Reviews
Fits: TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE Rx, TRIUMPH STREET TRIPLE Rx, TRIUMPH STREET TRIPLE RS
Genuine R&G Tail Tidy (Fender Eliminator) for Triumph Street Triple R 2016
As with most manufacturers, they put massive fender eliminators on their bikes from factory. Come on, Triumph, it's just too long. It was decided to get a smaller and more functional eliminator and one we went for was the R&G branded one as this would match up nicely with the colour scheme of the bike. Never used a fender eliminator from anyone else now except R&G. They just do them well. I found the part by coincidence really whilst browsing through Webike R&G section. This looked a nice small and neat package so went for it anyway. This was added to my basket and order placed along with some other parts to keep the shipping low and spread out for the whole order. All arrived in 5 days from Japan to the UK. Yes, I suppose I could buy from R&G in the UK but there is relatively no price difference anyway plus, I already had items I wanted to order from Webike anyway. The eliminator or tail tidy as we call them here in the UK was packaged in a R&G box and then Webike packed all my other items in the outer box. Filled with bubble wrap, nothing could get damaged in transit. The tail tidy is a really good looking piece of kit. The paint is smooth and even and there are no sharp sections to catch you out. It is precision made and everything fitted together really easily. It comes with everything you would need for it to be legal on UK roads including the number plate light. The spacing for the indicators is perfect once everything was fitted. Finished in no time, just a couple of connectors and away you go. The harder part was putting everything back together. Very pleased with how the bike looks now with it being so much smaller. Thanks Webike. View detail
Fits: TRIUMPH Speed Triple, TRIUMPH Speed Triple, TRIUMPH Speed Triple, TRIUMPH Speed Triple, TRIUMPH Speed Triple, TRIUMPH Speed Triple R, TRIUMPH Speed Triple R, TRIUMPH Speed Triple R, TRIUMPH Speed Triple R
Genuine R&G Fender Eliminator Kit for Triumph Speed Triple
As with most manufacturers, Triumph put massive fender eliminators on their bikes from factory. Come on, no one wants a long part hanging off the back of their bike like that. It was decided to get a smaller and more functional eliminator and one we went for was the R&G branded one. Never used a fender eliminator from R&G before so this was new territory for me. I found the part by coincidence really whilst browsing through Webike R&G section. This looked a nice small and neat package so went for it anyway. This was added to my basket and order placed along with some other parts to keep the shipping low and spread out for the whole order. All arrived in 5 days from Japan to the UK. Yes, I suppose I could buy from R&G in the UK but there is relatively no price difference anyway plus, I already had items I wanted to order from Webike anyway. The eliminator or tail tidy as we call them here in the UK was packaged in a R&G box and then Webike packed all my other items in the outer box. Filled with bubble wrap, nothing could get damaged in transit. The tail tidy is a really good looking piece of kit. The paint is smooth and even and there are no sharp sections to catch you out. It is precision made and everything fitted together really easily. It comes with everything you would need for it to be legal on UK roads including the number plate light. The spacing for the indicators is perfect once everything was fitted. Finished in no time, just a couple of connectors and away you go. The harder part was putting everything back together. Very pleased with how the bike looks now with it being so much smaller. Thanks Webike. View detail
Genuine R&G Boot Guard Kit for MT10
