Reviews
It is highly appreciated that it is easy to operate the Switch and other devices even with the device attached.
I was using an inexpensive Handlebar Cover, but I was dissatisfied with the difficulty of operating switches ….
We decided to replace it with this product.
The operation of switches is smooth without any discomfort, and I liked it at first sight.
The key to this is good wind storm and heat retention, and the performance is so good that summer gloves are not a problem even in December temperatures of 10 to 15°C.
It is going to be essential Items in the winter season.
View detail
To combat the cold.
Used for cold weather.
It prevents your hands from getting cold from Lever.
View detail
Fee Ring good!
*Motivation to purchase
The rattles on the top and bottom of the lever became too large, and it started to interfere with the gripping motion.
When the lever is fully gripped, the lever hits the finger holding the grip, making it impossible to operate the clutch delicately.
0Because the brake lever was broken due to a fall.
Installation
Simply use 0OEMBolt to replace the levers.
0 Nothing special was done. We just applied Grease at the time of installation.
Current state
0After replacement, there's a lot less rattling than with the OEM!
0The fee rings when gripping have also improved very much.
The Brake lever is equipped with an Adjust Screw, which allows for subtle adjustment of the lever position at the rider's convenience.
Effects
I like the look and feel of the Race ish because it's shorter than the 0OEM Lever!
Brake lever and clutch lever are non-slip. (0-type Dent processing) The fee ring is very good because there is very little slipping sensation when you grip it, and you can feel the force of your grip being directly transmitted to the lever!
The 0Clutch, in particular, can be gripped all the way to the end without the lever end hitting the finger gripping the grip, so I feel that accurate clutch operation is now possible, especially when using 1 pc finger operation.
0To use an actual driving example, the front up clutch operation when going over logs has become very direct and timing has become easier to grasp.
The position of the brake lever can be adjusted so that it can be changed individually for multiple riders, allowing for a more subtle rider feel.
View detail
Very effective and good
It's the best Cover I've ever used, easy to get in and out of the hand, although it would be great if the fingertips were improved. View detail
It keeps out the cold.
It will keep your hands much colder in the winter.
I highly recommend it.
View detail
If you don't care about its appearance, it is usable enough.
First of all, when installing the cover, the hole was too small for SR400, and the cover could not be inserted unless the hole was widened with scissors.
Once the Cover was in place, all that was left was to fix it to Mirror using Magic tape, so installation was easier than expected.
The feeling is that when you put your hand in the Cover, it is no problem with thin gloves, but with thick gloves it is difficult to put your hand in, so it takes some ingenuity and getting used to.
It is slightly snug, but it still blocks most of the wind, so thicker Gloves will not make you feel cold.
In my opinion, it works quite a bit better than it looks. I am glad I bought it. Now I wonder how durable it will be.
View detail
Hand warmer
It is easy to put on and operate around the Switch without being affected by wind, and it is also easy to remove, making it the perfect Items for the winter season. View detail
Spacious and roomy Size
It is easy to use with Large Size.
I used to be forced to wear a LEAD Industries square, and I had a hard time just getting the blinker out because my thumb couldn't reach it, but I had given up on that. This time, I decided to look for a big one from Size (while enduring the treatment as an old man from those around me lol).
Blinker is now roomy. All switches can be operated inside the Warmer, even the Option OEM fog Lamp switch (which is positioned fairly centrally) is Large and sturdy, the Brake & Clutch lever fits perfectly, and the Handlebar can be fully locked (this is somewhat of an installation issue). (It may depend on how you use it). It is easy to put your hand in and out, and I think the wind protection is perfect. I have not used it in the rain yet, but I am glad to hear that it has a simple waterproof specification.
I thought it would be difficult to install the FoldFold because there were 4 FoldFolds on one side, but the manufacturer uploaded an instructional video of a similar warmer, so I watched it once and then just did it as I felt like. It worked. However, the Fluid Tanks of the Clutch and Front brake are completely hidden.
I'll leave aside those who say, "Why would you put a cheap Warmer on a BMW in the first place?
View detail
Thank you for your help.
