Reviews
Fits: BMW R nineT, BMW R nineT, BMW R nineT, BMW R nineT
Refreshing around the Rear!
The work is not difficult.
Plate assembly under the seat is a little difficult to tighten.
We are satisfied with the design, which highlights the big-bonedness of R nineT!
I think it is total and cost effective.
View detail
Fits: YAMAHA YZF-R125, YAMAHA YZF-R125, YAMAHA YZF-R125, YAMAHA YZF-R125
Simple and SMART Fender Eliminator Kit
I liked the Simple shape and purchased it.
Although it is a 125, it is a member of SUPER SPORTS750, and when replaced, it will tighten up with Race ish.
[How is it used?
I use it on Touring Main, but I don't ride in the rain, so mud splatter is not a consideration.
Was the one you received as per Image?
Yes, it was approximately as per Image.
I love the perfect positioning of the RearSide cowl and the Fender.
The license plate mounting area, number light, reflector, and blinker are positioned in good balance (as expected from Exclusive Design).
Both License Plate and OEMBlinker were installed without any modification.
The mounting points (three screws) of OEM parts are used as they are, so the stability is outstanding.
○ Quantity:Simple and lightweight (approx. 150g) as it is molded from 1pc. aluminum plate
I think the LED number light is cool (about 6,000K?).
Almost everything needed for installation (except for the wiring of the number light and the bracket of the reflector).
BlackEtchingSeal was not included in the Instruction Manual (not because we forgot to include it, but because the Manufacturer decided it was unnecessary?)
The Instruction Manual has 30 pictures of the car body, which helped me understand how to remove and install the car.
Instruction Manual in 3 languages was included, but there was no translation (please type here (as described in Webig)).
In the case of 125cc, the license plate is small, so it is inconspicuous and SMART. (Leave the color aside.)
How was your experience with it?
It has been less than 2 years and about 3,000 km since I installed it.
No damage.
No peeling of paint.
○ No malfunctioning number lights
Quantity:Made from 1pc. aluminum plate, no screws or Rivet will come loose or come off.
So, you can use it for a long time with peace of mind.
[Points to note]
The following is a description of what I noticed about installation and removal.
○ The number light shade and number light are not glued together, so one day they will suddenly split (be careful not to lose them).
Wiring for the number light needs to be modified to Bullet Type Terminaletc. in order to connect the wiring.
○○An ingenuity is needed to attach a Reflector (Bracket and others were added) …2
When removing the Seat Cowl, it is necessary to loosen the screws that hold the Fender Eliminator Kit in place in order to remove the lower push rivet.
How did it compare to other products?
It will be much lighter than the OEM Fender.
And above all, WeBig's conscientious prices are excellent.
I compared it to eBay's Shop before purchasing, but WeBig's price was unbeatable.
I like the Fender Eliminator Kit very much, because it makes the Rear area, including the wiring, look cleaner.
If you don't ride in the rain, I recommend it.
View detail
![TankGrip/Tank Pad[Tank Traction Grip]■](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0164/22748664_1_TS.jpg)
Fits: TRIUMPH STREET TRIPLE, TRIUMPH Daytona675, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE Rx, TRIUMPH Daytona675, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE Rx, TRIUMPH Daytona675, TRIUMPH Daytona675
Harder than it looks; more effective but also more Wear aggressive
I'm trying to decide which GripSeat to put on my new STREET TRIPLE, I've been using R&G's THRUXTONR and StampGrip on my 959 Panigale for about 3 years now. The photo is of the THRUXTONR by R&G. The R&G is very good for its understated appearance and cosmetics, but a little aggressive on the Wear.
The entire surface is textured and feels like a coarse paper file, rather than gripped by unevenness, so whether it is leather or textile, you must be prepared for damage to the inside of the kneecap of the pants. However, depending on how you ride, the distance you ride, and the material of the pants, the same pair of pants will not wear out to the point of having holes in them even after 10,000 kilometers of riding. As the time of use increases, the sharpness of the surface seems to be removed, and it feels smoother to the touch than it did at the beginning of use, but I do not feel any decrease in gripping force. I don't feel a decrease in gripping force at all, but rather, I feel that it is easier to ride because there is no longer any strange sticking.
If you want to hold the machine firmly with TextilePants, GripSeat is a must.
If you want a reliable effect while blending in with your tank, this is the recommendation.
