Reviews
Used for DT50Mirror BracketBoots.
I replaced the MirrorBoots on my DT50 because they had deteriorated. To replace the MirrorBoots, remove the screws from the MirrorBoots, remove the MirrorBoots, and install the MirrorBoots. View detail
It is highly appreciated that it is easy to operate the Switch and other devices even with the device attached.
I was using an inexpensive Handlebar Cover, but I was dissatisfied with the difficulty of operating switches ….
We decided to replace it with this product.
The operation of switches is smooth without any discomfort, and I liked it at first sight.
The key to this is good wind storm and heat retention, and the performance is so good that summer gloves are not a problem even in December temperatures of 10 to 15°C.
It is going to be essential Items in the winter season.
View detail
Convenient for long touring
The large size is just right and eases the fatigue of long touring. View detail
brand items
Throttle assist is installed on most of the motorcycles I own, and it is very useful for large motorcycles to reduce fatigue when touring. It may take some getting used to, but you will soon get used to it. when adjusting the throttle assist, turn the Axel to the closed position. View detail
Great for touring. Try a few different positions on the bar in a parking lot before you take it out
I've used a few variations of throttle assist grips over the years and so far this has been my personal favorite. The full palm grip doesn't make a huge difference but it gives you a bit more feel than some of the smaller surface area grips out there.They all work but for a few extra bucks I personally prefer having more surface area under my hand to work with to control my throttle.This little price of plastic has made long trips a helluva lot less taxing on my wrist and the occasional numbness is pretty much gone. You just let your hand rest on it and it keeps the throttle where you need it. DO take your time getting the angle on this thing EXACTLY where you want it and ride it around a parking lot a few times before you get out into traffic. I almost pitched my bike up into a wheelie the first time I tried it out. You want it angled just slightly up from where your hand rests on the handlebars. View detail
To combat the cold.
Used for cold weather.
It prevents your hands from getting cold from Lever.
View detail
Fee Ring good!
*Motivation to purchase
The rattles on the top and bottom of the lever became too large, and it started to interfere with the gripping motion.
When the lever is fully gripped, the lever hits the finger holding the grip, making it impossible to operate the clutch delicately.
0Because the brake lever was broken due to a fall.
Installation
Simply use 0OEMBolt to replace the levers.
0 Nothing special was done. We just applied Grease at the time of installation.
Current state
0After replacement, there's a lot less rattling than with the OEM!
0The fee rings when gripping have also improved very much.
The Brake lever is equipped with an Adjust Screw, which allows for subtle adjustment of the lever position at the rider's convenience.
Effects
I like the look and feel of the Race ish because it's shorter than the 0OEM Lever!
Brake lever and clutch lever are non-slip. (0-type Dent processing) The fee ring is very good because there is very little slipping sensation when you grip it, and you can feel the force of your grip being directly transmitted to the lever!
The 0Clutch, in particular, can be gripped all the way to the end without the lever end hitting the finger gripping the grip, so I feel that accurate clutch operation is now possible, especially when using 1 pc finger operation.
0To use an actual driving example, the front up clutch operation when going over logs has become very direct and timing has become easier to grasp.
The position of the brake lever can be adjusted so that it can be changed individually for multiple riders, allowing for a more subtle rider feel.
View detail
Very effective and good
It's the best Cover I've ever used, easy to get in and out of the hand, although it would be great if the fingertips were improved. View detail
It keeps out the cold.
It will keep your hands much colder in the winter.
I highly recommend it.
View detail
Off-road standard
Quantity to CT110 HUNTER CUBCT125:Pair (for Left and Right) Installed at the same time.
I am used to it because I have it on my SEROW and it is very convenient and easy to fold up.
It takes some time to adjust the firmness when installing it if you are not used to it, but once you understand the structure, you can freely adjust the angle.
Mirror can be folded for convenient and unobstructed parking in narrow bicycle parking lots.
View detail
If you don't care about its appearance, it is usable enough.
First of all, when installing the cover, the hole was too small for SR400, and the cover could not be inserted unless the hole was widened with scissors.
Once the Cover was in place, all that was left was to fix it to Mirror using Magic tape, so installation was easier than expected.
The feeling is that when you put your hand in the Cover, it is no problem with thin gloves, but with thick gloves it is difficult to put your hand in, so it takes some ingenuity and getting used to.
It is slightly snug, but it still blocks most of the wind, so thicker Gloves will not make you feel cold.
In my opinion, it works quite a bit better than it looks. I am glad I bought it. Now I wonder how durable it will be.
View detail
Not like the cheap stuff.
Vehicle:Ninja 250 (JBK-EX250L)
Grip:Endurance Grip heaterHG115 (Grip diameter 34Φ)
Inexpensive ones are available for about 500-700 yen, but they are not as strong as this product and will crack and become unusable after several uses (or at worst the first use).
