Reviews
Solid construction and no installation problems
The construction is solid, and the mounting hole dimensions are perfect for the vehicle body. Many of the Engine Guard and Pannier Bracket products I have purchased from overseas require modification such as cutting the holes, but this product from Japan did not, and I was able to install it without any worries. However, the weight of the luggage is placed at the very end of the RearSub-frame, so it would be better to avoid using too heavy luggage. View detail
Fits: KAWASAKI GPZ900R NINJA, KAWASAKI GPZ750R, KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI GPZ900R NINJA [Ninja].
I trust them overwhelmingly.
NINJA's Carrier is the only one I use.
I only install it when long touring, but I have never tolove it!
I don't know anything better than this Carrier in terms of rigidity and load capacity.
Recommended for NINJA riders.
View detail
Fits: SUZUKI DR-Z400S, SUZUKI DR-Z400S, SUZUKI DR-Z400S
It attached to DR-Z 400S. [Good point] It seems to be strong. If a color is seen with a carrier simple substance, it is not quite satisfactory, but it is satisfactory if it sees in the state where it attached. A load carrying face product is l
It attached to DR-Z 400S.
[Good point] It seems to be strong.
If a color is seen with a carrier simple substance, it is not quite satisfactory, but it is satisfactory if it sees in the state where it attached.
A load carrying face product is loud.
Pure tool BOKKU is attached.
[Bad point] The shortage of explanation of an instruction manual is worrisome too.
If it often reads, it understands, but I want you to attach a picture.
Why doesn't a maker improve? In the mounting arrangement given in the instruction manual [related with attachment], when the temporary stop was first carried out from the rear side, it was, but when the temporary stop of the rear side was carried out first, the nut by the side of a front did not enter straight, and it was not able to carry out the temporary stop of it.
When carrying out the temporary stop of the front side previously, to the smooth, the rest is attachment and it completed it in about 30 minutes.
Since he thought that it was attached simply when even the manufacturing precision of the carrier was satisfactory, I thought that the design itself was satisfactory.
Since he buys it and thinks that it was good, it is a recommend.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110
Good vibes
I installed it on KSR110 It could be installed on Smooth without Gap of the bolt hole at the time of installation
It looks solid and strong
View detail
Fits: HONDA HORNET600, HONDA HORNET250, HONDA HORNET600 [Hornet]., HONDA HORNET250, HONDA HORNET250
Easy and convenient to install, need more durability
The one thing that is critically lacking in a motorcycle is storage... and the one thing that is expected to make up for it "Carrier It is
I operate with a Top case on it
Reason for the choice
It looked sturdy with a swooshing design and a corner Pipe, the HORNET I felt that they were very careful not to compromise the designability of the product
[Feeling of use]
It's up to par It was matched to body design, and I put a GIVI 37LTop case on it I used it and it never broke or bent
[Durability]
After using it for a few years, the arm part that connects the body of the car rusted and the paint got cracked and flaky It has been detached
Probably the paint cracks when the Arm is deflected by the use of the load-bearing Over, and rainwater gets in through it Rusting...I guess it's like that
【Review】
As long as you use it properly, there are no problems and it fully meets your expectations
In the end, I replaced it with another Carrier due to rusting caused by unreasonable use I preferred this one to the
But why do all the Carriers have a small load capacity of around 3kg? and Top case on it, it's almost overweight
Most of the Carriers are bolted to the Frame, so if you put too much weight on it, you can't use it Is there a possibility of damaging the Frame?
But Carrier is extremely useful Parts, if you have a product to apply to your vehicle Recommendation to try it out
View detail
Well made and reliable
As for the thing, it's very well made, solid and reliable in use However, the bolts and collars for mounting are poor and I had to prepare and install the appropriate ones myself I expect the manufacturer to include parts that are appropriate for the installation structure I want to View detail
Fits: HONDA CB400 R, HONDA CB400 S, HONDA CB400 SF
As expected it is a fully completed product
Cost performance is excellent and I think that it is a fully completed product, but if you mention the drawback, you can not Bolt-on first, it is necessary to machine the car body side.
Also install Grab Bar Bolt (Bolt hole) We will use the Grab Bar will be gone.
- - - As a result, you will lose the OEM Helmet holder on the Grab Bar of Left Side.
The disadvantage of the biggest lot is this. Although it is unavoidable.
I will write a state of detailed installation work on the blog so please refer to it.
http : / / gori-tech. blogspot. jp / 2015 / 04 / cb400sf. html
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110
I attached it to KSR-110
I read other people 's impressions and purchased this item as the best fit.
Because the installation seemed to be a little Large seems to change, I asked for installation to Motorcycle shop who is indebted,
The accuracy was low and it was hard to install.
I am satisfied with Firmly now that installation is complete,
As amateurs seem to be struggling to install, I am deducting one star by one.
I think that it is a good thing if it puts on.
View detail
Fits: YAMAHA SEROW 225 , YAMAHA SEROW 225 W , YAMAHA SEROW 225 WE , YAMAHA serow 225 wwe [serow]., YAMAHA serow 225 w [serow]., YAMAHA serow 225 [serow].
Rear Carrier to SEROWWE
It is heavy because Material is iron. But it seems to be strong. As the dimensions of the details are tight, when installing, it does not fit if you do not understand a bit. What is disappointing is a painting that can not be said as good flattering. Since the film is thin, the paint will be peeled off immediately, so we painted Clear on top. In terms of price, I guess wonder if there is anything wrong..
