Reviews
Replaced with a reliable manufacturer's product for future Motorcycle tinkering.
[How is it used?
I used to use a tool sold at Home center, but I was licking the Nut and so on.
We purchased this product as a reliable manufacturer's product.
Was the one you received as per Image?
Matte texture, Laser marking and was as per Image.
How was your experience with it?
The dimensional accuracy is also no problem at all, and it is good to fit Snap to Nut.
Matte texture also fits well in the hand.
How did it compare to other products?
It is a world of difference from the inexpensive tools sold at Home center. A little more.
I regret not buying it earlier.
Requests, etc. to Manufacturer
When the tool box is stored upright, it is unstable because of the protruding hinges,
I would like to see a structure that does not stick out.
View detail
Good texture
[How is it used?
Purchased at the same time as the 65-piece AutoMechanic set from the same manufacturer.
Was the one you received as per Image?
The Matte texture is pleasant to the touch and the Laser marking is very clear.
How was your experience with it?
There is no dimensional error and it fits Snap and Nut so it is safe to use.
View detail
3/8Deep socket
Other than that, it is usually possible to set the Socket to Quantity:I wanted a Deep socket since I have it as a Set. I purchased 6 types of this product for my needs of Size, 8, 10, 12, 14, 17, and 16 (Plug socket). 。 The Bolt and Nut are firmly supported when tightening and unfastening, and I felt a sense of security when using the Bolt and Nut. 。 Also, the size markings are clearly written, so they are easy to read. I just started using it, so I am not sure about its durability, but it is well made, so I do not think it will be a problem. 。 I am very happy with it View detail
Used to disassemble Clutch in LETS4Palette
I bought this because I needed it to loosen the 34mm nut when disassembling the Clutch on the LETS4Palette.
I chose this one because of its high cost performance, and I had no problems with its functionality or strength.
View detail
The stuff is good.
I had left it to the dealers, as I could not see the position of the plug under the tank on recent motorcycles, but I bought it to replace the Eliminator125 plug after a long time.
I chose the one that fits Plug without thinking, but the product precision is excellent and beautiful.
If you fit it directly to the Plug, it goes in easily and with very little play, Wrench is easy to handle.
View detail
Maintenance
Quantity:I was contemplating the purchase of a set tool and it was on sale, so I didn't hesitate to buy it.
The glossy finish gives it a luxurious feel and the display is easy to read.
It is very useful for installation and maintenance of custom parts.
I think Spanner will be sufficient for some work.
The stop Bracket of the lid is easy to come off, so I made it functional Minus 1.
View detail
Size notation is easy to read.
I purchased this for my in-vehicle tools and I really like that Proxxon tools are easy to read with Laser engraved size markings. View detail
Separated into A Parts and B Parts
Recently I have been adding a few more tools to my carryout for Touring. I put in the tools I use most often, but when I have them dispersed, I often have to look for them when I work at home. This time, I decided to purchase Proxxon's Exbur for taking out with me.
Here's a check of what I received. The length is as shown, the weight is 249 grams, and the bar alone is 185 grams. The finish is ChromeMatte, but the surface is not the large grain unevenness to prevent oil slipping. Before I bought it, I thought that the Slide would stop at the end of the bar and could not be completely removed. I thought that the Slide might get in the way when I used it on the X-bar, but if it is removable, it is large and sturdy. However, I thought that I should be careful not to lose the Slide when working on forest roads, etc. without it.
I actually used it with a Socket from another company attached. It was a little hard to remove the socket. The bar is made thicker, so it is heavier, but it is stable even when force is applied. I have been wondering if Exvar and Wrench could share the same functionality since they are similar in shape. It is good for taking out with me because I have four uses:Exvar, T-Type Wrench, normal Wrench, and Size Change Socket. I am glad I chose it because I can use it without any problems.
The size is described in the product description as "Laser processed" so that it can be seen in the dark. I thought the letters would look red in the dark, but they did not. I didn't feel that they looked particularly good in the dark.:Pair (for Left and Right) When the tool is moved to the "M" position, light movement marks are left on the Matte surface. It is natural for the tool mechanism to leave marks on the bar. If you like to polish and decorate your tools nicely, it may bother you. In my opinion, there is no problem as long as the tool is practical.
