Reviews
Fits: SUZUKI DL1000 V-STROM650, SUZUKI BOULEVARDM95(MARAUDER1600,VZ1600), SUZUKI BOULEVARDM95(MARAUDER1600,VZ1600), SUZUKI BOULEVARDM50(INTRUDERM800/VZ800), SUZUKI BOULEVARDM50(INTRUDERM800/VZ800), SUZUKI BOULEVARDM109R (M1800R INTRUDER/VZr1800), SUZUKI BOULEVARDM50(INTRUDERM800/VZ800), SUZUKI BOULEVARDC50(Intruder Classic800/C800)(VL800), SUZUKI BOULEVARDC50(Intruder Classic800/C800)(VL800), SUZUKI BOULEVARD400, SUZUKI BOULEVARD M90(INTRUDER M1500), SUZUKI BOULEVARD C90(INTRUDER LC,INTRUDER C1500,VL1500), SUZUKI DESPELADO800(MARAUDER800/VZ800), SUZUKI DESPELADO /X (96 - 97), SUZUKI GLADIUS650400, SUZUKI SKYWAVE400 burgman, SUZUKI INAZUMA750(GSX750), SUZUKI Intruder Classic (01 - 10), SUZUKI GLADIUS650650, SUZUKI DL1000 V-STROM650
858 and 859 for V str 650.
The OEM pad on the V-Stroke was not very good, squeaking and slipping, so I quickly replaced it.
The rating is normal because it has just been installed and has not been run yet.
I was torn between sbs and Mega alloy, but I chose Mega alloy because I had a good feeling about RKJapan's Fine alloy when I used it on my moped.
I see that the Pad surface is slippery. It seems to work well.
What bothered me the most was that the OEM Fluid was already stuck in place after less than a year.
That being said, I installed it with Plate for now to stop the crying. I am looking forward to going for the next run!
View detail
Fits: HONDA CB500X, HONDA CBR500R, TRIUMPH TIGER XCR (15 - 16), TRIUMPH TIGER XCA (15 - 16), TRIUMPH Thruxton, TRIUMPH Thruxton, TRIUMPH Thruxton, TRIUMPH TIGER, TRIUMPH TIGER, TRIUMPH TIGER, TRIUMPH TIGER, TRIUMPH TIGER, TRIUMPH THUNDERBIRD, TRIUMPH THUNDERBIRD, TRIUMPH THUNDERBIRD SPORTS, TRIUMPH THUNDERBIRD SPORTS, TRIUMPH STREET TRIPLE, TRIUMPH SPEED MASTER, TRIUMPH SPEED MASTER, TRIUMPH SCRAMBLER
I'm going to undress you.
The only complaint I have with the Daytona Goldenx is that it's too thin and the instructions say to put a shim on it. After a few hundred kilometers and full breaking from full throttle, it was as good as OEM. View detail
Fits: HONDA CBR929RRFire blade, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZ1FAZER, YAMAHA FZ1, SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1000, SUZUKI SV1000S, SUZUKI GSR750
Used for 4c8R1
I changed from OEM and did not notice any difference in Touch. However, it is cheaper than OEM, so I recommend it! View detail
Fits: SUZUKI GF250, SUZUKI GF250, KAWASAKI ZZR1200, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZXR400R, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZX-7R, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, SUZUKI GS250FW, SUZUKI GS250FW
Not as good as expected?
Mega alloy (M) Before using DAYTONA Hyper Sintered Pads (H) and this is a comparison with that.
When I was using H, I could not jackknife even with four fingers.
M is for 4-finger hanging (Quantity:2PCs are not possible), then you can use a little more. (about 10???) Even at Downhill, my fingers were Large sturdy.
That is the extent of its effectiveness.
Well, it's an off-road vehicle, so it's a bit of a mystery how the Dirt can control it if it works so ridiculously well. (^_^;)
Large premise is that the rider's skill is insufficient and the MASTER has been OH'd several times, but the Caliper has been serviced only to fir and grease up for 20 years since it was new. (Lol)
Durability
M at 10,500 km traveled (Still in use) and 2mm remaining.
Approx. 5000km/1mm
I don't know about H because I stopped using it in the middle of the project.