I think that it was good as it began to accumulate the original purpose baggage.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110
It is firmly fixed to a frame and there is sense of security. It is one star minus by the point that a description is too simple as many users say. Although I'm not sure it may be the problem of a product or the side of a car body, since it could not be a
It is firmly fixed to a frame and there is sense of security. It is one star minus by the point that a description is too simple as many users say. Although I'm not sure it may be the problem of a product or the side of a car body, since it could not be attached as it was, I deleted it and equipped with color. Once it attaches, since the degree of satisfaction is high with the sense of unity with the bearing surface and many hooks, it is recommended. View detail
Fits: HONDA X11, HONDA X11, HONDA X11
If there is time to attach as long as 15 minutes, it will be made. However, if four bolts are not bolted up with a sufficient balance, it may have a close game. It was sold at the twice [ about ] as many price as this although the same carrier was
If there is time to attach as long as 15 minutes, it will be made.
However, if four bolts are not bolted up with a sufficient balance, it may have a close game.
It was sold at the twice [ about ] as many price as this although the same carrier was found in the two-wheel-barrow parts store.
the appearance which is not bad at this price -- it is satisfied.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR1300
It thought that it was indispensable for future time touring, and purchased. Its own car is matched and it is very much satisfied than expected.
It thought that it was indispensable for future time touring, and purchased.
Its own car is matched and it is very much satisfied than expected.
View detail
Fits: KAWASAKI GPZ900R NINJA, KAWASAKI GPZ750R, KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI GPZ900R NINJA [Ninja].
It attached to GPZ900R. It attaches, it is easy, and if it is as long as 5 minutes, it can equip. although the tent, a sleeping-bag, a mat, etc. were stacked in order to go to camping touring -- sense of stability -- it is enough. I think that
It attached to GPZ900R.
It attaches, it is easy, and if it is as long as 5 minutes, it can equip.
although the tent, a sleeping-bag, a mat, etc. were stacked in order to go to camping touring -- sense of stability -- it is enough.
I think that it is tolerable also in price.
View detail
XLR125 was attached and used. In order that a rear carrier might have only this product, it chose inevitably. Structure is solid although there is no special function in particular.
XLR125 was attached and used.
In order that a rear carrier might have only this product, it chose inevitably.
Structure is solid although there is no special function in particular.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR1300
It attached in order to equip with the box of GIVI. Structure is solid and I think that it is the stronger one in the carrier for XJR1300. Merely somewhat heavy one is worrisome. However, a price is cheap compared with the product of the other
It attached in order to equip with the box of GIVI.
Structure is solid and I think that it is the stronger one in the carrier for XJR1300.
Merely somewhat heavy one is worrisome.
However, a price is cheap compared with the product of the other company, and since attachment is also exchanged for an attached bolt and only attaches the bolt of a glove bar, it is recommended ^^
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110
I think that the design of KSR110 is matched. I think that reinforcement is also enough. Since nylon coating is carried out, I think that it is strong also to rust. However, about attachment, since a size did not suit delicately that a drillin
I think that the design of KSR110 is matched.
I think that reinforcement is also enough.
Since nylon coating is carried out, I think that it is strong also to rust.
However, about attachment, since a size did not suit delicately that a drilling process is required, troubles were suffered.
since -- four stars were used.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110
It has attached to KSR110. Those who have ridden on KSR have many people who follow Colet. Although a drilling process is required for a tail cowl, since it is the structure in which uneasiness was lost about the part reinforcement, and the main p
It has attached to KSR110.
Those who have ridden on KSR have many people who follow Colet.
Although a drilling process is required for a tail cowl, since it is the structure in which uneasiness was lost about the part reinforcement, and the main part also became brave, it bends and carries out and does not say relaxedly.
However, although it does not understand whether it is the result of the individual specificity of a thing without quite satisfactory accuracy of structure, and a car body, a hang is necessary for attachment a little.
The part of the difficulties is pointed out and pulled and they are four stars.
View detail
Fits: HONDA CB400 R, HONDA CB400 S, HONDA CB400 SF
Since removal of a cowl was the first, and there was with wearing and the payload of 3 kg somehow although it was delayed for a while, it was worried, but seems to be strong to except and is satisfied with it. Now, the box was also attached and useful
Since removal of a cowl was the first, and there was with wearing and the payload of 3 kg somehow although it was delayed for a while, it was worried, but seems to be strong to except and is satisfied with it.
Now, the box was also attached and useful-load up and convenience improved.
View detail
Fits: HONDA CBR600F, HONDA CB900HORNET900 , HONDA CB900HORNET900 [Hornet]., HONDA CBR600F
It is an accessory precious to this vehicle type. It is very convenient for touring at the structure which seems to be strong. However, although it becomes impossible for Bar of RIA to grasp at the time of a tandem, since it becomes the form near
It is an accessory precious to this vehicle type.
It is very convenient for touring at the structure which seems to be strong.
However, although it becomes impossible for Bar of RIA to grasp at the time of a tandem, since it becomes the form near a sheet and unification in case of use by a single, it is dramatically found useful also in comparatively large load loading.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110
KSR-110 which does not consider loading nature at all. A carrier is required equipment too. Although this carrier wearing required drilling, since the color was black, it was decided that it would be this. Drilling of attachment is a problem.
KSR-110 which does not consider loading nature at all.
A carrier is required equipment too.
Although this carrier wearing required drilling, since the color was black, it was decided that it would be this.
Drilling of attachment is a problem.
Since a location does not suit delicately, if a hole is made somewhat larger slightly than a description, it is attached simply.
Next, a GIVI case is due to be carried.
View detail