Reviews
I attached with ZRX1200DAEG. It is satisfied with bright pure white touch. Since structure of a shade was just regarded as coarse, four stars were used. It is recommended in total.
I attached with ZRX1200DAEG.
It is satisfied with bright pure white touch.
Since structure of a shade was just regarded as coarse, four stars were used.
It is recommended in total.
View detail
It broke within a week
It has been sluggish since it was opened
After opening the package, when I pushed Button, it did not lock and could not hold its position
After a few pushes, it locked up and went into position holding, and then it was fine I installed it without making it Objection
I installed it and test drove it and everything was fine, but a week later, the initial symptoms again, don't lock it up I can no longer hold the position
I thought a few presses would fix it, but no matter how many times I pressed it this time, it didn't work
In addition, the Button part was blown off while driving, and I decided it was completely useless And it became Garbage box line
I think it's a product issue as the usage is normal use with no problems
It's a shame, because the design and size are just right, and the conditions are good for waterproofing It is
View detail
It's my favorite Switch.
Waterproof property of this switch when it is brand new is very high and can be reliable enough, but unfortunately if you use it for a while, WaterproofRubber is not strong against so-called outdoor ultraviolet light of light fastness, so it is influenced by daily UV rays WaterproofRubber deteriorated and the mountain of Boots part of WaterproofRubber (valley) A crack will be broken little by little from the fold and it will be torn.
Especially mountain of Boots section of WaterproofRubber (valley) The folded part is on of Switch / I think that it is easy to rip because it is a place that moves frequently because it opens and closes during off operation.
I am Quantity of Daylight : Pair (for Left and Right) To switch this to Quantity : Pair (for Left and Right) 1pc. I use it one by one..
After all, On / The one with more frequent use of Water was quick to split the Boots section of WaterproofRubber.
However, the mountain of the Boots department of that WaterproofRubber (valley) Even if the folded part was split and the rain or the like was inundated with the Switch, there was no electric leak especially and I was able to use it for about a year without any abnormality.
It seems that damage caused by flooding has accumulated if I used it for about 1 year while staying in a state of flooding, contact point of Switch etc etc. I got rusted and the Switch ceased to enter. (Do not energize. )
Although it is such a switch, normally it is very easy to use at normal time, the appearance is also Simple and the LED shines so it is Cool, in fact I like it very much.
I think that the price is somewhat expensive, but basically Switch and others are consumables so we think only if it will be replaced if it gets broken.
As this switch is pointing to deterioration of WaterproofRubber part, it is not easy to do TAB, receptacle to everyone, but even those who want to use even if it is not certain that it was written indeed. Please purchase on your know.
Usability and Parenthesis Goodness is the Level of Number one. (Personally I like Large love. )
When I do not ride the Motorcycle, I always use a thick, durable Bike Cover (About 10,000 yen) We were taking measures against weather and sunlight and ultraviolet rays, but still the WaterproofRubber part of this Switch had torn in about a month after installation.
Even at expensive Bike Cover excelling in weather resistance 4 years was the limit of exchange, so it may be unavoidable that WaterproofRubber of this Switch has a lifetime of one month.
Certainly, products that are superior in weather resistance and can maintain the durability of Waterproof Rubber for many years may be ideal, but with current technology and this price setting, the quality and durability of this Switch may be the technical limit Hmm.
Anyway, usability (Operability) And it looks simple and Parenthesis good (LED lit) So it is amazing to not mind that WaterproofRubber is ripping.
Again, I will not recommend this switch to everyone, but I think that if this Switch that I am installing is broken, I will purchase the same Switch and replace it.
I say.
As a matter of fact, I bought this switch with a certain Shop before and it was broken at last (ON impossible) Because I saved it, just because I found the same item with Webike, I bought it again and replaced it with a broken switch and it was repaired.
Actually, this item's Repeater. (4th haha)
I am satisfied with purchasing after understanding the bad part and the good part of this Switch well and I like it and I use it.