However, this product has high strength and high quality, so it can be used for a long time without replacement, resulting in better cost performance.
(although 1,320 yen is hard to come by when there are less expensive ones out there...)
As for the effects, high speed cruising became easier and fatigue was reduced.
It was also made in Canada. （It was made in Canada, which is very rare.)
View detail
Hand warmer
It is easy to put on and operate around the Switch without being affected by wind, and it is also easy to remove, making it the perfect Items for the winter season. View detail
[buying motive] The product ] which was seen as the candidate besides [point which got interested] [, [after-use comment], [comprehensive evaluation]
[buying motive] The product ] which was seen as the candidate besides [point which got interested] [, [after-use comment], [comprehensive evaluation] View detail
light
It is light and good because it is the smallest necessary large size and function.
When used Off, the vibration is Large, so the Mirror must be firmly secured in place to prevent it from moving.
The universal joint got stuck.
Merit with moving parts is lost.
It will depend on how it is used, but it will require some ingenuity.
The quality is pricey, but there is nothing particularly wrong with it.
View detail
Spacious and roomy Size
It is easy to use with Large Size.
I used to be forced to wear a LEAD Industries square, and I had a hard time just getting the blinker out because my thumb couldn't reach it, but I had given up on that. This time, I decided to look for a big one from Size (while enduring the treatment as an old man from those around me lol).
Blinker is now roomy. All switches can be operated inside the Warmer, even the Option OEM fog Lamp switch (which is positioned fairly centrally) is Large and sturdy, the Brake & Clutch lever fits perfectly, and the Handlebar can be fully locked (this is somewhat of an installation issue). (It may depend on how you use it). It is easy to put your hand in and out, and I think the wind protection is perfect. I have not used it in the rain yet, but I am glad to hear that it has a simple waterproof specification.
I thought it would be difficult to install the FoldFold because there were 4 FoldFolds on one side, but the manufacturer uploaded an instructional video of a similar warmer, so I watched it once and then just did it as I felt like. It worked. However, the Fluid Tanks of the Clutch and Front brake are completely hidden.
I'll leave aside those who say, "Why would you put a cheap Warmer on a BMW in the first place?
View detail
Thank you for your help.
I use a motorcycle for commuting. I used to wear a thin pair of Breath Thermo gloves inside my winter gloves, but since I use 12km of highway in a 30km distance, it was getting to me! 。 I was concerned about the stylishness of the product, so I thought I would at least get the Knuckle guardDemonstration, but I bought this product for practical use. 。 I can control the blinker and other functions inside. I think it would be more comfortable if I added a HandlebarWarmer to the car, but since it is an old car, I haven't thought about the load on the battery. 。 I really hope that some manufacturer will develop a warmer that can be supplied via USB. Anyway, thank you for your help. View detail
I was looking for them.
I was looking for a replacement part because the Rubber part had deteriorated. I was able to replace it at a reasonable price. The shipping was inexpensive and it arrived quickly. Thank you very much. View detail
A must for long distance TouringRider ^ ^.
I remembered that the fatigue feeling of the wrist was not half done by doing Throttle operation for a long time at the time of long-distance touring, and I bought it ^ ^.
It is very easy to install. Elastic band to prevent slipping (about 25mm wide) to dive into the Axel end, and then simply fit the AssistThrottleBody to the Elastic band.
There is no screw stop, so it is easy to remove.
Throttle opening can be easily adjusted.
View detail
Throttle auxiliary board
I bought the accelerator board on webike, and I tried it, but it was a good thing. It was thick, and the hand was much easier than before. The open road can be lightly pressed with the palm of the hand. It has no burrs and is very smooth. Good quality and low price, the appearance is relatively simple, not easy to be outdated, and easy to install. It used to require a very laborious twist on the accelerator. This is better, it is less laborious, and there is no need to become an iron arm. For knights, especially long-distance knights, it should be more needed. The gas pedal I bought on the Webike, I tried it, but it's a good thing, it's thick, hands are much lighter than before, the open road can be pressed gently by the palm, no rough edges, very smooth, good price, and it's simple in appearance, it's not easy to go out of style, it's easy to install. Used to need the hand very laborious screw throttle, this is good, saves the strength, does not need to become the iron arm, regarding the Knight , especially the long-distance Knight, should be quite needs. ------------------------------------- --------- The gas pedal I bought on the Webike, I tried it, but it's a good thing, it's thick, hands are much lighter than before, the open road can be pressed gently by the palm, no rough edges, very smooth, good price, and it's simple in appearance, it's not easy to go out of style, it's easy to install. Used to need the hand very laborious screw throttle, this is good, saves the strength, does not need to become the iron arm, regarding the Knight, esp ecially the long-distance Knight, should be quite needs. Powered by Google Translator View detail