As you know, if you ride with good motorcycle boots, they do have a tendancy to rub the frame in places. It's just how it is. These boot guards are a perfect addition to help prevent this and also give a good look to the frame in general. Even though you will probably never need for them to be grippy, they are anyway with a kind of sand paper feel about them. I have used R&G products before and they do know what they are doing when it comes to protection. All their products just fit, there is no having to trim anything as they make each kit specific to YOUR bike. As I already had other tank protector in the basket, I added these boot guards. Becasue I had other items in the basket for the order, the courier cost was very good value and spread out over the entire purchase. It is a lot cheaper to have more than one item to ship that having multiple items. EMS fast is the service I used this time. Their delivery is always within a week and this is even the case over a weekend. My order arrived to me in the UK in 5 days flat. All the items in my order were packed really well and neatly inside the outer box. Webike warehouse even seal the box on all the edges so nothing can be lost in transit. The package was also filled with extra bubble wrap in any empty space so there was also no damage from items moving around inside the box. All arrived 100% perfect. These boot guards are nice and flexible and easy to fit, I always mark the guards or what ever protection you against the surface I am going to attach to using a white pencil on various edges. This measn when I come to installing, I know they will be in the right place first time. Probably easier ways but this works for me. The instructions tell you to lightly heat the surface and pad with a heat gun, I found that a hairdryer did a great job as my heat gun was elsewhere. Just take your time and you will be just fine. Very happy with the final result. Brilliant, thank you Webike View detail
Genuine R&G Fender Eliminator for Yamaha FZ8 2015
I have previously purchased a lot of R&G tail tidy's over the years and have only good things to say about them. They look superb and fit great. This was a replacement for the stock OEM Yamaha one that was fitted from the bike being new. No one likes the big tail tidy on that so a lot change them out. I decided to stick with what I know and went for this one by the great brand, R&G.Along with a few other parts, this was shipped with EMS and arrived in 5 days. All the items were well packed and no damage at all during transit.This tail tidy comes with all the fitting you would need and the bolts too. You can see the quality and the tactile finish on it is awesome. The instructions are clear and precise and if you follow them right, you will have no issues at all.Once installed, the rear of the bike looks a whole lot neater. Great product from a great company and handled by Webike, you're the best. View detail
Genuine R&G Tail Tidy for Kawasaki Versys 650 2018
I have previously purchased a lot of R&G tail tidy's over the years and have only good things to say about them. They look superb and fit great. This was a replacement for the stock OEM Kawasaki one that was fitted from the bike being new. No one likes the big tail tidy on that so a lot change them out. I decided to stick with what I know and went for this one by the great brand, R&G. Along with a few other parts, this was shipped with EMS and arrived in 5 days. All the items were well packed and no damage at all during transit. This tail tidy comes with all the fitting you would need and the bolts too.You can see the quality and the tactile finish on it is awesome. The instructions are clear and precise and if you follow them right, you will have no issues at all. Once installed, the rear of the bike looks a whole lot neater. Great product from a great company and handled by Webike, you're the best. View detail
Fender extender
This fender extender is good for rainy season. Installation is a bit tricky as you need to do minor adjustment. Don't rely on the double sided tape provided. Drill 4mm holes and use the studs provided. View detail
Fits: BMW R nineT, BMW R nineT, BMW R nineT, BMW R nineT
Refreshing around the Rear!
The work is not difficult.
Plate assembly under the seat is a little difficult to tighten.
We are satisfied with the design, which highlights the big-bonedness of R nineT!
