Reviews
Although there is a high degree of freedom
The flexibility is high, but the number of mechanisms is large, so it can be a bit of a challenge to install without thinking about it.
Texture was appropriate for the price, and visibility was not much different from OEM.
With a single cylinder, there is a certain amount of vibration.
The hardness of the moving parts can be adjusted by you, giving you peace of mind.
View detail
Good vibes
It is a little difficult to adjust the movement, but I am satisfied. View detail
Mirror, the standard for off-road vehicles
I have been using it for many years on my off-road vehicle, and if you grease up the universal joints and retighten the nut regularly, it will last for a long time. The Image is a long-established product from RoughAndRoad.
Vehicle:2022 RIEJU MR250 Racing
View detail
Fits: SUZUKI Jebel 250XC, SUZUKI DR250R, SUZUKI DR-Z400S, SUZUKI DR-Z400SM, SUZUKI DR250R, SUZUKI DR-Z400S, SUZUKI DR-Z400SM
Very easy to use and good looking, but...
The shape is good and easy to use. However...I have trusted this manufacturer's parts, but unfortunately, this one is not good enough. No matter how good it looks and feels, there is a safety issue. As others have posted, the positional relationship with the brake switch is different from the original, and even if the brake lever is not pulled, the switch is open, so it is misrecognized as brake activation and the stop-lamp is left on. This will not pass vehicle inspections and cannot be driven on public roads. This is a problem that can be solved by adding fat in the car by using a fat controller or a metal lock, but I am sorry to say that ROUGH & ROAD is no better than many other manufacturers of parts with inferior modifications. It's a shame that this part is as bad as many other poorly modified parts manufacturers. It's been a long time since it was released, but I doubt the manufacturer's attitude if they haven't even fixed this important problem. Other Material:I have used AluminumCarrier and other manufacturers and like them, so I expect good designs from them in the future. View detail
Fits White Motorcycle
It fits my White Motorcycle. Before purchasing this product, I was afraid that my fingers might get frostbite, but I am satisfied with this product. As for the operability, in the case of the Rebel, the switch on the RightHandlebar is operated to turn on the emergency stop light, but I can't see inside so it is a little difficult to operate, so I gave it 4 stars. I have not used it in the rain yet, so I don't know, but I thought it was a good product for protection against the cold. View detail
Windproof performance is high, but WaterproofRib is tight
Mounted on SEROW250 over ZETA's ArmourGuard.
Although a slight draft enters, the windproof performance is high because it fits completely up to the wrists.
Although the opening is Large, the waterproof rib is Small, and it is in the way when inserting/removing hands or operating the blinker.
View detail
A little hard
It is easy to install. and good, but I would like to improve the area around the Brake lever, it feels like my fingertips are jammed, it is comfortable and works well with the Grip heater. View detail
Recommendation for TRAIL vehicles
It can be installed over the Handlebar Guard of TRAIL vehicles, and because of this, the Cover is not affected by wind pressure and has a spacious interior, so we recommend that you hardly feel any discomfort in lever operation. View detail
There is only a bestseller, on a cinch, a visual field is also large and the price of a retractable type, 3D, and a function surface is also cheap. Is only the increase of weight a difficulty?
There is only a bestseller, on a cinch, a visual field is also large and the price of a retractable type, 3D, and a function surface is also cheap.
Is only the increase of weight a difficulty?
View detail
Waterproof effect exceeded my expectations.
I used it every day for one season while commuting and touring, and it is durable enough to last for the next season.
The windproof and coldproof effect is just as you say, and this alone is indeed not enough to survive midwinter.
Use a hand warmer or a Grip heater as it gets tighter after hours of riding.
There was a time when I left my bicycle in the company's parking lot out of the rain, and the waterproof effect is quite good.
Note that the Accessory Case portion is not waterproof.
While it was easy to install, it lacked stability and I was concerned about wobble.
Also, I have a sensation that the wind is holding my hand down from about 80?
If a hand guard is attached, I think the above two can be improved at the same time.
I'm glad I bought it because it didn't look as bad as I thought it would look on my V-Strom 650.
I will use it again next Season!
View detail
Hand warmer
It was warm and very useful. View detail
The effect of reducing fatigue when driving on highways is Large. Not recommendation for use on public roads.
Purchased as a measure to alleviate wrist pain twisting the Axel when using the highway on long distance touring.
Installation is simply by screwing it into the Axel.
When using the Axel, place the base of the thumb on the plastic plate of the product and push it in to open the Axel.
The principle is simple and straightforward, but who knew that just not holding the Axel would make highway driving so much easier! I feel that it is.
On the other hand, the fine control of Axel is completely disabled, and I do not recommend using it in traffic jams or on public roads. I think there is a high risk of mishandling and rear-end collision.