View detail
![Fender Eliminator Kit [Tail Tidy (Original Indicators)]](https://global.webike-cdn.net/uiu/impression/202111/12_1019277_618ded736dd92.jpg)
Fits: HONDA glom, HONDA glom, HONDA glom
Now has a tidy back end
Very happy with the look of my Honda Grom with the R&G fender eliminator kit now fitted. I am not waiting to change too much on my Grom as I do like the look of this motorcycle but the Honda OEM fender had to go. I chose to purchase the kit that retains the Honda OEM indicators as I prefer larger indicators that other drivers can see easily. The pricing from R&G is high compared to other brands but it does come with all the required parts for a successful installation. Installation was a little dificult at times and I did need a hand from my partner to get it completed. My grom looks great now and the only downside to fitting this part is when you ride in the rain you will have some water from the rear tyre flicking up onto you. View detail
![Front Fender Extension [Fender Extender]](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0165/22823202_1_TS.jpg)
Fits: SUZUKI GLADIUS650650, SUZUKI GLADIUS650650, SUZUKI GLADIUS650650, SUZUKI GLADIUS650650, SUZUKI GLADIUS650650, SUZUKI GLADIUS650650, SUZUKI GLADIUS650650, SUZUKI GLADIUS650650
I feel good
We arrived much earlier than we were told we would
Installation is done with double-sided tape and four Rivets, but the Rivet I processed it because I didn't want to use
The curvature with Fender was a little different, so I used HeaterGun to adjust the curvature and put it on We used strong double-sided tape on the entire surface to which it is attached
It's still early days after that, so I'm worried, but for now, I'm sticking it out and sticking it out It is
For me, though, I wish it was a little longer if possible
Since it is the same manufacturer as the Radiator guard, Total It's called "coordinate"
View detail
![Front Fender Extension [Fender Extender]](https://global.webike-cdn.net/photo/impression/be/be51a66a783af78f28dec7a2ae35f7ceL.jpg)
Fits: KAWASAKI Z125, KAWASAKI Z125pro
After use in the rain
It has finally rained since it was installed, and the road has been puddled with water
There was no Instruction Manual available
Normally, we drill holes in the Fender and Body and use the included Clip (？) The recommendation seems to be to stop at
I left no holes in the fender when I installed it, and I put the overlapping part of the Normal fender on the 3M outdoor fender It is attached using only double-sided tape
I went through a few puddles and it was much less splashing However, that doesn't mean your shoes won't get splashed, so you should avoid the puddles as a rule
The Double-sided Tape did not come off at about 50km/h
Z125PRO is used for the engine and exhaust pipe in Normal fender If you ride to work, etc. on a rainy day, you may have to install the exhaust pipe If you can agree on the delivery date and price, you can install it
View detail
Fits: SUZUKI GSF1250 Bandit, SUZUKI GSX1250FA, SUZUKI GSF650 Bandit, SUZUKI GSX650F
It is an overseas brand, but it fits like an OEM product
When I used NORMAL, I felt like the area around my rear was a little blurry, so I decided to use Fender I was looking for a Eliminator and I found this product and installed it I'm very happy with the way it looks View detail
![Front Fender Extension [Fender Extender]](https://global.webike-cdn.net/photo/impression/06/06b8d5f26664997306a6b095c26113ebL.jpg)
Fits: KAWASAKI Z125, KAWASAKI Z125pro
For starters, the turnaround time is long!
I bought the Black one because I wanted to get a sense of unity with the Carbon one because it looks fake The strength seems to be strong because it is made of ABS resin The Double-sided Tape which is pasted is a rather thin one of temporary attachment Although the instruction manual was English version, it is a Japanese version i understand the idea of drilling amm hole and stopping it with a push rivet. there were four, but the top I thought it would be more noticeable if I put it on the:Pair (for Left and Right) The Center part is Double-sided Tape addition I feel that dust does not fit a little, but it is within the acceptable range Although use of rain is not yet, because it extended considerably as shown in the picture, does not the use of rain reduce considerably?
This time, I'm not complaining because it was almost a Point purchase, but if you're not in a hurry, go for Sale I think you should buy it; $6,000 is a bit high Subjectively, about $4,000 is a reasonable price
View detail
Fits: KTM 1190 RC8R, KTM 1190 RC8R, KTM 1190 RC8R, KTM 1190 RC8R, KTM 1190 RC8R, KTM 1190 RC8R, KTM 1190 RC8R, KTM 1190 RC8, KTM 1190 RC8, KTM 1190 RC8, KTM 1190 RC8, KTM 1190 RC8, KTM 1190 RC8, KTM 1190 RC8
because it is a foreign product
It interferes with the License Plate Light I made a collar at the installation part of License Plate Light to avoid the interference of Limit Wiring was diverted from the OEMTail lamp View detail
Almost good
It is attached to GSX-R1000R L8.
Reference video
https : / / youtu. be / XrgmumR8ZNE
It took 1 hour and 30 minutes when I noticed the time,
There is no difficult part just by being troublesome.
Although it is an overseas product, Japan's License Plate is also attached.
Speaking of luxury, not diverting NORMAL's Blinker,
I wish I had prepared Small.
View detail
![Front Fender Extension[Fender Extender]■](https://img.webike-cdn.net/catalogue/images/50737/22823203_1_TS.jpg)
Fits: KAWASAKI Z125, KAWASAKI Z125pro
Price is expensive but worth it
I was kept waiting for two and a half months until arrival shipment.
