Reviews
Shift Pedal position has been improved.
[How is it used?
1999 CB1300SF (SC40) Mounting on
Was the one you received as per Image?
Better texture than Image and lighter weight than Bigli (Manufactured by Duralumin)
Was the installation difficult?
Since the parts around the OEMRear brake are used, it takes time and effort to remove them.
How was your experience with it?
The footpeg diameter is thinner than OEM, and the position changes 1cm up and 0.5cm back, so the shift pedal position can be adjusted further down, and the ideal position is obtained.
(OEM hits Side Stand with Downshift, old man has stiff ankles... or is it?)
[Included Parts:were they on?
Body, Product Contents, and a simple ASSY diagram were all available.
[Was there anything that disappointed you?
None in particular, satisfied with both texture and feel
Points, hangs and cautions for installation:
You will need a tool to remove the snap ring and grease up the shaft, so you should prepare these tools.
◇Availability of Instruction Manual:
Easy to understand because a simple ASSY diagram shows the relationship between Body and Screwetc. Product Contents.
◇Cautions:
Instead of opening the package suddenly next to the Motorcycle, first "Temporary group." And then...
Items that should be purchased together:
Snap ring Wrench, Grease
Opinions and requests to the manufacturer:
I was satisfied with the footpeg Knurl processing etc., very textured and well made!
View detail
REAL BALANCE Real balance Rear Sets Kit
It is a fairly cosmetic product.
There were no particular difficulties in the installation process.
Position also looked pretty good for my leg length.
In Circuit, it is easy to run without any discomfort compared to NORMAL.
Minus point is that the Plate feels a little anemic.
View detail
Although less expensive than other products, it is well made and satisfactory.
Although less expensive than other products, it is well made and satisfactory.
However, the Instruction Manual is a bit confusing, and that may be part of the CostCut. As for the side stand, as mentioned in the description, it may interfere a little if you don't shave it down. I heard that there are some products that do not interfere due to individual differences? I had interference.
View detail
Rear Sets
It was easy to replace and the position changed for the better, I'm satisfied. View detail
Fits: YAMAHA XT250X, YAMAHA SEROW250, YAMAHA XG250 TRICKER
My Right foot feels so much better now
GAERNE Fugue, LargeWearing the G Mid-Land as well on rainy days, every day TwoKing. both have thick soles, and in NORMAL, every time you break in, the toe Up and down and lateral movement was a must Once I switched to this, that went away
I'm on a commute to work with a good amount of traffic lights, so after years of repeating the above, I've developed a weird pain in my Right knee It was getting to be a bit of a problem, but after a while of fellowship, it was no longer chronic It's just a little action, but if the dust settles.. (-ω-;) Since I switched to these, I just stepped out of place and back in Instead, when I ride at Sneakers or other places when I go to my neighborhood Convenience I'm scared to step into it because it's so large (Lol)
It's a component that shows its effectiveness as the distance ridden increases, and it works well for OffBoots too! I think it's a good idea It seems pricey or expensive, but by the time the distance you ride it should have already paid for itself (Both in terms of Gold amount and satisfaction.) I recommend it
View detail
Fits: YAMAHA YZF750R, YAMAHA YZF1000R, YAMAHA YZF750SP
Cospara is good
I bought it by exchange as the fallopeg had bent.
Originally REAL BALANCE's Rear Sets were attached from the time I bought it in second hand, so the installation itself was easy
Position can also be selected from 4 places Material is also Aluminum I think that it is good as Cost performance
As a point of concern, it says that it is difficult to understand a slightly attached Instruction Manual and that Brake pedal needs some processing
I think that it is very good for those who want to enjoy a wide range of street rides to Circuit
View detail
It is COSPA's high Footpeg Kit
My Motorcycle (Kawasaki - Zr - 7) had OEM 's footpeg in a very low position, Corona and the tip of Shoes sometimes grounded on the road, so I wanted to improve, so I bought this kit. Since Zr-7 is out of print car and sold in few models, only the items listed here can be found in the dedicated Footpeg Kit. As many people wrote, Brand's footpeg diverts Pedals to OEM, so the price is kept low. I asked Motorcycle shop for installation. You can choose from 2 Position, but I am using it in the Large Yu person of the movement amount. Although it is long in the beginning of using, the use impression is good, the product itself is not cheap. View detail
cbr1100xxReal balancefootpeg
It is cheaper than other Manufacturer's items, and for myself 167 cm,
The footpeg position is also exactly good feeling. Installation was able to be installed more difficult than I expected. I also enjoyed making one run fun.
View detail
I am satisfied..
V Utilizing receipt, I used to lift Rear with 8 mm Meter's PenetratingShaft, but I was a little worried that I could break up!.
Although it did not actually break, if I break it will be Large, so I bought 1Centimeter to eliminate worries.
I do not have to worry, I think it is a good feeling!
View detail
Rear Sets
I shifted footpeg because my toes hit JetCowl 's Under Cowl. I chose not to change the height so much. Installation work was easy as per the Instruction Manual. View detail
the tension appearance of a NORMAL -- since the Step could not straddle easily when attacking a peak, the bottom purchased this product well received by a person besides . structure is good and is the Cost-performance highest. It was good to buy
the tension appearance of a NORMAL -- since the Step could not straddle easily when attacking a peak, the bottom purchased this product well received by a person besides
.
structure is good and is the Cost-performance highest.
It was good to buy it!!
View detail
Many things were investigated by liking to also introduce a Back step after Separate-handle introduction and from before. The price was worrisome in No. 1. It is it being really cheap and being easy to introduce. -- since it is chea
Many things were investigated by liking to also introduce a Back step after Separate-handle introduction and from before.
The price was worrisome in No. 1.
It is it being really cheap and being easy to introduce.
-- since it is cheap again, and there is also no admiration on which he is skimping and it is made carefully firmly --
-- it is satisfactory.
Even when the after [
] BALIUS was pure, it was easy to carry out a Knee grip, but this is put in and there is touch which becomes more easy to carry out.
Appearance is a Cool after
.
View detail