I really like to give ★ so I really want to improve future weather resistance Dynamic evaluation of the current ★ ★ ★ (3 stars) I declare it in.
View detail
Waterproof decides!
【What made you decide the purchase?】 Being WaterproofSwitch.
【How was it actually used?】 In the rain, I used it many times, but the problem has not occurred.
【Was it difficult to install? (Hard parts case)】 Because the shape of the switch is round, it was easy to make holes to install.
【Please tell me the point of installation and hang (in the case of Hard parts)】 In the attached Motorcycle there is Upper Cowl, inside it is an Inner cover. Material is a soft material of resin type, so after opening a small hole with Drill, I spread a hole to fit the Large size of Switch with Reamer. Switch has a patch on the circumference part, Switch does not rotate if notches are made according to the hole to be attached. There is also a patch for preventing slipping, so stop the Screw
[Is there anything I was disappointed about?] No dissatisfaction at all.
【Hope for Manufacturer - Please tell us if there are any improvement points】 I want the product to have Small mark on the Waterproof Cap's ON side in the Lineup.
【Have you compared items?】 There are no specific products.
[Others] Manufacturer not claiming Waterproof though it is a product to be attached to Motorcycle, closed to having many products.
View detail
It was quite durable
It is brighter than OEMLight and looks also Parenthesis so it is installed. I forgot when I first bought it, but I have purchased this since I broke down this time and replaced it. Although the price is divided, it is durable and a sense of security is different. View detail
Ballast broke down in half a year
Big scooter is not cheap because it costs the cost of desorption of Cowl, purchase this item with a certain amount of security fee included, and ask for installation on Motorcycle shop.
Since it ceased to illuminate half a year later, it was said that Ballast caused the incident to be investigated in the installed Shop.
When we contacted this situation with Support, you can use security, but answer that we will not bear the labor of detaching Ballast.
With this, I do not know what I bought a 88House product that is not Chinese made for what.
"LOUD H. I. D is by no means cheap. Although it says on the HP and so on but it is not cheap and quickly breaks down, it can be said to be outrageous luxury goods
View detail
Illumination is good when ON
I bought it to make it possible to turn on and off the ETC normally not used by the switch. Visibility is also good as it can be illuminated when on with LED. View detail
Is good
Hazard's Switch I bought it for my own work.
It seemed that usability was good, so I bought it but it was as I thought. Since Size is bigger than I thought it is better to check dimensions well.
View detail
Attachment to Power Switch
ETC and Navigation - Grip heater and radio said,
I bought it for the power supply switch of Attachment.
Red Switch is used for power supply Relay,
Blue Switch is used for power supply of each Attachment.
The advantage is that WaterproofSwitch with LED Lamp is cheap price,
It is a point that I could purchase.
I hope this will reduce the load of Battery.
View detail
Since the irradiation range of a High low suits firmly and a glare does not come out, a Loud HID 55W H4 5000k Taper slide and the combination of lei Brick Reflector FB03 are the strongest combination.Although HID was using made in [ three sorts of / cheap
Since the irradiation range of a High low suits firmly and a glare does not come out, a Loud HID 55W H4 5000k Taper slide and the combination of lei Brick Reflector FB03 are the strongest combination.Although HID was using made in [ three sorts of / cheap ] Chinese in the past four years, the glare all set it to Loud HID 55W drastically severely, and it was Satoru Taisho.Having attached is replacing the Light-stay Light case in the thing of W650 by '01 Harley-sportster XL1200S.Since the Valve is also shaking gradually by a bull bull and vibration at the Speed of 70 km/h or less, it is a place where the durability of the linkage mechanism of a Taper slide is somewhat anxious.Since there is room miniaturized more, such as the
Ballast, I would like to count on a Manufacturer.Under the present circumstances, since it is very brightly legible, COSPAR thinks that it is very high.