I think it is total and cost effective.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
R&G Fender Eliminator for Yamaha R1 2013
As with most manufacturers, they put massive fender eliminators on their bikes from factory. Come on, no one wants a long part hanging off the back of their bike like that. It was decided to get a smaller and more functional eliminator and one we went for was the R&G branded one. Never used a fender eliminator from R&G before so this was new territory for me. I found the part by coincidence really whilst browsing through Webike R&G section. This looked a nice small and neat package so went for it anyway. This was added to my basket and order placed along with some other parts to keep the shipping low and spread out for the whole order. All arrived in 5 days from Japan to the UK. Yes, I suppose I could buy from R&G in the UK but there is relatively no price difference anyway plus, I already had items I wanted to order from Webike anyway. The eliminator or tail tidy as we call them here in the UK was packaged in a R&G box and then Webike packed all my other items in the outer box. Filled with bubble wrap, nothing could get damaged in transit. The tail tidy is a really good looking piece of kit. The paint is smooth and even and there are no sharp sections to catch you out. It is precision made and everything fitted together really easily. It comes with everything you would need for it to be legal on UK roads including the number plate light. The spacing for the indicators is perfect once everything was fitted. Finished in no time, just a couple of connectors and away you go. The harder part was putting everything back together. Very pleased with how the bike looks now with it being so much smaller. Thanks Webike. View detail
R&G Tank Grip/Tank Pad for MT10
I really like how my wife's MT09 turned out after adding these to her bike, so figured I would take a look to see if Webike sold the ones for my bike the MT10. Wow, yes they do! I have used R&G myself on a lot of bikes and know how good the quality is and how well they perform. No idea why I never got around to adding these to the bike. I know they are super grippy and an added bonus is that they also protect the tank too. Finding the correct part was super easy, I cross referenced between Webike and R&G website. Simples. I usually have multiple items in my basket as I do use a lot pf parts both on my own bikes, my wife's bike and customers too. Becasue I order a few parts, this cuts the cost of shipping down immensely per item. EMS fast service it what I use these days, they never seem to let you down, even if you have an order that you place mid or late on in the week, the orders always get to me in 4-5 days including weekends. Great for any customer. My order was all packed really well and I secretly think the Webiske warehouse workers are masters at Tetris as they manage to fit parts in when I would expect a larger box. Not only do they fit them in perfectly, they pad everything out so nothing gets damaged in transit. Absolute, stars. The reason I chose these tank grips instead of other brands is because I sometimes do track days and leathers do not grip the tank when you need it the most, regular tank pads basically just protect the tank whilst adding zero grip for your legs and knees. Easy choice. When they arrived, they were even added to a piece of card to keep them nice and flat. Fitting was super easy, I do use a weird method that probably no one else uses though. I test fit them using a small piece of tape and then put a few faint marks on the tank with a white pen (wipes off easily), this way, when I do come to fitting them, I know that they are in the right place and symetrical both sides. If they were not correct, it would seriously mess with my OCD. So, after I have the grips marked out on teh tank, it's just a case of running a heat gun or hairdryer over the grip witht he backing paper on and then a little over the tank which helps with adhesion, Peel a small piece of the back to get you going and then gently remove all the backing and slide onto the tank. Super easy but take your time. If you rush, you will mess it up. Very pleased with my purchase, thank you Webike View detail
Fits: YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer
R&G Tank Grip/Tank Pad for MT09 Tracer
My wife has been asking about tank protection and additional grip as the tank on her MT09 Tracer she says is a little slippery. I have used R&G myself on a lot of bike and know how good the quality is and how well they perform. I know they are super grippy and an added bonus is that they also protect the tank too. So this was a no brainer for me to get her some of these for her bike. We also went for the boot guard at the same time. There were multiple items in my basket so we purchased everything together. Because we had multiple items in the basket, the shipping cost from EMS fast was really good value. This is my go to service of late as they never seem to let me down. I can pretty much guarantee my order will arrive in less than a week. ALl the items in my order were really well packed. There were some parts that were weird shaped and some really small gaskets etc. Everything needed to be packed accordingly and Webike, have this covered. The added bubble wrap to the box and even taped closed the edges of the box so nothing could get in or out in transit. My order arrived in 5 days and all was 100% perfect. These tank grips/protectors arrived nice and flat and ready to install. I would suggest you clean the tank well and use some kind of alcohol based wipe and make sure to remove any residue. Be careful what you use though as you don't want to mess the paint work up before you even start. I usually line up the pads and then have a white board pencil dotted in a few places so I know where everything is lined up. There is probably an easier way, but this method has never let me down yet. The instructions tell you to lightly heat the surface and pad with a heat gun, I found that a hairdryer did a great job as my heat gun was elsewhere. Be aware that these are super sticky so steady as you go. I would say, get it right the first time or you might not get the 100% perfect adhesion. Took about half an hour with measuring and then installing. My wife is now a happy bunny, she even said they make here bike look a little more mean. Great stuff, happy wife equals, happy me. Thank you Webike View detail
Fits: DUCATI Scrambler Icon, DUCATI Scrambler Icon, DUCATI Scrambler Icon
Must-have item.
