Reviews
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
person who does the work behind the scenes
I bought it based on other people's impressions. I was quite resistant before I purchased it, and haDrill to say, this price for one stick! View detail
BALIBALI sound in Mild
It was muffled by End Baffle in Silencer, but because of the deterioration of Glass Wool, it was not possible to use it for a long time Because I felt that the sound quality was bad and the sound became Large this time Inner I bought one for baffleStainless Steel It is unmachined and spotted on my Stainless Steel Exhaust System I was able to install it I removed the End Baffle with the most squeezed, but I think it became a little quieter than before (Maybe it's because the sound quality is more rounded.) 。 View detail
Whether the construction is beautiful, understandable person understands.
I first installed it in the 2006 GSXR 1000 Front. I realized immediately that the handling became lighter and the rigidity increased.
For about a year I got on as it was and when I replaced Pivot, Rear axle shaft for Chromoly, I think I gained a sense of unity.
First of all, I think it would be good to exchange Rear after replacing Front.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R1100
Engine sound reduction effect
It attached to GSX-R1100 of 87 year.
SpannerQuantity : Install with 2pc - I think that it is low in difficulty because it can be adjusted.
Working space is narrow because of carburetor, but it can be replaced without removing carburetor.
Instruction Manual was enclosed in it and it was OK as it was installed and adjusted accordingly.
Turn the adjustment Bolt and advance the Notifier of Tensioner in Manual.
In my Motorcycle, I advanced 1Notch and looked at the situation but the Engine sound changed quite a bit before and after the exchange.
If the tension is too tight, the rotation of the engine will become heavy, so be careful with too tight.
View detail
Fits: SUZUKI gsx1100s katana [katana]., SUZUKI gsx1100s katana [katana].
I tried changing what to change, interest-prone and ne
【What made you decide the purchase?】 It is purchase expecting something change. KATANA is thin and poor in Front. The decisive thing is that the head is hexagonal so you can use Spanner.
【How was it actually used?】 I wonder if it got a bit harder.. I feel that the feeling being shaken by Corner is getting smaller.. Effect on cost will be preference of the expert.
【Was it difficult to install? (Hard parts case)】 It's easy, it was around 15 minutes.
【Please tell me the point of installation and hang (in the case of Hard parts)】 When Frame is received by Jack and floated on the Fresnel on which the front wheel contacts the ground, it is super simple enough just to replace the OEM afterwards! Wheel was not necessary.
[Is there anything I was disappointed about?] Just a Bolt, there is no bad place.
Oh, I wish I wanted a hole for stopping Split Pin of Nut in OEM.
【Hope for Manufacturer - Please let me know if there are any improvement points】 I wish I had a hole for stopping Split Pin of Nut in OEM. I used to lock with Wire until now.
【Have you compared items?】 It is a Maimeba's Chromoly axle. Fork bracket I was worried with awkwardness attached.
[Others] We also sell Pivot on the back side, but it is a bit high, Frame rigidity is also weak car body Parts you care about.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR1200
Various far and near Impressions were read and it purchased drastically.Great difference is not felt in the grade (town riding) which turned at the thing with our blunt sensitivity, and the crossing.Although it is , the difference that it is so pu
Various far and near Impressions were read and it purchased drastically.Great difference is not felt in the grade (town riding) which turned at the thing with
our blunt sensitivity, and the crossing.Although it is
, the difference that it is so pure that the sense of stability of the Front at the time of making a car body bank puts on load is felt.It was shaken at the time of gathering a Gap during the
bank, and sense of security increased also in condition.
Although excessive expectation thinks a prohibited thing, an Axle thinks that it is effective parts to a thinner vehicle type with a older car body.Since
, however a rigid Balance change, the more sensitive one thinks that the result in which it is still better to also carry out a Setting of a Fork etc. will be obtained by it.
View detail
[Webike Monitor] With specification change, the object for the new models of the Front axle shaft which purchased before was purchased. although it is possible that the rigidity of the Front fork itself is also going up with specification change
[Webike Monitor] With
specification change, the object for the new models of the Front axle shaft which purchased before was purchased.
although it is possible that the rigidity of the Front fork itself is also going up with specification change in the
new model --
-- even if it deducts the point, it is thought too that the rigidity of a Front is going up.
He has no the instruction manual and the Sticker also being enclosed and saying this time [
].
I would like to try and see the engine performance early [
] at high speed.
It is the too good recommendation.
View detail
Earls Gear The middle Pipe of the Wyvern was equipped. It is purchase which gets disgusted with the awkwardness of appearance of the End buffle, and uncool tone quality. tone quality becomes the mild touch which took the angle of Baffle
Earls Gear The middle Pipe of the Wyvern was equipped.
It is purchase which gets disgusted with the awkwardness of appearance of the
End buffle, and uncool tone quality.
tone quality becomes the mild touch which took the angle of Baffle nothing and a Straight state.
The point which does not need worries about degradation by the good point not using the Glass wool for performing [ regulation of sound volume ]-by turning 13-mm Bolt
and a noise reduction material deserves
evaluation.
A bad point has a high price (smile). After
, if a Bolt on is expected, it will be betrayed.
The clear-cut idea of being a general-purpose article is also required also until it
Opens, since there is also a Case which can equip and is not if the circumference of
circumference is not considerably deleted with a sanding machine.
View detail
Since time to equip at last although time has passed considerably from purchase was made, it is in play. After all, compared with exchange before, a feeling of a well appeared in the circumference of rear one. Is it called the touch which rigidity
Since time to equip at last although time has passed considerably from purchase was made, it is in play.
After all, compared with exchange before, a feeling of a well appeared in the circumference of rear one.
Is it called the touch which rigidity went up?
However, although possibly there was also a portion of practice, when a front was changed, there was no impact of a like.
town riding which is still the usage of our motorcycle, a high speed, especially a high speed -- if -- the difference with exchange before was clear.
although it seems that the direction of R1000 was purchased between front~rear exchange, and there were no feelings not much -- a first stage type peregrine falcon -- henceforth, about the motorcycle of a liter SS class, a manufacturer examines a raw material and a production method and hears especially that high rigidity and a weight saving are attained.
Possibly, to this product, a motorcycle may be too good.
Although an appropriate price is carried out about a motorcycle with room to still tamper cheaply, I think that we can recommend you since I think that the feelings of the engine performance are made quite more cheaply than the thing made from titanium.
Since there was also a familiar portion, evaluation was set to 4.
View detail