Reviews
Excellent Fit feeling
Tried on, compared, and purchased gloves from various Manufacturers at the nearest Motorcycle supply store.
I bought it because it felt like it was Exactly made to order in the shape of my hand, but when I went home and looked at it in detail, I noticed that the inside was very carefully made. The seams don't touch the skin of my hand. I have been using Mesh Gloves by another manufacturer with a good fit feeling, and I feel the seams are in contact with my skin, and when I take them off, there are traces of the seams on my hands. But these Gloves don't do that at all.
I bought it for my first ManualMotorcycle delivery in 4 days, so I don't know how it will feel, but the fit, comfort, range of motion, and resistance when moving the device make me feel that it will definitely have a great feel for operation.
Since hand shapes vary from person to person, those who do not fit should avoid it, but for those who do, it is by far the best choice.
View detail
Tight fit
I had a hard time choosing the Size because it is a European Brand.
The upper body is muscular and for reference, Dainese is 44 is Just fit.
Not MotorcycleBrand, but XS is Just fit for Patagonia.
My impression is Tight fit and close to Dainese. I can't recommend it to those who have a belly.
The design is good and I would like to buy a different series in the future.
View detail
Leather is soft and easy to use
These Gloves completely fulfill my need for a solid middle length full leather mesh glove with protection.
In addition to the above, the leather is soft and smartphone compatible, and I was even more satisfied when I actually used it.
I think the size is a little small.
As a note, I think the sewing is Large strange because it is Punching mesh, but the one I purchased had threads that were unraveled from the beginning and had to be replaced. I think it would be better to check it carefully before use when you actually purchase it.
View detail
Must-have jacket for motorcycle travel
This REVIT Sand 4 H2O Textile Jacket is a very popular flagship travel jacket, the outer fabric is made of lightweight durable and abrasion-resistant polyester fiber, with CE2 level protection on the shoulders and elbows, two configurations The inner lining is suitable for riding in all seasons, and it is very intimate to connect the jacket and pants with a short zipper at the waist. -------------------------------------------------- -------- This Revit Sand 4 H2O Textile jacket is a very popular flagship travel jacket. The outer material is made of light -quality and wear -resistant polyester fiber. There are CE2 -level protective gear on the shoulders and elbows. Configure two types: configured. The lining is very intimate with the cycling of each season, and it is very intimate with a short zipper and pants with a short zipper on the waist. Powered by Google Translator View detail
A good companion for motorcycle travel
I bought the REVIT Vertical GTX Jacket on webike. This travel jersey is made of GORE-TEX fabric, which makes me not afraid of wind and rain, and I don’t have to wear a raincoat in a hurry on the plateau where the weather changes quickly. The jacket is equipped with multiple CE2 levels The protective gear ensures my safety, and the design is reasonable and comfortable. -------------------------------------------------- -------- The Revit Vertical GTX Jacket I bought on Webike. This travel cycling suit uses a GORE-TEX fabric to make me not afraid of wind and rain, nor do I need to wear raincoats in the high-footed altitude. The protective gear guarantees my safety, and the version design is reasonable and comfortable. Powered by Google Translator View detail
Lightweight Back Protector for CELevel2
When choosing a riding wear, I think that in most cases, the back protector is common to the manufacturer.
I use it in my Levuit Sand 4. The good thing about this Back Protector is that it is lightweight and soft, so I don't feel any discomfort while Riding. The good thing about this back protector is that it is lightweight and soft, so there is no discomfort while riding.
I opened the Ventilation on the back of the Jacket and it does not feel like it obstructs ventilation.
Compared to AlpineStar and Dainese, the ventilation holes are smaller, but they are superior in terms of softness, light weight, and price. If softness and safety are important, AlpineStar has its own Air Bag Wear, which is becoming a mainstay, but the price of the Air Bag is high.
JapanManufacturer offers CELevel2Back Protector for Komine and RSThailand Chi, but Komine is the Hard Type, which is harder and heavier, while RSThailand Chi is similar to Rev-it.
Photo description below
It is very soft and follows the body.
The four-layer construction allows each piece to move independently, so it does not stick out.
It's well done.
View detail
just the right amount of vinegar and salt
It is warm even in winter.
There is less flapping, so it is less tiring.
Holds the body firmly so it is easy to maintain posture
View detail
Fit feeling highest
I was looking for a tight mesh jacket and came across this one. The fit around the arms and waist is high, and it doesn't give the impression of being too tight, so it's a good choice for those who want to look refreshed. The front fastener is easy to open and close, even with gloves on, because it's a type that doesn't have a zip on the sleeve so it doesn't damage the tank.
Ventilated Protector is included for elbows and shoulders, but Pad for back is sold separately Chest Protector cannot be worn.
I ride a mc22 and even with my old motorcycle which had a tight forward lean, my back doesn't show. It also comes with a zip to prevent the back from rolling up.
I'm a cautious 173cm and weigh 59kg and the M Size is just right for me.
View detail
Satisfied
I'm 180 cm, 71 kg, and the LSize is just right. it's made of mesh material and has a lot of air ventilation, so it's very breathable. This is the second time I've worn Revit's year-round wear, and it's lighter than my previous one, which is great because Revit has heavy protectors on both shoulders and elbows. View detail
I have recently discovered the benefits of these Gloves.
I imported these gloves a long time ago and kept them in the garage, but my wife's father recently bought a Toracer, so I pulled them out to use when I went back to my wife's parents' house. I used it after a long time, but this StealthProtector is simple, it is not so thick, but it is a solid thermal protection, and it goes well with the Adventure Jacket of Thailand. It's a good one because it's easy to use. View detail
This is the one for Adventure!
I bought this to use when I went back to my wife's parents' house. WarmWeather is sturdy, and this of the Image of RALLY50 is cool, and it matches well with my father-in-law's ToRacer, so I substituted it without hesitation because I knew the goodness of this Glove because I owned the color difference of this from before. View detail
AdventureSuit is revit
I have been looking for a RALLY 50Suit for my TENERE 700 and I was really lucky. View detail
AdventureSuit is revit
I was looking for a RALLY 50Suit for my TENERE 700, so I was lucky enough to get it at a certain Oaktion for a reasonable price and unused. View detail
A good product for Beginner
Komine's Jacket for a couple of years (JK-573 Protect Winter Jacket CE) However, it was getting dirty and old, so I decided to use it as a new jacket I bought the Jacket of
I've been wearing a Komine jacket for a while now
I thought it was standard to have Protectors in the shoulders, elbows, chest and back
This item was fitted with Protector as standard on the shoulders and elbows only
Therefore, you will need to buy an additional chest and back protector
The MSize was a good fit for me personally, but I was thinking about wearing a chest protector I bought the LSize
View detail