Remove the mudguards, which are not necessary for the design, and it's back to what it should be!
And I don't ride in the rain!
View detail
Fits: YAMAHA YZF-R125, YAMAHA YZF-R125, YAMAHA YZF-R125, YAMAHA YZF-R125
Simple and SMART Fender Eliminator Kit
I liked the Simple shape and purchased it.
Although it is a 125, it is a member of SUPER SPORTS750, and when replaced, it will tighten up with Race ish.
[How is it used?
I use it on Touring Main, but I don't ride in the rain, so mud splatter is not a consideration.
Was the one you received as per Image?
Yes, it was approximately as per Image.
I love the perfect positioning of the RearSide cowl and the Fender.
The license plate mounting area, number light, reflector, and blinker are positioned in good balance (as expected from Exclusive Design).
Both License Plate and OEMBlinker were installed without any modification.
The mounting points (three screws) of OEM parts are used as they are, so the stability is outstanding.
○ Quantity:Simple and lightweight (approx. 150g) as it is molded from 1pc. aluminum plate
I think the LED number light is cool (about 6,000K?).
Almost everything needed for installation (except for the wiring of the number light and the bracket of the reflector).
BlackEtchingSeal was not included in the Instruction Manual (not because we forgot to include it, but because the Manufacturer decided it was unnecessary?)
The Instruction Manual has 30 pictures of the car body, which helped me understand how to remove and install the car.
Instruction Manual in 3 languages was included, but there was no translation (please type here (as described in Webig)).
In the case of 125cc, the license plate is small, so it is inconspicuous and SMART. (Leave the color aside.)
How was your experience with it?
It has been less than 2 years and about 3,000 km since I installed it.
No damage.
No peeling of paint.
○ No malfunctioning number lights
Quantity:Made from 1pc. aluminum plate, no screws or Rivet will come loose or come off.
So, you can use it for a long time with peace of mind.
[Points to note]
The following is a description of what I noticed about installation and removal.
○ The number light shade and number light are not glued together, so one day they will suddenly split (be careful not to lose them).
Wiring for the number light needs to be modified to Bullet Type Terminaletc. in order to connect the wiring.
○○An ingenuity is needed to attach a Reflector (Bracket and others were added) …2
When removing the Seat Cowl, it is necessary to loosen the screws that hold the Fender Eliminator Kit in place in order to remove the lower push rivet.
How did it compare to other products?
It will be much lighter than the OEM Fender.
And above all, WeBig's conscientious prices are excellent.
I compared it to eBay's Shop before purchasing, but WeBig's price was unbeatable.
I like the Fender Eliminator Kit very much, because it makes the Rear area, including the wiring, look cleaner.
If you don't ride in the rain, I recommend it.
View detail
Fits: TRIUMPH STREET TRIPLE, TRIUMPH Daytona675, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE Rx, TRIUMPH Daytona675, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE Rx, TRIUMPH Daytona675, TRIUMPH Daytona675
Harder than it looks; more effective but also more Wear aggressive
I'm trying to decide which GripSeat to put on my new STREET TRIPLE, I've been using R&G's THRUXTONR and StampGrip on my 959 Panigale for about 3 years now. The photo is of the THRUXTONR by R&G. The R&G is very good for its understated appearance and cosmetics, but a little aggressive on the Wear.
The entire surface is textured and feels like a coarse paper file, rather than gripped by unevenness, so whether it is leather or textile, you must be prepared for damage to the inside of the kneecap of the pants. However, depending on how you ride, the distance you ride, and the material of the pants, the same pair of pants will not wear out to the point of having holes in them even after 10,000 kilometers of riding. As the time of use increases, the sharpness of the surface seems to be removed, and it feels smoother to the touch than it did at the beginning of use, but I do not feel any decrease in gripping force. I don't feel a decrease in gripping force at all, but rather, I feel that it is easier to ride because there is no longer any strange sticking.