Proxxon is well known as a manufacturer of Small Type power tools. However, I did not know that Proxxon was a manufacturer in Germany, and that they also manufactured tools for cars and motor cycles. I felt that the standards in Germany might be stricter than JIS when I actually used them. This time, I purchased this tool regardless of the manufacturer because it is a tool that has multiple uses for an ex-bar. I felt that Proxxon should be included in the selection process when purchasing tools in the future.
View detail
Very convenient... ♪
Good cosmetic.
If you have all of these, you will not have any problems with Large bodies.
View detail
Very capable with the combined Machine.
To enhance the on-board tools.
I usually keep my on-board tools in PassportCase in my Pannier,
The Driver was too long and was sticking out of the Case,
Consider something short but with a decent amount of force.
1/4 in rear section (6.3mm) The key is that it is equipped with a socket for
Grip is also square, non-slip and good.
Conversely, it is not suitable for sliding and turning round and round.
It is an on-board tool and for emergency use, so it does not turn a lot of Bolt,
With the additional T-Bar, I can go round and round,
The square pattern prevents it from rolling around and going anywhere.
That is a difference in concept of use, so this is a good thing.
View detail
easy to hold
It is easy to hold.
I had one pc for Wheel for my car but bought this one for Torque management for my Motorcycle.
I usually tighten it with a hand Luc Wrench.
View detail
For Socket
The Driver for the Socket wrench for in-vehicle tools broke, so I bought this to use as a replacement.
The grip and ease of turning are fine, but it is a little larger than I had imagined. I wanted something a little more compact, but it looks sturdy, so I thought this would be fine for use.
View detail
Buy by mistake
[How is it used?
I wanted a 30mm to loosen the Driven Sprocket on my XJR400R, but I was too lazy to buy a 22mm...
I was troubled by the fact that 22mm is not particularly useful.
It's my own fault and I can't help it.
Was the one you received as per Image?
It looked very nice and luxurious.
I am going to use it because it is an opportunity.
[Points to note]
Let's all be careful not to make purchasing mistakes.
View detail
For maintenance.
It was good because it was easy to use for maintenance and servicing and the types of products were well used. View detail
We have it all at Proxxon.
[How is it used?
Proxxon's 65 Points/Auto Mechanic Set 3/8 and wanted Wrench as well, so I bought this one from the same Brand.
How was your experience with it?
I like the slightly rough texture that is typical of Proxxon, and I like the way it feels in my hand.
As for the accuracy, I honestly don't know at my Level.
How did it compare to other products?
As mentioned above, I prefer it to many other plated, smooth, polished ones because it feels better to the touch.
The size and other information are clearly and conspicuously printed, as is typical of Proxxon, so they are easy to read.
[Points to note]
This Case is not very useful for regular use. I would like to find another tool case.
View detail
For polishing in tight spaces
It is good for use in tight spaces or corners where a regular Large size polisher will not fit.
Included Parts:is also very comprehensive and useful for final finishing of painted surfaces in tight spaces.
View detail
unaffected and sober
The Deep socket is solidly built, with a solid and sturdy feel.
It is very effective because Tool is used very frequently.
The Laser-engraved Size indicator is easy to read and provides a high sense of ownership.
View detail
unaffected and sober
The universal joint can be used to reach places that are out of reach of the tool.
If you have it, you can work more efficiently.
The engraving of Laser is subtle.
View detail
strong
It will play a Large active role in a small space.
The quality is very good and luxurious. It is well made and durable.
View detail
As the first Tools Set
I've only had cheap wrenches from Home center for a long time now, so I'm not sure if I'll be able to get a full range of Quantity:I bought this because I thought I should buy a Set.
I had never heard of Proxxon before, but it seemed to be a reliable place and I was able to get a 65 point Quantity.:I thought the price was low for Set, so I decided to go for it.
I'm using it to maintain my CUB, and it's good enough for basic work. The lack of a 23mm socket is due to demand, but it would have been great.
I am planning to stay in touch with you in the future.
View detail