Reviews
Replaced with a reliable manufacturer's product for future Motorcycle tinkering.
[How is it used?
I used to use a tool sold at Home center, but I was licking the Nut and so on.
We purchased this product as a reliable manufacturer's product.
Was the one you received as per Image?
Matte texture, Laser marking and was as per Image.
How was your experience with it?
The dimensional accuracy is also no problem at all, and it is good to fit Snap to Nut.
Matte texture also fits well in the hand.
How did it compare to other products?
It is a world of difference from the inexpensive tools sold at Home center. A little more.
I regret not buying it earlier.
Requests, etc. to Manufacturer
When the tool box is stored upright, it is unstable because of the protruding hinges,
I would like to see a structure that does not stick out.
View detail
Good texture
[How is it used?
Purchased at the same time as the 65-piece AutoMechanic set from the same manufacturer.
Was the one you received as per Image?
The Matte texture is pleasant to the touch and the Laser marking is very clear.
How was your experience with it?
There is no dimensional error and it fits Snap and Nut so it is safe to use.
View detail
3/8Deep socket
Other than that, it is usually possible to set the Socket to Quantity:I wanted a Deep socket since I have it as a Set. I purchased 6 types of this product for my needs of Size, 8, 10, 12, 14, 17, and 16 (Plug socket). 。 The Bolt and Nut are firmly supported when tightening and unfastening, and I felt a sense of security when using the Bolt and Nut. 。 Also, the size markings are clearly written, so they are easy to read. I just started using it, so I am not sure about its durability, but it is well made, so I do not think it will be a problem. 。 I am very happy with it View detail
Maintenance
Quantity:I was contemplating the purchase of a set tool and it was on sale, so I didn't hesitate to buy it.
The glossy finish gives it a luxurious feel and the display is easy to read.
It is very useful for installation and maintenance of custom parts.
I think Spanner will be sufficient for some work.
The stop Bracket of the lid is easy to come off, so I made it functional Minus 1.
View detail
Size notation is easy to read.
I purchased this for my in-vehicle tools and I really like that Proxxon tools are easy to read with Laser engraved size markings. View detail
Separated into A Parts and B Parts
Recently I have been adding a few more tools to my carryout for Touring. I put in the tools I use most often, but when I have them dispersed, I often have to look for them when I work at home. This time, I decided to purchase Proxxon's Exbur for taking out with me.
Here's a check of what I received. The length is as shown, the weight is 249 grams, and the bar alone is 185 grams. The finish is ChromeMatte, but the surface is not the large grain unevenness to prevent oil slipping. Before I bought it, I thought that the Slide would stop at the end of the bar and could not be completely removed. I thought that the Slide might get in the way when I used it on the X-bar, but if it is removable, it is large and sturdy. However, I thought that I should be careful not to lose the Slide when working on forest roads, etc. without it.
I actually used it with a Socket from another company attached. It was a little hard to remove the socket. The bar is made thicker, so it is heavier, but it is stable even when force is applied. I have been wondering if Exvar and Wrench could share the same functionality since they are similar in shape. It is good for taking out with me because I have four uses:Exvar, T-Type Wrench, normal Wrench, and Size Change Socket. I am glad I chose it because I can use it without any problems.
The size is described in the product description as "Laser processed" so that it can be seen in the dark. I thought the letters would look red in the dark, but they did not. I didn't feel that they looked particularly good in the dark.:Pair (for Left and Right) When the tool is moved to the "M" position, light movement marks are left on the Matte surface. It is natural for the tool mechanism to leave marks on the bar. If you like to polish and decorate your tools nicely, it may bother you. In my opinion, there is no problem as long as the tool is practical.
Proxxon is well known as a manufacturer of Small Type power tools. However, I did not know that Proxxon was a manufacturer in Germany, and that they also manufactured tools for cars and motor cycles. I felt that the standards in Germany might be stricter than JIS when I actually used them. This time, I purchased this tool regardless of the manufacturer because it is a tool that has multiple uses for an ex-bar. I felt that Proxxon should be included in the selection process when purchasing tools in the future.
View detail
Very convenient... ♪
Good cosmetic.
If you have all of these, you will not have any problems with Large bodies.
