Reviews
Fender extender
This fender extender is good for rainy season. Installation is a bit tricky as you need to do minor adjustment. Don't rely on the double sided tape provided. Drill 4mm holes and use the studs provided. View detail
![TankGrip/Tank Pad[Tank Traction Grips]■](https://global.webike-cdn.net/photo/impression/08/0859815b0367ccda7947bbbc4c0a25cbL.jpg)
Fits: MV AGUSTA Turismo Veloce 800, MV AGUSTA Turismo Veloce 800, MV AGUSTA Turismo Veloce 800
I can't get it to stick cleanly.
Purchased for the purpose of improving the stability of the vehicle when riding.
The only Knee Pad I could find for the Turismo Veloce is the R&G one.
Because Instruction Manual is not attached, referring to the introduction image of official Page, pasting was done.
The design of this product is Exclusive Design, but it does not seem to be able to cope with the subtle unevenness of the tank, so I could not install it without gaps.
After a few days of pasting, because the part of the gap has gradually expanded, I cut it with scissors and pasted it again so that it may fit the Tank surface as much as possible.
In a normal riding position, you can't reach your knees to the attachment surface, so whether it helps with knee grip is honestly a mystery.
I feel that the price is a bit high for the content.
View detail
I'm not at all interested in buying it at list price, but it's a good one
The shape and the Material are ingenious, but it's just Rubber (Vinyl?) Seat It is
I doubt that it costs between $5,000 and $10,000 depending on the product
I happened to get an Outlet item at a super unbeatable price, so I bought it
The product color is "[Color] Clear" However, if you put it on the white body, you can see that it has a slight blue tint to it
To be honest, it's a little disgusting, but it was cheap, so I'll compromise
Unlike products with a warty surface, like Sugar Crystal's Paper File the textured but flexible material, so that the wearer can be rubbed It's not as much of a decrease
Even though it is flexible, it is not as flexible and stretchy as other products, and it is not suitable for applying to curved surfaces It takes technology and environment
If you can't use the Dryer or Heater, you need to work on a day when the temperature is over 20 degrees Celsius Adhesive strength of the product Hardness It won't stick well and it will peel (float) off, losing to
It requires quite a bit of strong pressure dressing, and in my case, the final "The Wooden Grinder I gobbled it up with
There is no problem because it is ZX-10R of the Iron Tank, but the R1 of the Aluminum Tank and TitaniumTank's CBR-RR doesn't do this method
The grip feeling is good, and it's thinner than the warty products, so it doesn't feel uncomfortable
The ultra-acceleration of the liter SS reduces the chance of the body being carried backwards, allowing you to drive aggressively to
One Side is Quantity:It is divided into 1 Set of 3pcs. and the top one, which contributes little to the knee grip Quantity:I didn't understand the purpose of the 1pc. until it was fully accelerated with the sticky down
It was meant to hold on to the Tank between the elbows and the W
View detail
Fits: SUZUKI GSF1250 Bandit, SUZUKI GSX1250FA, SUZUKI GSF650 Bandit, SUZUKI GSX650F
License Plate Light was not included
This time it was not included in the enclosed License Plate Light so in this evaluation.
Installation was easy. Large is durable if you do not care about the details.
View detail
Feeling strange
Purchased because it was Sale item of Webike.
It is cheap compared to other similar products - - -.
- The surface feels like a textured pear skin. Grip is not very good.
- Thickness is thinned.
- Since there is no Instruction Manual, there is no choice but to refer to Webike's product introduction image.
- Small Pad pasted on Side cowl is peeled off and floats.
Feeling like that, it feels like a price.
Is it OK as Tank's scratch prevention?
View detail
![Tank Grip Tank Pad [Tank Traction Grips]](https://global.webike-cdn.net/photo/article/39/1460636244639L.jpg)
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M
Is this an overseas Manufacturer?
First of all, we are sorry, we did not buy the item with Bae Wei.
I bought the item before it was written.
However, this review is written so that there is no one who makes the same mistake.
Also please understand that dissatisfied dissatisfaction is applied to the manufacturer.
【What made you decide the purchase?】 Required
Because I felt it was necessary using R6, MT - 07 and Tank Pad. Because I misunderstood it as a product of EasyGrip after seeing product photo.
【How was it actually used?】 Required
Although there is no problem, the effect gets thinner without considering the mounting position.
【Was it difficult to install? (Hard parts case)】
It is not difficult because it is simply removing and doing degreasing.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
Let's thoroughly degrease the mounting surface. Also, considering only the Knee grip at Breaking, there is no problem at the position of the merchandise photograph, but if you expect the hanging on when you get a stuck effect, if you stretch behind like my picture It is high.
[Is there anything I was disappointed about?] Required
Manufacturers "R & G" Although it is a product photo Logo, "EasyGrip" is. I thought that things from product photographs would arrive, but Logo "R & G" Things reached.
I ordered Clear, but when I put it on the lower Black Plastic on the bottom I get White like the photo. This is because the place to paste is not flat and it is uneven - - I understand that it is - - -.
【Hope for Manufacturer - Please let me know if you have any improvement points]
First let me clear the manufacturer.
Clear on the Tank side, Black on the lower side is not as kind as the product.
【Have you compared items?】 Required
Stomp Grip (For R6) EasyGrip (For MT-07)
[Others] Any
I wrote it at the very beginning.
View detail