View detail
Although it planned to attach ETC to a Motorcycle, and it thought whether wiring of a Tail lamp would be used and it would be made key linkage at the beginning, it also regarded sending current, whenever it rides on a Motorcycle to ETC which will hardly b
Although it planned to attach ETC to a Motorcycle, and it thought whether wiring of a Tail lamp would be used and it would be made key linkage at the beginning, it also regarded sending current, whenever it rides on a Motorcycle to ETC which will hardly be used as how it is, and made it ON-OFF [ with an external Switch ].
.
-- luminescence of the Blue which suits into my blue car body well can be performed -- and a waterproof Switch
-- it was just best.
wiring is connected by such touch.
(ON time a light type) )
The drilling process was carried out to the position which can be operated ride, when the high-speed interchange approached, and it attached to it.
The measure against water proof is required for the portion of the
inner terminal separately.
View detail
Although the same thing was attached to CB400SF two years ago, it took out to trade-in, equipped on the occasion of vehicles exchange. There is also no trouble, and since it was a favorite, it is a select this time also. Since mist required attach
Although the same thing was attached to CB400SF two years ago, it took out to trade-in, equipped on the occasion of vehicles exchange.
There is also no trouble, and since it was a favorite, it is a select this time also.
Since mist required attachment last time, there was no problem, but the ballast and the relay were still big too.
There is no space in the circumference of a front, and it stored under the sheet.
Since stability is perfect although he wanted to use *5 piece if it is made to evolve in two years, it is *4 piece.
View detail
It was used for CB400SB. The directions which install a ballast under a sheet although it is 88 Haus' 45 W/HID attaching are indispensable items. Although it was 1 or 5 m, even if you made it crawl ahead from near a rear cowl, it remained for a wh
It was used for CB400SB.
The directions which install a ballast under a sheet although it is 88 Haus' 45 W/HID attaching are indispensable items.
Although it was 1 or 5 m, even if you made it crawl ahead from near a rear cowl, it remained for a while.
Although it is ! whether it is expensive although written [, you ] and it was made into *3 piece, there is sense of security of a regular article.
View detail
First of all, it is satisfied. Since it was only 88 and a solam that are taking out the HID kit of 45W, although it wavered, it carried out here. (The solam was out of stock at this time) (good place), [ quite bright ] Since it is 5500K, wirin
First of all, it is satisfied.
Since it was only 88 and a solam that are taking out the HID kit of 45W, although it wavered, it carried out here.
(The solam was out of stock at this time) (good place), [ quite bright ]
Since it is 5500K, wiring with sufficient (since it is 6500K use until now) visibility is a simple (place to worry). Ballast,
A unit is big anyhow... Although attached to that the change sound of HI-LO sounds with BASHITSU ! firmly, and its CB400SF NC31 with HI-LO near comparatively a little,
It is in the place where the ballast and unit the intention of storing in a tail cowl was [ unit ] miscalculation are halfway, and if it is going to store in a compact although the relay from a battery (probably for full cowls) is long, a ballast will come per Shimo of a tank.
Since engine heat was anxious when it was right, it was made after all the form put between a light case and light stay.
However, since the ballast etc. were merely big, when he bought short stay in the home center and slight light stay was merely extended, it was settled in Gili.
Since the bikini cowl is attached, even if it extends, it does not understand at all.
(Cable extension 100? although he bought it, it did not use ... disappointed ...) It is a recommend without a complaint in the bol d'or system of a full cowl, a replica, or CB! The head may be used for a naked for a while.
It is synthetically good elegance.
View detail
I equipped ZRX1200DAEG. It is very bright and pure white touch. Since structure of a shade merely felt it coarse, four stars were used. It is satisfactory in total.
I equipped ZRX1200DAEG.
It is very bright and pure white touch.
Since structure of a shade merely felt it coarse, four stars were used.
It is satisfactory in total.