View detail
Very capable with the combined Machine.
To enhance the on-board tools.
I usually keep my on-board tools in PassportCase in my Pannier,
The Driver was too long and was sticking out of the Case,
Consider something short but with a decent amount of force.
1/4 in rear section (6.3mm) The key is that it is equipped with a socket for
Grip is also square, non-slip and good.
Conversely, it is not suitable for sliding and turning round and round.
It is an on-board tool and for emergency use, so it does not turn a lot of Bolt,
With the additional T-Bar, I can go round and round,
The square pattern prevents it from rolling around and going anywhere.
That is a difference in concept of use, so this is a good thing.
View detail
unaffected and sober
The Deep socket is solidly built, with a solid and sturdy feel.
It is very effective because Tool is used very frequently.
The Laser-engraved Size indicator is easy to read and provides a high sense of ownership.
View detail
unaffected and sober
The universal joint can be used to reach places that are out of reach of the tool.
If you have it, you can work more efficiently.
The engraving of Laser is subtle.
View detail
strong
It will play a Large active role in a small space.
The quality is very good and luxurious. It is well made and durable.
View detail
As the first Tools Set
I've only had cheap wrenches from Home center for a long time now, so I'm not sure if I'll be able to get a full range of Quantity:I bought this because I thought I should buy a Set.
I had never heard of Proxxon before, but it seemed to be a reliable place and I was able to get a 65 point Quantity.:I thought the price was low for Set, so I decided to go for it.
I'm using it to maintain my CUB, and it's good enough for basic work. The lack of a 23mm socket is due to demand, but it would have been great.
I am planning to stay in touch with you in the future.
View detail
It's not Magnet style.
[How is it used?
I didn't have a 16mm plug socket, so I bought a Proxxon socket along with a 14mm.
Was the one you received as per Image?
I had a 14mm Socket of the same Brand, so naturally, it was as Image.
How was your experience with it?
Before I started using Plug sockets for non-vehicle tools, I thought, "I'm going to use the Magnet type! However, it is easy to use the Type that holds the Plug with Rubber.
It holds the plug securely, so you don't have to worry about dropping it.
I'm a little worried about the rubber degrading, but I'm not sure how long it will be before I replace the plug.
The size is also laser marked for easy viewing.
[Points to note]
This is the Type that holds the Plug in Rubber, not the Magnet type.
How did it compare to other products?
I used to do my best to replace the 16mm plug with an on-board tool, but it was difficult to do so, so replacing the plug is now much easier.
【Review】
Size notation with Laser marking is easy to see and use Plug socket.
I don't use the plug socket often, and I don't think there's much difference in size between other manufacturers' plug sockets, but the design is good, so it's good!
View detail
Compact quantity for flexible combinations:Set
The quality is high, the Variation is abundant, and if there is only this, it is enough Quantity that it may be good to prepare only Pliers and Hammer.:Set. the Socket does not lick the Bolt, which shows that it is a quality product.
Ratchet's Release is easy because it can be done with a single Red Button.
You can also change the center when you make a T-shape, so you can adjust it when you need to use more force.
The Laser engraved Size display makes it easy to see which Parts can be combined, and it has a high quality feel.
Unfortunately, Case is a cheapskate.
Also, when you want to put it vertically in a warehouse or something, the hinges get in the way and you can't put it vertically.
I can't help it, so I put it in the outer box when I put it away.
View detail
It's perfect for ownership and ease of use!
Until now, I had been borrowing tools from other people, but I was looking for a good tool set to improve the speed of my work.
Proxxon is a brand that can be seen in the home center or something like that, there was an Image of high quality low price brand. The country of production is Germany, the world's leading industrialized country, so I thought it would be safe there too.
Product Composition
It's got 65 points in it. It's perfect. You can do most of the work with this much.
The inclusion of Socket, which removes the Spark plug, is a personal "Well done!" Point。
If I may say so, I also wanted to have another One sizeSmall Ratchet. The Quantity that contains both this Ratchet and Small Small Ratchet:There was also Set, and I had trouble with that one.
Also, MicroRatchet, its Socket set, and Spanner would be perfect! (I'm sure they'll keep adding to it.)