If you want to hold the machine firmly with TextilePants, GripSeat is a must.
If you want a reliable effect while blending in with your tank, this is the recommendation.
View detail
Fits: HARLEY-DAVIDSON XR1200, HARLEY-DAVIDSON XR1200, HARLEY-DAVIDSON XR1200, HARLEY-DAVIDSON XR1200, HARLEY-DAVIDSON XR1200
Fits in nicely!
Arrived about 2 months after ordering. I waited patiently, so no problem.
Installation began immediately. It was hot, so we took a break and ate lunch, and completed the installation in about two hours.
An Instruction Manual was included, but it is the English version.
I checked the content with a translation app, but there is nothing special, and if you have electrical and maintenance knowledge, you should have no problem.
The Rear area is now even more handsome with Refreshing.
View detail
Fits: HONDA glom, HONDA glom, HONDA glom
Now has a tidy back end
Very happy with the look of my Honda Grom with the R&G fender eliminator kit now fitted. I am not waiting to change too much on my Grom as I do like the look of this motorcycle but the Honda OEM fender had to go. I chose to purchase the kit that retains the Honda OEM indicators as I prefer larger indicators that other drivers can see easily. The pricing from R&G is high compared to other brands but it does come with all the required parts for a successful installation. Installation was a little dificult at times and I did need a hand from my partner to get it completed. My grom looks great now and the only downside to fitting this part is when you ride in the rain you will have some water from the rear tyre flicking up onto you. View detail
Great product! It's a pleasure doing business with WeBike.
This product took a while since the time I ordered it online since it was not in stock. WeBike informed me about the condition and gave me option to continue the order or to cancel it. I chose to continue the order because I was ready to wait. WeBike informed me recently that the order will come ahead of time and I received it yesterday! Great packaging and communication! Thank you. View detail
Fits: MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4, MV AGUSTA F4-750, MV AGUSTA F4 RR, MV AGUSTA F4
R&G Traction pad (Black) [F4RC]
Knee grip is now easier.
Rubber (PVC) texture is good for the price, and the adhesive is strong and can be reapplied.
I was expecting a cheaper Sponge one, so I was happy with the Large one!
https://ameblo.jp/keikocookingchicken
View detail
Best tank grip
I bought 2 sets in total. One for myself, the other for a friend. The adhesive is strong and with good grip surface. The cutting is like tailor made. Delivery takes some time because it's from England. View detail
Fits: MV AGUSTA Turismo Veloce 800, MV AGUSTA Turismo Veloce 800, MV AGUSTA Turismo Veloce 800
I can't get it to stick cleanly.
Purchased for the purpose of improving the stability of the vehicle when riding.
The only Knee Pad I could find for the Turismo Veloce is the R&G one.
Because Instruction Manual is not attached, referring to the introduction image of official Page, pasting was done.
The design of this product is Exclusive Design, but it does not seem to be able to cope with the subtle unevenness of the tank, so I could not install it without gaps.
After a few days of pasting, because the part of the gap has gradually expanded, I cut it with scissors and pasted it again so that it may fit the Tank surface as much as possible.
In a normal riding position, you can't reach your knees to the attachment surface, so whether it helps with knee grip is honestly a mystery.
I feel that the price is a bit high for the content.
View detail
Fits: HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200
VFR1200F works great.
The VFR1200F has so much windup from the front wheels that the top of the tank is covered in sand when running in the rain.
I drove in the rain soon after putting these on and the sand didn't come up at all.
Modern motorcycles have a shorter front fender back side, so if you're touring in the rain, this is the way to go.
Size is Exactly and it was able to be fixed sufficiently only with double-sided tape.
View detail