I use a motorcycle for commuting. I used to wear a thin pair of Breath Thermo gloves inside my winter gloves, but since I use 12km of highway in a 30km distance, it was getting to me! 。 I was concerned about the stylishness of the product, so I thought I would at least get the Knuckle guardDemonstration, but I bought this product for practical use. 。 I can control the blinker and other functions inside. I think it would be more comfortable if I added a HandlebarWarmer to the car, but since it is an old car, I haven't thought about the load on the battery. 。 I really hope that some manufacturer will develop a warmer that can be supplied via USB. Anyway, thank you for your help. View detail
Winter handlebar cover
The model I chose has a carbon fiber texture, as you can see from the photo. The size is relatively moderate, and it is easier to install. The size of the hand in and out port is also relatively moderate, which is convenient for hand in and out. This is actually very important, because in the process of cycling in winter, it is inevitable to open and close the helmet mask by hand, especially when waiting for traffic lights. ---------------------------------------------- I chose this section of carbon fiber lines, and should be able to see from the photographs come. Relatively modest size, the installation is also more convenient. The size of hand and out of the mouth is relatively modest, easily reaches into and out. In fact, this is very important, because in the winter of cycling, but it is still inevitably a hand to open and close the mask helmet, especially when the traffic lights. Powered by Google Translator View detail
Fits: SUZUKI Jebel 250XC, SUZUKI DR250R, SUZUKI DR-Z400S, SUZUKI DR-Z400SM, SUZUKI DR250R, SUZUKI DR-Z400S, SUZUKI DR-Z400SM
This is the Lever for Off-road riders.
This is a classic now. View detail
I use it to commute to work.
I bought it because I couldn't stand the cold with only Grip heater. As a result, I'm glad I bought it.
No wind at all, plus the heat from the Grip heater makes my hands very warm.
The disadvantage is that the old man feeling comes out. If you use it for the commuter issue, it is all right.
View detail
Fits: KAWASAKI KDX250SR, KAWASAKI KX80/II, KAWASAKI KDX200R (for competition), KAWASAKI KX80/II, KAWASAKI KDX200R (for competition)
If the OEM is out of production, there's Replacement.
The parts for these parts are over 20 years old and are no longer manufactured by the OEM manufacturers. Some PartsManufacturers may have weak materials, poor finishes, or cheap plating, but the Rough & Amp;Road products are acceptable to me, so I use them without worry. View detail
Function over appearance
Cold hands are a pain in winter touring, so we have a Grip heater, electric heat Gloves, etc . I wasn't sure, but I went with the cheap and warm Hand warmer because it's only available in the winter
It may look dull on the outside, but it's all about function (Lol)
View detail
Looking forward to the upcoming season!
I bought it because I thought it would work well in the cold months ahead
I was torn between Grip heater and electric heat Gloves, but both are pricey Hand warmer
The price is reasonable and I would like to use it with the Winter Gloves
View detail
TripleGuard in hand
As a measure against cold weather around the Handlebar in commuter vehicles
I've been using Laphro's HOTHand warmer for a few years now and the surface has become ragged, so I repurchased it I did
Mounting Point:Make sure the Hand warmer does not press the Brake lever with wind pressure It is installed on top of the Knuckle guard
Wearing comfort:OK to about 5 degrees Celsius when used with Uinta Gloves
If installed carefully, there is little or no wind or rain penetration
Switch handling around the Handlebar takes some getting used to
At about 0 degrees Celsius, without a heat source, my fingertips are cold
Therefore, the Hot grip and Knuckle guard + Hand warmer TripleGuard
In the normal 3SeasonGloves will be between warm to hot
View detail
Easy to install, easy to reach, and good drainage
The Knuckle guard on off-road vehicles can be installed as it is and can be used for hand in/out and SW operation There is no major problem in the
We haven't reached the middle of winter yet, so the effectiveness of the winter protection is unknown
It would have been even better if there was a strap inside to hold it in place so it doesn't move back and forth
It is even better if there is a simple structure to close the mouth to prevent water from entering
View detail
It is easy to install.
The first Handlebar Cover on CROSS CUB
It's magic tape so it's easy to install
It is a little more expensive than the other ones, but it doesn't seem to have any color ache
View detail
Warmth and wind protection performance beyond Winter Gloves that costs even 10,000 yen
Handlebar Cover Total Quantity inside and outside the inside : 1 Set of 4pcs. Hot Hand warmer sticks, it always hits the hand while driving, it is warmest.
I do not grasp Clutch lever arbitrarily by the influence of wind pressure
View detail
I put hand guard on.
This time I bought both Rough AndRoad with Komine. For rough AndRoad, even if the hand guard is arriving, it is easy to add a point, Komine seems to be attached. The warmest thing, the difference is nothing but rough AndRoad is warmer. If the budget permits, I think that rough AndRoad is better. I thought it would be faster to attach. View detail