Reviews
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It works. It's just expensive!
One of my friends suggested that I change the shaft, and although I had no particular problem with it, I decided to replace it with a new, stronger shaft rather than continue to use the old one. I decided to replace the old shaft with a new one that is stronger than the old one.
[Axle Shaft]
Axle Shaft is a rod that drives the Wheel. The Axle Shaft plays an important role in supporting the Wheel so that the Wheel rotates around the Axle Shaft, and without the Axle Shaft, the Wheel would come off the axle.
[ASKULShaft's role]. ‥
◎Transmits the load input to Tire and Wheel to Suspension.
◎The Bearing, Distance Collar, and Axle Color at the hub of the wheel are integrated and fixed with the least amount of friction.
◎Brake Disc or Sprocket position is determined at the Center of Caliper or Chain line.
It's not just an iron rod. (^o^) /
Replacement of Axle Shaft
The effect that can be felt depends on the type of car and whether it is Front or Rear. 。 In general, the Front tends to increase the lightness of handling, and the Rear tends to make it easier for the suspension movement to be transmitted to the Rider, and the condition of the Tire, including the feeling of ground contact, to be easily understood.
→ I will try Rear!
What is Chromoly? ‥
The official name is Chrome molybdenum steel. Iron Combined Gold with a very small amount of Chrome and Molybdenum added to iron. 。 Specified to contain 0.1-0.5% carbon, 0.9-1.2% Chrome, and 0.15-0.45% Molybdenum 。
No change in strength even in high-temperature, high-pressure environments, and moderate "Shita" The material is used in bicycle frames, crankshafts, stabilizers, aircraft leg parts, etc., to absorb vibration due to its high strength and ductility.
[Merit to Chromoly]. ‥
(1) Rigidity is increased.
Axle Shaft is one of the rigid components of Suspension, so high rigidity and strength are required. 。 Always while driving "distortion" It is the only thing that supports the weight of the car body by receiving the large force from the wheel and suspension. 。
By reinforcing the suspension, the suspension is properly activated against external forces from the road surface during driving, and the tires are stably grounded to the road surface.
→ Improves straight line stability and minimizes yawing during corner rings.
Improved rigidity compared to the→OEMShaft, and increased front ground contact for improved cornering performance.
→Breaking is also more stable, as the back footing is more effective when breaking.
(2) Increased accuracy.
Except for a few special vehicles, production vehicles are limited by cost, and there are many areas in which compromises must be made. 。 The OEM Axle is also not as precise as we would like it to be, due to cost. Simply put, it is made finer than the original Size that we want to make. 。 On the other hand, the external ChromolyShaft is cost-effective and finished to a high degree of precision; the bearing, distance collar, and side color are all in perfect alignment, bringing it closer to the ideal structure envisioned by the developer. 。
The increased axial accuracy of the→shaft reduces Wheel rotation loss and lightens the push/pull.
Merit is all I have, the price is so high (laughs).
Replacement Procedure] It's easy... (;・∀・)
(1) Tire does not fall off (not on the ground) Lift to a degree.
Loosen the shaft fixing bolt on the Right Side with a wrench.
Loosen the Axle Shaft from the Right Side.
Loosen the fixing bolt on the Left Side.
(5) Remove the shaft nut and pull out the shaft.
Effect after replacement ‥
◎The rigidity of the undercarriage has been increased, and it is easy to feel the sense of gripping the tire, giving the driver a sense of security.
◎Because the body behavior is settled, effective Brakes that stop short are possible. In other words, less flexure and more stability than OEM.
◎The rotation of Tire becomes lighter and easier when pushing and walking.
The most obvious was at low speeds. No wobble when starting or stopping. 。 I think this is a large advantage for low-displacement vehicles that cannot use high speeds.
View detail
well
Following the Front
Rear was also replaced.
NORMAL605g
Chromoly420g
I look forward to a test run later in the day!
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100
I thought it was just a stick.
I put it on a ZEPHYR750 with GALE SPEED wheel.
First of all, I felt the lightness when I straddled it and backed it out of Garage.
Next, Curve driving
I think it is because my Motorcycle has been converted to 18Inch.
It was the kind of Motorcycle that Curve would not turn!
Of course, if you shift your buttocks in a Large gesture, it will bend.
I was a little frustrated.
I changed to this product and ran it.
