Reviews
Radiator core guard
Purchased a Radiator core guard made by R&G for a CBR1100XX. To install, the Radiator Shroud was removed and the Core guard was installed. When installing the core guard, the lower bracket for the bolt stop was not aligned, so I cut it out with a grinder. The core guard is not covered in the middle, but it is safe because it does not hit the tip that rolls up from the front tire. View detail
Fits: KAWASAKI Z750S (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI Z750R, KAWASAKI Z750R, KAWASAKI Z750R, KAWASAKI Z250SL, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R
Work
I installed it on a 2021 RC390, but the bolt that came with it did not have the correct pitch, so I used a bolt sold at a local home center.
We purchased this item because we just had the Orange color in stock.
After using it for a while, the color faded due to ultraviolet rays? After using it for a while, the color faded due to UV rays.
I didn't have any problems using it on Jack-up, but if you are concerned about how it looks or when it is left mounted on the car body, you may need to take some measures to prevent it from looking bad.
View detail
Fender extender
This fender extender is good for rainy season. Installation is a bit tricky as you need to do minor adjustment. Don't rely on the double sided tape provided. Drill 4mm holes and use the studs provided. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
demon who obstructs sentient beings from maintaining moral behaviour
The ground penetration was reduced, but not as effective as the price, and eventually they got in the way and were removed after a year or so. View detail
Fits: SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1200
Area0 Height0 Screw×.
In terms of extending the height and area of the Side Stand, it is a very satisfactory product.
However, the included screw is too short and loosens after continued use. Screw locker is recommended.
View detail
Fits: APRILIA RSV4 RF, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA Tuono, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR, APRILIA RSVR
Is M6 still thin?
Installation 3 min.
If only this would make Maintenance easier!
This is the second time I've bought one of these, or maybe the last time, and one of them got bent.
I put it back and it broke.
Is M6 still too thin?
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX)
It does not fit the current model.
It does not fit the current z1000.
Since it's an external exhaust system, I'll bend the bracket a little bit and use the Spacer that's sold at Home Center to get clearance between the Silencer and Swing Arm.
View detail
It looks good, but...
I bought it to protect my Radiator and for fashion.
It looks cooler, but the water temperature is a little higher.
Although a considerable effect can be expected from the viewpoint of protecting Radiator, I think that it is not unreasonable that the cooling effect is sacrificed because the thing which becomes an obstacle is made in the path of the wind.
It may be just right for the coming autumn.
View detail
Fits: MV AGUSTA F4 RR, MV AGUSTA F4 RC, MV AGUSTA F4 RC, MV AGUSTA F4 RC, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4
R&G R And G TailSlider [F4RC]
I bought a Tandem Footpeg Bar.
To protect the rear cowl when riding with two people?
I don't have a ride.
Well, it's all about looks.
The special adhesive is Included Parts:but…
Installed with Double-sided Tape because I was afraid
In the MV AGUSTA F4RC
It's not like Fit as it is.
I'm trying to find a position where I can stick it! I think the correct expression is
View detail
Price
I bought a Titanium color stock on Sale. The color is not Titanium, but bright Gun meta. (Lol) However, it only sticks as it is attached, so you will know immediately. Probably there is no problem functionally, it is only the board gold clasped the amis. View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750
Safe when the ground is soft, such as gravel!
The image in the product description is a Sample!
The item you receive will be the Type in the picture.
A little cheaper would be appreciated w
View detail
Looks sturdy.
Installation takes about 10 minutes, I had to remove the OEM engine mounting bolt with an impact wrench because it was too hard. I tightened the bolts to the specified torque and test drove the car. I'm sure you can get used to it. It looks sturdy, so you can feel confident about the product. View detail
The mount plate needs to be modified for installation.
I bought it for my RVF400 and had it installed by a motorcycle shop.
Although there was no description in the product description that modification is required, it seems that the plate had to be cut off when mounting the mount plate for the Slider support to the Engine.
Since it doesn't come with a pop, it may cost you extra labor.
Cowl did not require any processing as explained, but I think it would be better to mention in the description that the product itself needs processing.
A good point is that the Mount plate does not directly attach the Slider to the Frame or Engine, but instead, the Mount plate bears damage to the Frame and Engine in the event of a fall, which reduces the damage to the Frame and Engine.
View detail
Fits: MV AGUSTA Turismo Veloce 800, MV AGUSTA Turismo Veloce 800, MV AGUSTA Turismo Veloce 800
I can't get it to stick cleanly.