Design:
It is a feature of Proxxon's tools that the size and application are engraved on the socket with laser. However, it is difficult to see because of the reflection of the plating.
On the other hand, the size and shape are written on the dull silver background, which is not shiny, in chic colors like Large.
It is by far the easiest to see. This is (There may not be a Large difference between my Level and yours.) Directly linked to the work speed (I think so.) It is
Ratchet also has a higher GEAR number, making it easier to work with less swing.
I'm generally satisfied with it, but if I had to complain, I'd say that the steel box is noisy, and when it gets scratched, it's easy to see. I'm not sure if it's possible to make it out of a non-Gold material or something.
This one comes with a 2 year warranty from the Manufacturer, so I'm sure it will last a long time. I hope I can use it for a long time.
View detail
A 30mm Socket that seems to have many uses but few of them
[How is it used?
I used it to loosen/tighten the Top cap when Front forkOverhaul on ApriliaRS4 125.
I had 28mm and 32mm on hand, but no 30mm! So I chose the Proxxon, which I have experience using with other Size sockets.
Was the one you received as per Image?
As you can see in the picture. "Thirty. I received a Laser marked Socket of
Matte finish is good because not many other Manufacturer have it.
How was your experience with it?
I was a little worried because the hex of the top cap of RS4 125 is shallow, but I was able to loosen/tighten it without licking.
I'm not sure about the accuracy and quality aspect because of the 30mm and Large fine-grained Size, but it was enough for my needs as I only use it for this work for now.
[Products compared, etc.]
I compared it to KTC and Others toolManufacturer's Socket.
I only used it for this work so it's hard to compare, but as a Sunday mechanic I couldn't really tell the difference.
【Review】
I don't know about the detailed accuracy aspect, but I had no problem using it.
I am satisfied with the price, as it is relatively inexpensive compared to other Manufacturers.
Laser marking in MatteChrome finish is good.
View detail
I like the textured feel of the surface ~.
I bought it for the extension of the Plug wrench. 150mm is a little too long and it hits other parts, and the Torque wrench shifts from the axis center of the Plug wrench. So I bought the shorter 75mm one this time. I haven't used it yet, but I think it's the right size. The surface treatment is textured, and I think that it is easy to use without slipping. View detail
Great quality.
The 10mm deep socket is very effective for maintenance and custom use, and the laser engraved size indicator is very cool and high quality. View detail
Surprisingly high quality!
I was curious about it before. I bought it because it was Sale this time. It is a large strange good tool in the feeling of use and the texture as well as Wrench set of the purchase before. I used it as soon as possible, but Quantity:Since there are Socket and Hexagonal Wrench in Set, this Quantity:I'm happy with the Large variant because I can make it with one Set. I also like the fact that 3/8 is enough for the small part of Motorcycle. The rest is durability! View detail
Inexpensive and stylish Spark plug socket
I used it for Plug replacement of YamahaYZF-R1.
Because of the Plug of 14mm which is not so common, the kind of Socket was not many, and as a result of examining it variously, I bought this product.
The deciding factor in the purchase
Initially it thought that it would make Plug socket of the Magnet type, and it had put the Plug socket of Mr. SANKEN in the shopping basket, but when it had done for a while, it seemed to become the lack of goods, and it became impossible to buy.
When I thought what I should do and examined again, I found this Plug socket of Mr. Proxxon.
I decided to buy it because the price is cheap and it is a famous manufacturer that I often see in Home center.
Impressions of use
Because it was not written in the product Page properly and the product which there is also no Review of the other person, it was worry, but this is Type which holds Plug by Rubber being contained in the inside.
I used a Type other than Magnet for the first time, but I thought this was more stable and easier to use for my work.
The accuracy is perfect and it's very easy to use.
Products compared
I compared it with DAYTONA's Plug socket and other Manufacturer's one.
It was inexpensive, a solid manufacturer, and I liked the picture of the Plug marked on the Socket.
【Review】
It's inexpensive, it's accurate, it's stylish, and I highly recommend the Socket!
The tools are from RoseRose's Manufacturer, but Proxxon's Quantity:There is a 14mm plug socket in the Set tool, so if I had bought that from the beginning, I would not have had to buy a new tool every time.
View detail