Reviews
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
In comfort, it attached so that a path-through-a-wood run could be carried out. 4MM thickness differs in sense of security. It was not distorted and stopped also worrying the stone which hits a crankcase in a rash thing.
In comfort, it attached so that a path-through-a-wood run could be carried out.
4MM thickness differs in sense of security.
It was not distorted and stopped also worrying the stone which hits a crankcase in a rash thing.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
It is strong.
It is a necessary defenseItems on forest roads.
It will be covered with dents from stones hitting it, but it will not break.
The defenses are adequate.
No stones hit the Engine and the range of protection seems adequate.
There is a hole to drain engine oil.
It is advisable to remove the undergarment and the oil before changing the oil.
I can hear echoes when driving, so I hope something can be done about this.
Tolerance.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
It looks perfect.
I highly recommend the Under Guard from Laflow, it's easy to install and very cost effective. View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
I am disappointed this time
I liked that I had bought CRF 250L before and so I tried buying for WR 250R this time.
For CRF, even if Bolt drops out, it has been made to have a structure where Color stays caught or it is made by thinking carefully so that it can be fixed firmly to the car body, but for WR, we normally use 4 M6 Bolt It is a simple structure to stop on the car body through Color. When Bolt comes out Color will definitely disappear. I think the thickness of the Aluminum itself is 4 mm, but I think that the mounting strength is not good. It was better than I thought for CRF, so I was slightly disappointed this time, but it seems that other companies are similar...
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
It is mandatory in garage
It is indispensable for the protection of lower rank! It is safe because you do not have to worry about cracking Crankcase even if you ride on the rock. Making is solid and easy to install. It is important not to leave it attached, to occasionally remove it, clean it, and check if there is loose fitting. View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Let's make another one next.
Whether I'm not happy with the Under frame Curve,
Subtle feeling of Fit is bad.
Moreover, since Rear is warped, when lifting by STAND
There is bad fitting there.
Well, as long as you cut off the warped part of Rear.
Although it is 4 mm thick aluminum, its strength is sufficient,
If you put on without pasting Sponge etc.,
The echo sound of the Engine is really noisy.
Especially the Normal muffler is concerned about the reverberation sound.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Is it good?
I bought it because it was cheaper than usual at Sale.
Although it was easy to install, I thought that it was perfectly Fit, so a delicate gap was created and it was not Large satisfied.
However, things are certain, and there was no problem with Large.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Necessities
Partial for Dirt driving is indispensable.
ZETA is a lot of my friends around and I purchased it because I like Rough & Road like Design.
Since it was also used for the XR that I was riding in the past, the reliability is perfect.
View detail
Awesome durable.
As you run through the gravel road you can hear the cancan sound so there is a sense of security that you guard
After installation, it seems that rattling was hit by contact with Frame so use heat resistant Rubber in between.
Thanks to you I can use it without problems.
Disadvantages are heavy.
View detail
Although it ran the dry riverbed, it is safe even if a stone hits. It can play thoroughly, without caring about the stepping stone.
Although it ran the dry riverbed, it is safe even if a stone hits.
It can play thoroughly, without caring about the
stepping stone.
View detail
[Webike Monitor] It is the Items which purchased CRF 250L and was attached first. Although the Guard is once attached to the new car under the Engine, I think that does it bound and a hole will open a stone if a path through a wood is run in
[Webike Monitor] It is the Items which purchased
CRF 250L and was attached first.
Although the Guard is once attached to the new car under the Engine, I think that does it bound and a hole will open a stone if a path through a wood is run in
present state since it is a resin Parts from a Thailand.
If it is
, however this Guard, such a thing can hardly be found.
form is also large and a Crankcase also keeps it.
Although the Guard of the form was used by other vehicle types before
, while not knowing, it is deleted with the stone here and there.
It will be indispensable if a path through a wood is run.
It is the impression to which attachment of the Bolt by the side of the rear could not work easily due to
attachment.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
It attached simultaneously with car-body purchase for the path-through-a-wood run. Thickness is also enough and there is that's right with durability. Attachment is also easy. By oil's falling in an under guard and becoming dirty, although the
It attached simultaneously with car-body purchase for the path-through-a-wood run.
Thickness is also enough and there is that's right with durability.
Attachment is also easy.
By oil's falling in an under guard and becoming dirty, although there is a hole for an oil drain, since that is right, after all, it removes each time and is changing the oil.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
WR250R is equipped. A path-through-a-wood attack does not start that there is this [ no ]!? Although it worried with other manufacturers, it determined by cost and board thickness (4 mm). Accuracy of dimension is also good and attachment was easy.
WR250R is equipped.
A path-through-a-wood attack does not start that there is this [ no ]!? Although it worried with other manufacturers, it determined by cost and board thickness (4 mm).
Accuracy of dimension is also good and attachment was easy.
Although a motorcycle becomes heavy, it is important dignity in order to protect a motorcycle with itself.
The tape made from a heatproof is stretched inside in the measure against echo sound.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Attachment is bolt-on, and if there is 15 part as for one-person work, it will be completed altogether. It was enough, and it came to be able to carry out the path-through-a-wood attack also of thickness and the protect range in comfort.
Attachment is bolt-on, and if there is 15 part as for one-person work, it will be completed altogether.
It was enough, and it came to be able to carry out the path-through-a-wood attack also of thickness and the protect range in comfort.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
[Buying motive] Although the under guard authentic positive in a manufacturer was also examined, it was a fault that an under guard must be desorbed to the degree of an oil change. Since this under guard had a round hole in the drain hole portion of o
[Buying motive] Although the under guard authentic positive in a manufacturer was also examined, it was a fault that an under guard must be desorbed to the degree of an oil change.
Since this under guard had a round hole in the drain hole portion of oil, one possible equip was needed for mind (since the oil has not been changed yet after purchase, it is unknown whether it can do without soiling an under guard).
since the board thickness of an under guard is moreover no less than 4 mm, the stepping stone to the engine lower part and the defense at the time of bad road running come out highly, and can run in comfort.
[Attachment] It is with an exclusive design and a feeling of a fit to a car body is perfect.
It is the easy work which binds an attached bolt tight into the nut portion for attachment in a car body.
However, it is with the attachment to the car-body lower part, and working efficiency is not so good.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
The aluminum under guard had equipped with needlessness and the skid plate made of resin of the certain S company until it appeared in the race by this machine, but if the crevice between it and a frame carries out lift up by maintenance greatly, it will
The aluminum under guard had equipped with needlessness and the skid plate made of resin of the certain S company until it appeared in the race by this machine, but if the crevice between it and a frame carries out lift up by maintenance greatly, it will surely be distorted.
The product made from a pure y's gear seems to be expensive, and truly seems to be heavy.
Then, what was found is this product.
A price is also reasonable and light.
Right and left demount the white engine guard made of resin of normal in wearing, and it fixes to it by four 4M hexagons.
The lug of right and left was also lost and the circumference of an engine became a sharp impression.
Moreover, a delightful excellent piece can access an oil drain bolt, without removing a guard.
It already cannot but appear in a race now!? --.
View detail