior.
It is said that the best way to select the size of helmet is to try it on, but the best way is not to try on a new helmet, but to try on a helmet that has been used to some extent and the interior has become accustomed to it. (Hetero) The condition would be desirable, but then I would have to try on the ones of people I know, and the MODEL I want is not always available. In general, helmets are not replaced that often, but the interior will always be worn out. Even if you choose a tighter fit when it is new, it may become looser than expected. In my case, with ARAI, I am JUST an XL when new, and an L is too tight, even assuming interior Downs. But I am an ARAI believer and have 4 Helmets, all ARAIRX7. I have 4 helmets, all of which are ARAI RX7, and I use them according to the motorcycle I ride and the wear I'm wearing at the time, but I still have a bias in how often I use them, and even with the same model, there are differences in fit. I like RX7X Kiyonari Birdco, which I have been using frequently recently, but when I ride Panigale, which has a tight forward lean, sometimes it becomes forward leaning, so I thought about changing the ARAIOEM System interior from the standard 7" to 10", but it is made-to-order and the delivery time is 3 months! The price is also about 4,000 yen.
So we decided to try this product anyway.
Result? ... ・ Except for the cheek pad, the fit is considerably improved, but not too tight. It is also less likely to drop forward. The only thing left to be seen is how long it will last, but since it is inexpensive, I will replace it if it gets loose again. I bought two of these for other helmets as well.
Easy to install. Kitchin and Quantity:If you set the double-sided tape, the adhesive will not shift in some places. It may be better not to stick the double-sided tape too tightly, considering the possibility of positional adjustments or replacement.
In the case of RX7X, the air inlet hole in the center is covered, so we cut that part only.
I would recommend this to anyone who wants to regain the fit of their favorite helmet that has become a bit loose.
It's worth a try.
View detail
Deodorant effect and sweat absorption effectLarge!
When touring in the summer, sweating and the smell of sweat make the inside of the helmet smell very unpleasant. The Helmet liner that I installed this time is not only deodorant effect and sweat absorption, but is also good because the hairstyle does not fall apart too much. It is also a high cost/performance product. View detail
It's not a pretty sight.
I have a tendency to have extreme stiffness around my neck and shoulders if my neck is too tight.
I couldn't protect myself from the cold in a good way with the Neck warmer etc. (MaskType has trouble fogging up my glasses).
I used to just fluff up the schmag in a thin layer, but this product that covers the entire Helmet is very nice!
It's very easy to get into a prone position as the neck is free and not too tight.
It's also GOOD that you can cover your chest with a flap!
Is it more of a neck or Helmet area than it looks in the picture? Smaller than I thought, but it takes a lot of effort to put on the edge of the Helmet.
I was able to put it on my Helmet (RapideNeo and Off-roadHelmet) for now!
It may be a little difficult to adjust while driving because the size is too tight and the aforementioned non-slip is firmly attached to the Helmet.
It might be a good idea to leave it on for the winter season!
Here are the bad points
Perfectly windproof, but not breathable, so it'll steam.
The mouth shutter is hidden, so the shield might fog up in the rain.
Also, with the ARAIHelmet, the bench in the back of the neck is blocked up due to the structure, so it gets steamy.
As for the price, I personally think it's a fair price because it's the best product I've ever seen.
View detail
ROUGH&ROAD Helmet Spacer
I bought this "spacer" to raise the seating height my Shoie GT AIR. I would have view issues when I would ride at high speed or leaning into the corners. By raising the way the helmet sits on my head, I could see more. It worked well. Then I bought the new Shoie NeoTecII and JCruise. Strangely enough, I believe that Shoie changed the sizing on their helmets as both helmets fit fine in the cheekpads, but loose around the cranium. I took my ROUGH&ROAD Helmet Spacer and installed it in my J Cruise and the helmet now fits fine. I might have to buy XL helmets in the future, but right now, I'm sweet thanks to this product. View detail
Helmet perfect fit Fit ♪
SHOEI's Off-Road Helmet "VFX-W" I used this product for M Size.
When I was continuously running long in the off-road, I noticed that Helmet's interior paddle was getting wet with sweat, and gradually the Helmet's Front was slipping downwards.
But, S Size feels that it's too small, and you can try replacing it with a new gold quota - - -
So the off-road companion taught us this product.
If it is this price, even if I fail, I feel like giving up, so I bought it!
There are things of 6 mm thickness and 10 mm Thick, but purchasing 10 mm Thick by Cut with Scissors and easy adjustment.
First I removed Helmet's interior pad and tried applying this item.
There are six legs radially extending and there are particularly long legs by 1 pc. It seems to be basic usage to set this to come to Helmet's Rear. I also did so.
Try fitting all interior Pad of Helmet back.
Because I did not cut one place, I wonder whether it will be too tight - - I thought, but I was happy to have a good feeling with a single shot.
Then disassemble again, peel off the Tape of this product and pasted it. Six legs stuck to the periphery so it was hard to paste slightly, but in the end it could be pasted without problems.
After that, she suffered 100 consecutive minutes at Enduro race, but Helmet did not go down as usual.
Also, though I thought that I had a headache when I had a hard time with Size, fortunately I was durable with Large.
Very cheap, I was able to easily make Helmet to Exitly Fit myself ♪
I appreciate my friends who taught me.
Recommendation!
View detail
Fine adjustment of Helmet
Purchase Helmet's Size fine adjustment.
You can fine-tune Size if you get a little Large.
The price is reasonable and texture is satisfactory.
There are also two types of thickness Please purchase according to the application.
View detail
It will not be a Mohawk
There is a groove in the inner parietal part of SZ - RAM 4 so that air can pass, but as long as I am wearing short hair, my hair does not go to sleep there "Petit Mohawk" Become.
By attaching this, it will not become a Mohawk.
It would be nice to wear Inner Cap, but it became troublesome and found this product where I was looking for a substitute Mohawk countermeasure article.
Although it has nothing to do with the original use, people with similar troubles can try.
View detail