View detail
Fits: DERBI Mulhacen125, DERBI Terra125, DERBI CROSSCity 125 (07 - 14), HONDA CRF250L, HONDA CRF250M
Fits WR155
It is not officially released by Manufacturer, but it fits the WR155.
Bessura's website lists VD-181JL as an official fit.
I think the Pad that fits the CRF250L will fit the WR.
Please do so at your own risk.
View detail
Fits: SUZUKI B-KING, SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It's neither good nor bad
In my riding style, I only use the rear brake for speed adjustment, so I don't care if it works normally and has good control. So I thought this Pad is the right answer. View detail
Fits: KAWASAKI ZR-7/S, KAWASAKI Z750S (water-cooled), KAWASAKI GPz1100, KAWASAKI ER-6n, KAWASAKI ER-6n, KAWASAKI ER-6f, SUZUKI DL1000 V-STROM650, KAWASAKI VULCAN900Custom, KAWASAKI VULCAN800 CLASSIC, KAWASAKI VULCAN400, KAWASAKI VULCAN1500, KAWASAKI VULCAN1600Nomad, KAWASAKI VULCAN1500 Classic tourer, KAWASAKI VULCAN1500 Classic, KAWASAKI VULCAN1500 Classic, KAWASAKI NINJA650R, KAWASAKI VULCAN400 1700 Nomad (12 - 16), KAWASAKI NINJA400R (-2013), KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750
RK Mega alloyBrake Pads
I installed it on my ZEPHYR1100 which has a heavy body. I think Brake is good for the price. View detail
Fits: HONDA CB500X, HONDA CBR500R, TRIUMPH TIGER XCR (15 - 16), TRIUMPH TIGER XCA (15 - 16), TRIUMPH Thruxton, TRIUMPH Thruxton, TRIUMPH Thruxton, TRIUMPH TIGER, TRIUMPH TIGER, TRIUMPH TIGER, TRIUMPH TIGER, TRIUMPH TIGER, TRIUMPH THUNDERBIRD, TRIUMPH THUNDERBIRD, TRIUMPH THUNDERBIRD SPORTS, TRIUMPH THUNDERBIRD SPORTS, TRIUMPH STREET TRIPLE, TRIUMPH SPEED MASTER, TRIUMPH SPEED MASTER, TRIUMPH SCRAMBLER
I think it is a cheap performance.
It is an impression post again because it passed 1000? In the beginning, I felt that the initial touch was milder than the OEM pad and the feeling of linearity was good for the grip. It's not that I'm not comfortable with it, but I can feel the piston in my grip shaking. Could it be the PadMaterial is too soft or the heat sore? I can't use Full Brake safely with this. I can't say for sure because I'm holding off on course practice because of the Corona, but I can't trust the brake to attack the fork. I regret that it is a little bit cheap and cheap performance. I will return to the OEMPad of 3mm and test again. I will not buy this again because Brake and Tire is my life and I will not choose less than OEM next time. View detail
Fits: KAWASAKI 250TR, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ER-6n, KAWASAKI GPz1100, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZR-7/S, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ESTRELLA, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX, KAWASAKI NINJA400R (-2013)
Purchased on the GSR750 for Rear
Personally, I have no complaints. The Mega alloyX seems to have a momentary lapse in the initial braking at the time of breaking, but the purpose of the device is the Rear. So there was no problem there either. View detail
Fits: HONDA CBR929RRFire blade, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZ1FAZER, YAMAHA FZ1, SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1000, SUZUKI SV1000S, SUZUKI GSR750
Cost performance oriented?
I have installed them on my GSR750. I don't have any problem when I use it mainly for commuting or driving through mountain passes, but when I use it for breaking in deep places, I think it has one cushion until it really starts to work rather than putting it on the braking force.
Also, Life is not long enough to take it down, but I love it because I have no complaints about it.
View detail
Fits: KAWASAKI KDX125R, KAWASAKI KDX200SR, KAWASAKI KDX200SR, KAWASAKI KDX220SR, KAWASAKI KDX250SR, KAWASAKI KLX250ES, KAWASAKI KLX250SR, SUZUKI DR250R, SUZUKI DR250S, SUZUKI DR650 SE, SUZUKI RMX250S, SUZUKI RMX250, SUZUKI TS125R, SUZUKI TS200R, SUZUKI DJEBEL250 XC, SUZUKI DJEBEL250, SUZUKI DJEBEL250, YAMAHA DT200WR, YAMAHA TT250R RAID, YAMAHA TT250R
Excellent as a non-working Pad.