Although the price is high, Fitting is the best for car model only items. I have to open a hole with Drill by myself so I think that it was even better if a hole was opened from the beginning. I think that it is good if the water splash does not exist in the Engine part with this.
View detail
Fits: HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin
With this I can grip Knee grip
Tank is rubbing against Pants and it is white and it is blurred. Knee grip can not do it. So I decided to add Tank Pad.
Alcohol for degreasing is attached. (I do not use it) Because it is a special item Exactly to Tank of Africa Twin. Since the adhesive strength is not so strong it can be repositioned. I think that each person, but the design beside Tank is hidden and I do not want that point a little.
The surface is embossed and it is hard to slip. Because I'm Covering to the former side of Tank, I think whether it is Large durable even if I standing.
With this I will take care of Tank.
View detail
Fits: DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1299Panigale, DUCATI 1299Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 959Panigale, DUCATI 959Panigale
It looks red, but the formation of the cross section is more - - -.
Used for 1299S. I wanted to unify at Tank Pad 's Manufacturer so purchase.
Carbon is quite thick and it seems to be protecting firmly.
It shines in DucatiRed.
However, as for the section of Carbon, although the surface polishing is done, it is conspicuous by thickness as it is as it is.
I wanted you to be careful so far as I will price so much.
Another person also pointed out, but since it is fixed with Seal material, I am worried about peeling off it.
0 pay closed.
View detail
Fits: APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA Factory, APRILIA Factory, APRILIA Factory, APRILIA Factory, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia)
Ordinary Tank Pad
Purchase to not hurt Tank.
It is an ordinary Tank Pad. Design is neither possible nor impossible nor flashy, so it fits any Motorcycle.
I use it together with Stomp Grip to help improve Hold feeling during Wound prevention & Sports driving.
View detail
Fits: SUZUKI GSF1250 Bandit, SUZUKI GSX1250FA, SUZUKI GSF650 Bandit, SUZUKI GSX650F
Made overseas - - - So hey ~
Fender Eliminator for BANDIT
There is only one in FOR JAPAN MODEL Manufacturer
Examining, Manufacturer here is Hit.
Because I am not around, I will try to attach it to the test
I decided to purchase.
Reached the other day, noticing a strange thing just after starting installation
Instruction Manual for 1199 panning - - It was in.
Because it is made from overseas, collectively, take the meaning of watching it
Start work.
Box, making Fender itself perfect.
Removal of OEM and no problem at all.
Position of the hole drunk.
However.
Apart from Fender and License Plate Bracket
Everything for panignale was included.
Of course, Bolt classes required for installation.
I managed to install it with Bolt and Bracket on hand
If it was not, it was supposed to be strange.
It was already after Fender was installed
I could not return it, but I gave it up
I regret to say that things are good.
If possible we can make sure that we will check Big before shipping
Thank you.
View detail
Fits: YAMAHA FZ6, YAMAHA FZ6, YAMAHA FZ6, YAMAHA FZ6, YAMAHA FZ6, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER
R&G Fender Eliminator Kit/License plate holder
【What made you decide the purchase?】
Because it felt that the installation was an easy product
【How was it actually used?】
I was able to install it without problems for work.
[Is there anything I was disappointed about?]
Is it a price if you dare say.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I wanted a low price.
【Have you compared items?】
I did not have much LineUp in terms of vehicle, so I bought it immediately.
View detail
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R
Appearance clear!
Buy to Fender Eliminator
The appearance is refreshing
The making of details is sweet
I asked for installation at Red Baron, but it seems that Screw was short and a bit painful
View detail
The attachment itself has no problem. Since genuine blinker wiring and license wiring are removal in a battery part, it will be needed to decompose all rear cowlI! A license ball becomes LED and a screw stop type is GOOD! Although it is quite small, when
The attachment itself has no problem. Since genuine blinker wiring and license wiring are removal in a battery part, it will be needed to decompose all rear cowlI! A license ball becomes LED and a screw stop type is GOOD! Although it is quite small, when the reflector is also attached and a blinker is made an LED type, it is good to have the adapters. View detail
Since the crevice between a number LGT and a muffler was worrisome, the fender less kit was stuck. I think that attachment can be simply done if attachment follows the procedure which removed normal. However, since the mounting hole of the bolt of
Since the crevice between a number LGT and a muffler was worrisome, the fender less kit was stuck.
I think that attachment can be simply done if attachment follows the procedure which removed normal.
However, since the mounting hole of the bolt of a number LGT was small, it extended with the file.
Moreover, the thing of R&G is only a hole although it is attachment of a blinker, and normal has welded the nut.
The nut of M6 was independently required.
In addition, although it was with number LGT attachment, the number of reflectors with round having actually attached was one.
Although normal is quite heavy in whether it is made of iron, since the thing of R&G is aluminum, it is markedly light.
Although there was also an insufficient portion, since the crevice which was able to stick satisfactorily and was worried had also been improved, it was good.
View detail