Reviews
I attached with ZRX1200DAEG. It is satisfied with bright pure white touch. Since structure of a shade was just regarded as coarse, four stars were used. It is recommended in total.
I attached with ZRX1200DAEG.
It is satisfied with bright pure white touch.
Since structure of a shade was just regarded as coarse, four stars were used.
It is recommended in total.
View detail
Illumination is good when ON
I bought it to make it possible to turn on and off the ETC normally not used by the switch. Visibility is also good as it can be illuminated when on with LED. View detail
Is good
Hazard's Switch I bought it for my own work.
It seemed that usability was good, so I bought it but it was as I thought. Since Size is bigger than I thought it is better to check dimensions well.
View detail
Since the irradiation range of a High low suits firmly and a glare does not come out, a Loud HID 55W H4 5000k Taper slide and the combination of lei Brick Reflector FB03 are the strongest combination.Although HID was using made in [ three sorts of / cheap
Since the irradiation range of a High low suits firmly and a glare does not come out, a Loud HID 55W H4 5000k Taper slide and the combination of lei Brick Reflector FB03 are the strongest combination.Although HID was using made in [ three sorts of / cheap ] Chinese in the past four years, the glare all set it to Loud HID 55W drastically severely, and it was Satoru Taisho.Having attached is replacing the Light-stay Light case in the thing of W650 by '01 Harley-sportster XL1200S.Since the Valve is also shaking gradually by a bull bull and vibration at the Speed of 70 km/h or less, it is a place where the durability of the linkage mechanism of a Taper slide is somewhat anxious.Since there is room miniaturized more, such as the
Ballast, I would like to count on a Manufacturer.Under the present circumstances, since it is very brightly legible, COSPAR thinks that it is very high.
View detail
Although the same thing was attached to CB400SF two years ago, it took out to trade-in, equipped on the occasion of vehicles exchange. There is also no trouble, and since it was a favorite, it is a select this time also. Since mist required attach
Although the same thing was attached to CB400SF two years ago, it took out to trade-in, equipped on the occasion of vehicles exchange.
There is also no trouble, and since it was a favorite, it is a select this time also.
Since mist required attachment last time, there was no problem, but the ballast and the relay were still big too.
There is no space in the circumference of a front, and it stored under the sheet.
Since stability is perfect although he wanted to use *5 piece if it is made to evolve in two years, it is *4 piece.
View detail
First of all, it is satisfied. Since it was only 88 and a solam that are taking out the HID kit of 45W, although it wavered, it carried out here. (The solam was out of stock at this time) (good place), [ quite bright ] Since it is 5500K, wirin
First of all, it is satisfied.
Since it was only 88 and a solam that are taking out the HID kit of 45W, although it wavered, it carried out here.
(The solam was out of stock at this time) (good place), [ quite bright ]
Since it is 5500K, wiring with sufficient (since it is 6500K use until now) visibility is a simple (place to worry). Ballast,
A unit is big anyhow... Although attached to that the change sound of HI-LO sounds with BASHITSU ! firmly, and its CB400SF NC31 with HI-LO near comparatively a little,
It is in the place where the ballast and unit the intention of storing in a tail cowl was [ unit ] miscalculation are halfway, and if it is going to store in a compact although the relay from a battery (probably for full cowls) is long, a ballast will come per Shimo of a tank.
Since engine heat was anxious when it was right, it was made after all the form put between a light case and light stay.
However, since the ballast etc. were merely big, when he bought short stay in the home center and slight light stay was merely extended, it was settled in Gili.
Since the bikini cowl is attached, even if it extends, it does not understand at all.
(Cable extension 100? although he bought it, it did not use ... disappointed ...) It is a recommend without a complaint in the bol d'or system of a full cowl, a replica, or CB! The head may be used for a naked for a while.
It is synthetically good elegance.
View detail
I equipped ZRX1200DAEG. It is very bright and pure white touch. Since structure of a shade merely felt it coarse, four stars were used. It is satisfactory in total.
I equipped ZRX1200DAEG.
It is very bright and pure white touch.
Since structure of a shade merely felt it coarse, four stars were used.
It is satisfactory in total.
View detail
It is light more! Although 45W5500K was used until now, compared with the car of HID2 LGT, it is dark too, and since it was a campaign exactly, impulse buying of the 55W [ strongest ] has been carried out in spite of itself. Although it must be 6000K,
It is light more! Although 45W5500K was used until now, compared with the car of HID2 LGT, it is dark too, and since it was a campaign exactly, impulse buying of the 55W [ strongest ] has been carried out in spite of itself.
Although it must be 6000K, 5000K and packing mistake ? were thought with it being somewhat more yellowish than 5500K (it is daylight color before and shortly white in comparing to a fluorescent light), but we run a dark tunnel and night, and the brightness of a road surface is equal to a car, and recommended in natural touch gentle to an eye.
View detail
It is used by daily motorcycle commuting. It is bright after all. The sense of security at the time of going home is different at night. However, since Wright was exchanged for the multi-reflector, it does not cut and irradiate with a lower po
It is used by daily motorcycle commuting.