This pad is for rear braking, so it won't suddenly become effective if you step on it too much.
I was looking for a loose Pad that works well. Normally I would choose the Resin from Vesla, but it was out of stock and the delivery time was long.
Sintered, but I chose this one. The initial rise in potency is stronger than Resin, but it is acceptable.
And if you step on it, the braking power will stand up in its own way, so once you get used to it, it was not a problem.
It just decreased faster than I expected.
View detail
It should be the same as always.
I usually use this pad when I run MOTARD with KLX.
There is a part number that fits the YZ250F Normal caliper (which is pretty small). I used it because it was there.
As usual, though, the Fee Ring, which is more about control than absolute braking power, is a good example of the
However, the capacity and speed of Caliper are not suitable, and it doesn't stop.
I learned that it is up to Caliper to take advantage of or kill the characteristics of the Pad.
View detail
Fits: HONDA CRF450R, HONDA CRF250X, HONDA CRF250R, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ250, YAMAHA WR250R, YAMAHA WR250F, SUZUKI DJEBEL250, SUZUKI DJEBEL250 XC, SUZUKI RMX250, SUZUKI RMX250S, SUZUKI RM-Z450, SUZUKI RM-Z450, SUZUKI RM-Z450, YAMAHA WR426F, YAMAHA WR450F
What's the texture of the Pad?
It should be stated that the first thing to compare it to the Racing pad is Nan Sense
On top of that, when compared to the OEM mounted pads and the Pads of Others same etc.Rank
The way the potency rises, the response of the potency against the white grip is used for my senses I think it's easy to do
But I think the braking power itself is not so high as I griped, so I use Brake on Hard In a Course like
I think there is a sense of lack of it However, I have no complaint on public roads and it is easy to use in terms of being able to grip it firmly I think it is
View detail
Fits: HONDA CB1000 SF (Big One), HONDA CB1100, HONDA CB1100, HONDA CB1300SUPERTouring, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB750, HONDA CB750, HONDA CBF1000 (06 - 10), HONDA CBF1000F, HONDA CBF600N/S (08 - 14)
Moderate performance
RK's Pad, which I used to use often in the past
The price and performance are just right for Street youth
It is mainly used for adjusting speed on hills and at low speeds, so strong effect is not required No, sir
I think it's an Exactly product in its usage
View detail
Fits: HONDA CB1000R, HONDA CB1000R, HONDA VFR800F, HONDA VFR800F, HONDA VFR1200F, HONDA VFR800XCROSSRUNNER 125, HONDA CB1000R
Life is weak, it may not be suitable for people riding a distance
I used it for the 2014 model Honda VFR 800 F.
Until now OEM → Bella (Since it is a competitor for the time being, it is an apology of the apostasy degree, hereinafter "Be") → I used it with RK.
Perhaps I think I used all Rear Brake Pads that I can use for this vehicle, so I will drop the impression.
Price (To the last with reference price)
OEM : 5600 yen
What : 4900 yen
RK : 5900 yen
☆ Life
OEM : 0~32000?
Baie : 32001~55000? (There was a considerable surplus at the time of replacement)
RK : 55001~72000?
As it is two and a half since the current car purchase, so aged deterioration etc
I do not need to consider it.
☆ Main Route
high speed : Pass : Town ride = 6 : 1 : 3
☆ Drive scratch (?)
OEM> R> RK
☆ Braking fee Ring
Since it is not directly compared, it is essential only
Personally, it is the impression that OEM ≒ B <RK.
In particular, stability at low speed,
I think that the goodness of re action is missing RK one head.
Because it is Tourer to the last
It is moderate braking power.
☆ Summary
Like yourself
To anyone who wants to run long distance anyway
RK can not Recommendation in terms of Life.
Honesty OEM when I was using it was still rough at the pass so I was driving rough,
RK now is using two kinds of local grandfathers riding the local grandfather at the pass and steadily on mini vehicles
Although I'm running as big as I give way
I am surprised at this lifespan.