View detail
Although HID of the cheap article bought in at the auction until now was used, the carry substitute was performed at the time of the automobile inspection. It is with a domestic manufacturer thing and is taking its hat off first at a firm manual.
Although HID of the cheap article bought in at the auction until now was used, the carry substitute was performed at the time of the automobile inspection.
It is with a domestic manufacturer thing and is taking its hat off first at a firm manual.
Any problem cannot be found, the light is switched on and it is brightness first until now.
Brightness like this with a shade promises the preeminent field of view which is not obtained in cheap HID.
There is also a thing with a little old design, and a ballast and a control unit are large.
Although it is negative implications there, I was allowed to make it into plus minus zero in consideration of the reliability which it is continuing selling by the same ballast, and the low price of a price.
Although a special thing has no wiring, it may be troubled with arrangement of a ballast by a vehicle type.
When equipping a naked, the direction which purchases the object for vehicle types thinks that time and effort decreases.
This kit will be a recommend if HID-ization is performed on a low budget.
If even the problem of a layout is clearable, it will be a superior kit which offers the brightness more than a price.
View detail
Kawasaki 2011 model Z1000 is equipped. Since it was general-purpose, although processing etc. regarded some as required, they were unprocessed. A ballast can be stored in a screen. Although a hang also needs a burner just for a moment, it atta
Kawasaki 2011 model Z1000 is equipped.
Since it was general-purpose, although processing etc. regarded some as required, they were unprocessed.
A ballast can be stored in a screen.
Although a hang also needs a burner just for a moment, it attaches and completes from the back side, without removing a cowl.
He had no necessity of also extending wiring.
Although it is brightness, compared with 35W6000k, it is brightly satisfactory at HID of the other company.
Certainly [ since a noise will enter very well if an earmuffs type radar receiver is used although the front motorcycle was also equipped, when the direction using an earmuffs type radar receiver sticks the shield tube which stops a noise to wiring of a ballast ].
View detail
It is light more! Although 45W5500K was used until now, compared with the car of HID2 LGT, it is dark too, and since it was a campaign exactly, impulse buying of the 55W [ strongest ] has been carried out in spite of itself. Although it must be 6000K,
It is light more! Although 45W5500K was used until now, compared with the car of HID2 LGT, it is dark too, and since it was a campaign exactly, impulse buying of the 55W [ strongest ] has been carried out in spite of itself.
Although it must be 6000K, 5000K and packing mistake ? were thought with it being somewhat more yellowish than 5500K (it is daylight color before and shortly white in comparing to a fluorescent light), but we run a dark tunnel and night, and the brightness of a road surface is equal to a car, and recommended in natural touch gentle to an eye.
View detail
It is used by daily motorcycle commuting. It is bright after all. The sense of security at the time of going home is different at night. However, since Wright was exchanged for the multi-reflector, it does not cut and irradiate with a lower po
It is used by daily motorcycle commuting.
It is bright after all.
The sense of security at the time of going home is different at night.
However, since Wright was exchanged for the multi-reflector, it does not cut and irradiate with a lower portion.
When the optical axis was united with low and hi is used, it does not irradiate with this side side (immediately the neighborhood side [ Car body ]), but becomes dark.
I think that I will investigate and process a method somehow.
View detail
HID exchange was carried out for the existence appeal on the surrounding car from a viewpoint of & safety with pure dark Wright. Since he heard that it may have an adverse effect on the lens made of resin although he thought that he would make it the
HID exchange was carried out for the existence appeal on the surrounding car from a viewpoint of & safety with pure dark Wright.
Since he heard that it may have an adverse effect on the lens made of resin although he thought that he would make it the thing of 55w at the beginning, it is 45w.
I think that there is no HID of 45w not much in the other company.
The effect after wearing is dramatically bright! Very much satisfied.
However, since the ballast was fairly large, it worried about the wearing place... If it is vehicles with a cowl, I think whether to worry so much, but in the case of a naked motorcycle, a fixing position requires a device.
View detail