It is bright after all.
The sense of security at the time of going home is different at night.
However, since Wright was exchanged for the multi-reflector, it does not cut and irradiate with a lower portion.
When the optical axis was united with low and hi is used, it does not irradiate with this side side (immediately the neighborhood side [ Car body ]), but becomes dark.
I think that I will investigate and process a method somehow.
View detail
HID exchange was carried out for the existence appeal on the surrounding car from a viewpoint of & safety with pure dark Wright. Since he heard that it may have an adverse effect on the lens made of resin although he thought that he would make it the
HID exchange was carried out for the existence appeal on the surrounding car from a viewpoint of & safety with pure dark Wright.
Since he heard that it may have an adverse effect on the lens made of resin although he thought that he would make it the thing of 55w at the beginning, it is 45w.
I think that there is no HID of 45w not much in the other company.
The effect after wearing is dramatically bright! Very much satisfied.
However, since the ballast was fairly large, it worried about the wearing place... If it is vehicles with a cowl, I think whether to worry so much, but in the case of a naked motorcycle, a fixing position requires a device.
View detail
It is bright anyhow! If it is 55w, it seems to be in big trouble! Security is one year! Although it is 4500k, light is white than expected! Easy, if attachment is the direction currently improved by itself! It is the comparison with SOLAM used until now a
It is bright anyhow! If it is 55w, it seems to be in big trouble! Security is one year! Although it is 4500k, light is white than expected! Easy, if attachment is the direction currently improved by itself! It is the comparison with SOLAM used until now and HID of DELTA.
- good -- !. - runaway -- it is cheap! Burner back is a little short.
The affinity of a bulb and a multi-reflector is good (even if it changed the old thing, optical axis changes were very few -- Hi was useless when optical axis adjustment was carried out by Lo)! A - useless !- ballast and a control unit are too big. -- Although it was attachment to CB400SF,
It struggled with the attachment place.
The extension cord is not attached, although he spared and the general-purpose article was purchased. -- The cord was lacking at all to the location to attach a ballast to.
I think that it probably becomes the same situation by almost all vehicle types.
Since the elegance only for the said manufacturer empty vehicle kind has come out, we recommend you there!!
View detail
Cling to the 05 models Z1000. If it is made just like that since the instruction manual of attachment is intelligible, I will think that it is OK. It is so bright that it passes over brightness enough. A run could also be enjoyed in comfort at
Cling to the 05 models Z1000.
If it is made just like that since the instruction manual of attachment is intelligible, I will think that it is OK.
It is so bright that it passes over brightness enough.
A run could also be enjoyed in comfort at night.
Since there was time and effort of an instruction manual being insufficient and having you telephone and send this time, four stars were used.
View detail
This type has little number of parts count, and a simple and a low price are charm. Since Wright did not switch on the light if the engine started and voltage did not go up, TDM-850 judged that a voltage drop relay was unnecessary. Attachment of a
This type has little number of parts count, and a simple and a low price are charm.
Since Wright did not switch on the light if the engine started and voltage did not go up, TDM-850 judged that a voltage drop relay was unnecessary.
Attachment of a burner is also easy only at adjustment of a fixed spring, and drilling of a dripproof rubber cover.
The attachment of a ballast has fixed commercial sus hole vacancy stay to the cowl securing bolt and the empty stay nut for accessories by bending and 2 of only cutting at the cowl lower right.
The power connection of a power cord is possible in change of the coupler terminal of the cord place from a ballast.
It was finely settled in the cowl.
Wright also became bright and his worries about a ball piece also disappeared.
An attachment instruction manual is also known well and is safe.
View detail
Fits: その他
It attaches with yamaha R1-Z. With an attached kit, they are those with CHOI fault. It power-source-harness-extends (it purchases beforehand), cable short is carried out, and it is 縲? The part voltage effect in which a battery is smaller than
It attaches with yamaha R1-Z.
With an attached kit, they are those with CHOI fault.
It power-source-harness-extends (it purchases beforehand), cable short is carried out, and it is 縲?
The part voltage effect in which a battery is smaller than anything is severe.
It does not cut in an engine ordinarily but is surprised just for a moment.
A relay kit is purchased and it attaches again.
Very comfortable at the time of a run at night!!! It is H4-4500k (Low) and is a field-of-view cinch.
View detail
Fits: YAMAHA TMAX-07, YAMAHA TMAX-07
In putting in HID, although it worried with whether a ballast will be attached suitably somewhere, he bought the installation KIT which carries out well attachment. If a description, an accessory, etc. are those who can disclose a cowl since the well
In putting in HID, although it worried with whether a ballast will be attached suitably somewhere, he bought the installation KIT which carries out well attachment.
If a description, an accessory, etc. are those who can disclose a cowl since the well is carried out, I regard them as easy.
Although the top attachment place was [ the crevice between stay ] sorry about one, there was individual specificity, or welding is rising and a screw did not pass along mine.
Since it can do what, it has fixed by the cable tie.
It was a five stars when there was even no it.
View detail