Purchased for the purpose of improving the stability of the vehicle when riding.
The only Knee Pad I could find for the Turismo Veloce is the R&G one.
Because Instruction Manual is not attached, referring to the introduction image of official Page, pasting was done.
The design of this product is Exclusive Design, but it does not seem to be able to cope with the subtle unevenness of the tank, so I could not install it without gaps.
After a few days of pasting, because the part of the gap has gradually expanded, I cut it with scissors and pasted it again so that it may fit the Tank surface as much as possible.
In a normal riding position, you can't reach your knees to the attachment surface, so whether it helps with knee grip is honestly a mystery.
I feel that the price is a bit high for the content.
View detail
Fits: DUCATI HYPERMOTARD1100/S, DUCATI Multistrada 1100/S, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Monster796, DUCATI Monster796, DUCATI Monster796, DUCATI Monster796, DUCATI Monster696, DUCATI Monster696, DUCATI Monster696, DUCATI Monster696, DUCATI Monster696
better safe than sorry
I used it for RSV4.
I bought it and installed it just in case, but it just fits and fastens, so installation is quick and easy.
However, as you tighten the screws, are you putting them on the wrong way? Does the Bolt" protrude from the Slider.
Wouldn't this bend in the event of an emergency and become a secondary disaster?
I have to remove the Wheel now.
The other reason is that the Slider is larger than I expected, and the appearance is more subtle.
I'd better not use it, but I think I'll look for another product.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000
Small
It's pretty Smallish (lol) when I installed it Of course, I don't want to be taken care of, but you won't know how well it works until you roll it
Bolt seems to be somewhat cheesy
Installation is easy, no need to remove the Cowl
The instruction manual is in English
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R
Good stuff, but expensive
When the Side Stand is applied, it is extremely tilted to Left for some reason I bought it because I felt uncomfortable that I didn't feel like I was standing on a stand, I had a good sense of security and accuracy, but it was a bit more Smaller looking is better looking View detail
I'm not at all interested in buying it at list price, but it's a good one
The shape and the Material are ingenious, but it's just Rubber (Vinyl?) Seat It is
I doubt that it costs between $5,000 and $10,000 depending on the product
I happened to get an Outlet item at a super unbeatable price, so I bought it
The product color is "[Color] Clear" However, if you put it on the white body, you can see that it has a slight blue tint to it
To be honest, it's a little disgusting, but it was cheap, so I'll compromise
Unlike products with a warty surface, like Sugar Crystal's Paper File the textured but flexible material, so that the wearer can be rubbed It's not as much of a decrease
Even though it is flexible, it is not as flexible and stretchy as other products, and it is not suitable for applying to curved surfaces It takes technology and environment
If you can't use the Dryer or Heater, you need to work on a day when the temperature is over 20 degrees Celsius Adhesive strength of the product Hardness It won't stick well and it will peel (float) off, losing to
It requires quite a bit of strong pressure dressing, and in my case, the final "The Wooden Grinder I gobbled it up with
There is no problem because it is ZX-10R of the Iron Tank, but the R1 of the Aluminum Tank and TitaniumTank's CBR-RR doesn't do this method
The grip feeling is good, and it's thinner than the warty products, so it doesn't feel uncomfortable
The ultra-acceleration of the liter SS reduces the chance of the body being carried backwards, allowing you to drive aggressively to
One Side is Quantity:It is divided into 1 Set of 3pcs. and the top one, which contributes little to the knee grip Quantity:I didn't understand the purpose of the 1pc. until it was fully accelerated with the sticky down
It was meant to hold on to the Tank between the elbows and the W
View detail
Fits: SUZUKI GSF1250 Bandit, SUZUKI GSX1250FA, SUZUKI GSF650 Bandit, SUZUKI GSX650F
License Plate Light was not included
This time it was not included in the enclosed License Plate Light so in this evaluation.
Installation was easy. Large is durable if you do not care about the details.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
Tool does not fit in tightening of mounting Bolt
It took 4 months for items to arrive.
The thing is Large young than I thought.
As usual this Manufacturer can not read Instruction Manual at English version at all.
There are no pictures, there is only one way to install it by product description.
Swing arm It is possible to tighten only with Socket wrench because fastening part is deep in tightening of Bolt nut when attaching to pivot, hole is limit and Socket does not enter.
Since it can not be helped, it cut it by a fraction of a millimeter.
The rest is Quantity : Pair (for Left and Right) Of Quantity : 2pc. I think that it is slightly high though there is only Set.
View detail