Curve has become curved and
The test let go of the Curve before the test and
When the Curve is bent, the Handlebar is also bent naturally.
It was a very good Fee Ring.
And it's very light compared to OEMWheel.
Wheel feels very light in the front.
It was too good to be feeRing.
I'm even ordering for Rear!
Maybe it's because Machine is old and I feel like it's too much.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100
Chromoly Axle Shaft
I installed it on my ZEPHYR750, and to be honest, I was skeptical about it, but as soon as I installed it, I could see the difference. The stability is much different, and I can feel it is stable even on undulating road surfaces. View detail
Rumored ChromolyShaft
'88MODEL with Vmax.
Most people say it's good, but honestly, does it really make that much difference? I was skeptical about whether I would be able to experience it myself. I was skeptical, but it was a drastic change.
I was hesitant to pay such a high price for a mere Shaft1 pc, but considering the fact that it is made by craftsmen under strict control and the drastic changes more than the Gold price, I was more than satisfied with this product! The slight vibration is eliminated, and the original work of the tires and suspension can be understood and the behavior of the car becomes more straightforward, so even if you don't drive on a mountain pass, you can feel the difference when driving on the street or even when pushing the car around.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It works pretty well.
I had seen good feedback on the Pivot shaft, so I decided to go with the Chromoly.
When I banked at a certain speed, I could feel the body of the car swaying, but when I added the Chromoly Shaft, the swaying of the swing arm disappeared and the rigidity increased.
The Winding is now more stable at higher speeds and very enjoyable to drive.
It may be a bit of an exaggeration, but it's as if you've replaced the Swing Arm with a more rigid one.
View detail
Fits: KAWASAKI ZEPHYR400χ [Zephyr]., KAWASAKI ZEPHYR400χ [Zephyr].
Bolt in one.
Bolt is also a Large cutaway Parts.
How can a single shaft change the rigidity of a vehicle? But I bought it with expectation.
Simply replace your existing ASKULShaft.
Effectively, it's antsy.
Thanks to the suspension being fixed firmly, the Suspension will be able to do its job well.
good point
Simply replace the existing Shaft.
It's Chromoly, so it's durable.
The suspension moves nicely because it is fixed firmly. I think you can feel the difference with OEM suspension as well as external.
A bad point
The frame is fixed, but the frame is firm, so it may be hard to ride comfortably.
Even one bolt can contribute to the rigidity of the vehicle, so I think it is a very interesting part.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Rear stiffness can be easily increased.
I've been noticing some sagging in the rear of the car when embracing, so I've been retightening and adding a washer, but to no avail.
Because it says that there is ASKULShaft of Reinforcement Type, I bought it.
good point
Just replace with OEMASKULShaft.
It's very stable around the rear. ●Embracement is applied beautifully.
Because the extra movement is suppressed by the ASKULShaft, the movement of the rear suspension also becomes better.
A bad point
It's quite high.
Yes, it is expensive. But if the rigidity of the car body is increased so much, I think it is cheap.
Maybe you can feel it even if you change only ASKULShaft in all NORMAL.
I really recommend it.
View detail
Very good product.
First of all, I was a little impressed with how light it was out of the box and held. The texture is different from the NORMAL. The difference between the NORMAL and the CUSTOMER is that the customization has improved and I love it more. As for the impressions after driving, the response from the entrance of corner is stable and light and it seems to be easy to feel the ground contact of the tire. I think it came to be able to turn well. View detail
Good product
I was worried about how much I would experience the difference from NORMALShaft. Because it is an expensive purchase for me, I thought I would regret it if I did not know the difference. When I replaced them, I felt like I could feel the firmness of the road surface a little more easily. I feel that the corner is easier to turn. It's an expensive part and it makes me feel better. View detail
Good product
I was worried about how much I would experience the difference from NORMALShaft. Because it is an expensive purchase for me, I thought I would regret it if I did not know the difference. When I replaced them, I felt like I could feel the firmness of the road surface a little more easily. Also, the rigidity has gone up so you can ride more stable. It is an expensive part and it makes me feel good. View detail
You can see changes soon
After buying and installing in front and back, I realized the difference clearly just by pushing. It became very light. Since Cornering may cut too much until it gets used to it, only that attention. View detail
Products of this hand have an effect in the ground
【What made you decide the purchase?】
I have not changed only Front
【How was it actually used?】
The product of this hand feels an effect in plain
【Was it difficult to install? (Hard parts case)】
From the experience of changing another Motorcycle before installation
Maintenance Standetc. The person who does not have to purchase at the same time! Although exchange of things is not so difficult, it is safe if you asked Shop to those who do not have confidence about suspension relationship
【Please tell me the point of installation and hang (in the case of Hard parts)】
STANDetc. Same as the above answer
[Is there anything I was disappointed about?]