This is not a defect of the product. and install and remove it each time.
View detail
A necessity on the highway.
The cosmetics are very good. I use it every time I drive at high speed. View detail
Adventure will look good.
[How is it used?
1 hour commute on the highway. A little touring.
Was the one you received as per Image?
Yes, as per Image.
How was your experience with it?
until now You look like an old man. I had never used it before because I thought it was too expensive, but now that I'm really an old man, I gave it a try. I regretted why I didn't use it earlier. There are many mistakes in life.
Even in the middle of winter (about 5 degrees Celsius), you can go fast for an hour without a grip heater, and even summer gloves are large and sturdy. This is amazing.
It's like a lie that I used to be so cold and rattled with pain in my fingers even when I used to wear tough winter gloves (which I don't like much because of their poor operability). Young people, let's be old men.
Strangely enough, V-strom has You smell like an old man. I can't see it, maybe Off cars in general have an affinity for it. I'm sure the SS will be uncomfortable, though.
[Points to note]
The V-Strom has a hand guard, so it's not a problem, but the wind pressure may push the lever.
Also, because of the hand guard mentioned above, I tend to be a little forward and can only get my hands in shallow.
It is a bit of a hindrance when operating the Blinker. You have to use a little force to operate it.
I would give it a Minus star.
This is not a problem specific to this product, but please be careful when you are not used to it.
View detail
Mirror that can be folded from the root
Required Tools
Installation 17Spanner×2, Phillips Screwdriver
OEM Removal 14Spanner×2
crf250 is Quantity:Pair (for Left and Right) Both are Normal Thread ScrewM10.
It is wider in height than OEMMirror.
In contrast, the width is narrow.
It can be folded inside without tools, which is convenient for people who go off-road.
However, it can be easily displaced by the impact of snatching it from the street tree.
It shifts easily and can be easily put back on.
When I was standing in the parking lot of Convenience, the Mirror didn't bend and crushed, but it never cracked in Off-road.
Also, the one I used for about 3 years broke off from the root.
It looks like the Mirror that I folded when I fell got caught in the Rider that blew up and broke.
View detail
It is used in SEROW250.
I bought this to make me comfortable in the winter.
I'm going to use it with the Grip heater so I can say goodbye to freezing fingertips.
View detail
Fits: SUZUKI Jebel 250XC, SUZUKI DR250R, SUZUKI DR-Z400S, SUZUKI DR-Z400SM, SUZUKI DR250R, SUZUKI DR-Z400S, SUZUKI DR-Z400SM
Not too long, not too short, just right.
Replaced OEMLever because my hands are too small.
Lever to the machined part of the fingerQuantity:2pc is applied firmly, and operability has been improved.
One thing I regret is that there is not enough input for the brake switch, so if you put it on as it is, the stop-lamp will stay on.
So I added a rubber cap to the part that contacts the brake switch to increase the contact area.
I think it can be done by amateur maintenance, so I think it is Large sturdy if you only take care of that point.
View detail
Use Miscellaneous
I installed it on my V-strom 650 because my fingers freeze in the dead of winter.
Installation took 10 minutes and was easy.
It was over the OEMHand guard and it fit perfectly!
Driving Impressions
Even when the temperature was below 5 degrees in Large Kanzan, the gloves were JRP GHW and Large sturdy.
weakness
This may be a problem only with the V-strom 650, but due to the switch position, Hazard
It is difficult to produce a
Conclusion.
It will be essential in the middle of winter in the future.
It's a great product with a great balance of firmness and softness.
One thing that worries me is the fluttering of the doorways, this is where ease of driving and barter
Maybe, but I have a feeling it's going to wear out a little fast.
View detail
My body couldn't run anymore without it.
I used it the other day for an overnight tour from Kanagawa to Toyama.
The vehicle is equipped with a VFR800X.
It was under 10 degrees in the mountains during the day and in the morning the temperature was already 4 degrees or so. I used this in combination with the OEM Grip heater and it was really comfortable. It was really comfortable.
Without it, you need to put on the thicker Gloves, but it is hard to handle this Large body on the tight mountain roads.
This allows you to take full advantage of the Heater's performance and the thin Gloves are fine, so it doesn't compromise the ease of operation.
View detail
Large activity in the middle of winter
The RightBrake has been replaced with radial master and the Knuckle guard can be installed by changing the position of the Knuckle guard.
You can easily remove it when it gets hot. However, it shifts in front of me while I'm using it, so I made a hole in the front and fixed it to the Knuckle guard with a few screws. I would give it 5 stars if the Magic Tape is attached to the Knuckle Guard. But there is a possibility of leaking because I made a hole in front of it.
Essential winter touring items for Off and Adventure. (personal touch)
View detail