However, since we think that Fei Ring is very good when behaving at low speed such as UTurn,
I think that it is possible to recommend to Jimka or anyone who likes it.
A little in terms of Life and Cospa
I have dropped the evaluation, but in terms of Fee Ring
I think that I can recommend the most among the three types.
View detail
Fits: HONDA PCX125, HONDA PCX150, HONDA Sh MODE, HONDA ZOOMERX, HONDA DIO(4Cycle), HONDA LEAD110(EX), HONDA LEAD125
It is enough for my own use
Since the mileage of Dio 110 exceeded 13,000 kilos, it was replaced, OEMPad removed 2. It remained about 5.
I think that early Touch is not bad with Fe Ring similar to NORMALPad. Impression that it is more effective than NORMAL, but I think that I have a necessary and sufficient function for commuting Main + occasionally PetitTwo.
I'm still getting used to it so I'd like to report if I've been concerned about including Brake dust and Life.
View detail
Fits: BUELL CYCLONE M2, BUELL FIREBOLT XB12R, BUELL FIREBOLT XB9R, BUELL LIGHTNING X1, BUELL LIGHTNING XB12S, BUELL LIGHTNING XB9S, BUELL S1 WHITE LIGHTNING, BUELL S1, BUELL THUNDERBOLT S3, BUELL X1W WHITE LIGHTNING, HONDA 400X, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CBR250R (2011-)
Buy with Front.
【What made you decide the purchase?】
- Pad purchased together with Manufacturer used for Front.
【How was it actually used?】
- When used for Rear of STREET TRIPLE, it is originally single press single and is sexual power like exclusive for posture control,
Immediately after installation it also feels unnecessary to stop.
When Atari firmly comes out OEM and the like. It seems to be about?
Although Front felt that it was necessary and sufficient for same Pad,
Rear is glad when it personally works a little more.
【Was it difficult to install? (Hard parts case)】
- I think that it is easy for anyone who has the experience of maintaining Brake around.
【Please tell me the point of installation and hang (in the case of Hard parts)】
- Fine Clipetc to hold down Pad. There are unexpectedly many parts, so unless you remember it firmly when you remove it.
When installing position etc. If you forget it, feel good if you can take a picture and check it.
[Is there anything I was disappointed about?]
- nothing special
【Hope for Manufacturer - Please let me know if you have any improvement points]
- nothing special
【Have you compared items?】
- DAYTONA same function item
View detail
Fits: SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI TL1000R, SUZUKI GSX1400, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI GS1200SS, SUZUKI GSX-R1000, KAWASAKI VULCAN1600 VULCAN Mean Streak 1600, KAWASAKI VULCAN1600 VULCAN Mean Streak 1600, KAWASAKI VULCAN1500 VULCAN Mean Streak 1600, KAWASAKI ZX-9R, KAWASAKI ZX-7R, KAWASAKI ZX-6R, KAWASAKI ZX-12R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100
Good vibes
I bought it because it was cheap.
I thought it would work better than OEMPad and purchased it.
Although it does not have special effects, it is easy to control from the hand grip.
View detail
Fits: YAMAHA WR250F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ125, YAMAHA YZ250, YAMAHA WR450F, SUZUKI RM-Z450, SUZUKI RM-Z450, SUZUKI RM-Z250, KAWASAKI KX250F
RKMega alloyxBrake Pads
I bought it for WR 250 x for Rear.
I got lost as DAYTONA's Red Pad, but I purchased it here.
I do not know how effective it is because I have not used it, but I look forward to everyone's impression so it looks pretty good.
It is also attractive that it is cheaper than OEM.
View detail
Fits: HONDA 400X, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB750, HONDA CB750, HONDA CB750F, HONDA CB750F, HONDA CBF1000 (06 - 10), HONDA CBR1000F, HONDA CBR1000F, HONDA CBR250R (2011-), HONDA CBR250R (MC17/19), HONDA CBR250RR (MC22), HONDA CBR300R, HONDA CBR300R, HONDA CBR400R (2013-)
It is the first time for RK
Purchase with doubt about the effectiveness of OEM. Results can be controlled with delicate Touch. After that it is durable. Because the OEM Pad is thick ... I will follow you on how long it wears. View detail