I wanted you to enter the product until Nut instead of using pure STD Nut
【Hope for Manufacturer ? Please let me know if there are any improvement points]
I would like to have genus with with Nut
【Have you compared items?】
I am using Vito at gs1000 I can not find it with Vito I purchased it here but I think it is the correct answer
[Others]
After all three points change is Recommendation In that case the price will be quite expensive! If the price is cheaper a little more!
View detail
Recommended from the Front first as Custom parts
SPSpec. Because of OHLINS Suspension, there is no indication or indication from Rear
I'm changing.. Sire and information are easy to be transmitted from Tire.
Purchase Front's adaptation is OK. As Manufacturer says
Straight running stability, turning performance improves. In particular, the anxiety at the time of turning disappears
You can now open Throttle.
Although it is an inconspicuous Parts, unlike NORMAL, it is more difficult to ride
It will be fun.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI ZX-14R
Not conspicuous but high performance
You do not notice without NORMAL's machine next to it.
There are many things that are not noticed even if you stay.
I mean, I have never noticed.
It is not that conspicuous, but it does a good job.
This Axle Shaft makes the movement of Front fork fair.
It also helps to improve the straight running stability fell due to weight saving.
It will convey information properly.
Chromoly steel was chosen because it aimed at absorbing shock more sticky than Titanium hardness.
View detail
Effective Large for Shaft diameter thin XJR 1200
You can feel it from handling after installation.
Even by turning at an intersection, you can see the difference as if you changed the air pressure of Tire.
The effectiveness of Brake improves, the rigidity also increases, the amount of information from the road surface surely increases,
There is more effect than imagination, cost effectiveness is satisfactory.
After wearing, the feeling of ruggedness increases, so it seems that you need Suspension setting as you like.
View detail
Chromoly Front Axle Shaft was good
I exchanged Chromoly Front Axle Shaft and found more performance than I expected, so I will exchange PivotShaft without hesitation.
The CB 1300sf is old because the design itself is too heavy, and because it was built for the purpose of Touring, there is impossible for CornerWork at the same speed as SS etc?
For such Motorcycle, I feel that it is perfect Parts for the rigidity up of Front, Rear, Pivot.
RearShaft is also planned after replacing PivotShaft.
I feel Cost performance is good.
View detail
It is recommended
Front has already exchanged but the impression at that time was wonderful and good, so Rear is also purchased this time.
The exchange just pulls out Shaft that I'm arriving and just inserts this ChromolyShaft.
OEM is fixed on Split Pin on Nut side, but this product is Lock nut.
Since my 12R is changing Swingarm, the rigidity has already increased, but the impression of changing this product was not that much.
But when I looked at the OEMShaft I removed it may be that it was just a good time to exchange because the part to which Bearing hits is with Stages worn out.
View detail
Super-explosive sound roaring settled in the low-pitched sound of good touch. Although the After Fire was also severe, it stopped almost coming out. Although attached with the Wyvern, the outer circumference was deleted somewhat. It completed i
Super-explosive sound roaring settled in the low-pitched sound of good touch.
Although the
After Fire was also severe, it stopped almost coming out.
Although attached with the
Wyvern, the outer circumference was deleted somewhat.
It completed in about 5 minutes with
iron file.
Since
adjustment can be performed, I would like to try many things.
Although
amount of money is a little higher, I think if it considers that the Baffle of a Punching carries out at least 10,000, to the extent that it is cheap.
View detail
[Webike Monitor] The difference from the NORMAL can be felt. It is stable when the Brakes are applied. Since how for road surface situation to be transmitted becomes sensitive, he may get tired with a Long touring. If it gets used, I w
[Webike Monitor] The difference from the
NORMAL can be felt.
It is stable when the
Brakes are applied.
Since how for
road surface situation to be transmitted becomes sensitive, he may get tired with a Long touring.
If it gets used, I will think that there is no problem.
View detail