Reviews
He's a guy who doesn't get to do much at all, but he's a guy you can count on in a pinch.
[How is it used?
I bought it a few years ago, but kept it almost exclusively in my toolbox.
Was the one you received as per Image?
It looks like Germany.
How was your experience with it?
The Grip is easy to grip and apply pressure, and the Bit is accurate and easy to use.
The variety of Bit is just so rich and fun to look at, including some that I've only seen used in cell phones and European products.
However, even though there are many different types, in the case of Japan cars, there are not so many different types of screws that can be used to change the Bit so often, so it is not used in daily use at all. (Lol)
However, when I was replacing the Tandem Footpeg on my ZrX1200DAEG, I had to remove the C-Clip that holds the pin in place, but the standard MinusSize was too large to fit in the groove, and the Precision Driver was too small. But with this Quantity:I managed to remove the Clip with the Minus 3 Size that was included in the Set, which was very helpful! (Lol)
[Points to note]
There was no instruction manual, and the method of fixing the bit to the socket holder was of a different type than that of the JAPAN products I have experienced, so it took some time.
How did it compare to other products?
I compared it to other manufacturers such as ANEX, but the variety of bit types was unusually large, and it was the best.
View detail
It's not Magnet style.
[How is it used?
I didn't have a 16mm plug socket, so I bought a Proxxon socket along with a 14mm.
Was the one you received as per Image?
I had a 14mm Socket of the same Brand, so naturally, it was as Image.
How was your experience with it?
Before I started using Plug sockets for non-vehicle tools, I thought, "I'm going to use the Magnet type! However, it is easy to use the Type that holds the Plug with Rubber.
It holds the plug securely, so you don't have to worry about dropping it.
I'm a little worried about the rubber degrading, but I'm not sure how long it will be before I replace the plug.
The size is also laser marked for easy viewing.
[Points to note]
This is the Type that holds the Plug in Rubber, not the Magnet type.
How did it compare to other products?
I used to do my best to replace the 16mm plug with an on-board tool, but it was difficult to do so, so replacing the plug is now much easier.
【Review】
Size notation with Laser marking is easy to see and use Plug socket.
I don't use the plug socket often, and I don't think there's much difference in size between other manufacturers' plug sockets, but the design is good, so it's good!
View detail
Just right for my first Custom!
I've always left everything to the motorcycle shop and didn't have any tools that looked like tools.
I bought a new car this time, so I thought I'd do some customization and maintenance myself.
I had to get the tools first, I thought.
I was at a loss as to what kind of tool to choose and how much to buy.
This tool, which happened to be a Campaign/Sale item, is one of our recommended products.
And it seemed like a reliable Manufacturer. [Contents] It also seemed to have a full range of
Best of all, I bought it because it was cheaper at a Sale price!
It's been half a year since then, and I've been making my own customizations little by little, and every time I do, Large changes have helped.
Especially, the special shape of Socket is used to relocate Helmet holder.
Quantity:It helped that it was in Set.
You were right to buy it.
View detail
Compact quantity for flexible combinations:Set
The quality is high, the Variation is abundant, and if there is only this, it is enough Quantity that it may be good to prepare only Pliers and Hammer.:Set. the Socket does not lick the Bolt, which shows that it is a quality product.
Ratchet's Release is easy because it can be done with a single Red Button.
You can also change the center when you make a T-shape, so you can adjust it when you need to use more force.
The Laser engraved Size display makes it easy to see which Parts can be combined, and it has a high quality feel.
Unfortunately, Case is a cheapskate.
Also, when you want to put it vertically in a warehouse or something, the hinges get in the way and you can't put it vertically.
I can't help it, so I put it in the outer box when I put it away.
View detail
It's perfect for ownership and ease of use!
Until now, I had been borrowing tools from other people, but I was looking for a good tool set to improve the speed of my work.
Proxxon is a brand that can be seen in the home center or something like that, there was an Image of high quality low price brand. The country of production is Germany, the world's leading industrialized country, so I thought it would be safe there too.
Product Composition
It's got 65 points in it. It's perfect. You can do most of the work with this much.
The inclusion of Socket, which removes the Spark plug, is a personal "Well done!" Point。
If I may say so, I also wanted to have another One sizeSmall Ratchet. The Quantity that contains both this Ratchet and Small Small Ratchet:There was also Set, and I had trouble with that one.
Also, MicroRatchet, its Socket set, and Spanner would be perfect! (I'm sure they'll keep adding to it.)
Design:
It is a feature of Proxxon's tools that the size and application are engraved on the socket with laser. However, it is difficult to see because of the reflection of the plating.
On the other hand, the size and shape are written on the dull silver background, which is not shiny, in chic colors like Large.
It is by far the easiest to see. This is (There may not be a Large difference between my Level and yours.) Directly linked to the work speed (I think so.) It is
Ratchet also has a higher GEAR number, making it easier to work with less swing.
I'm generally satisfied with it, but if I had to complain, I'd say that the steel box is noisy, and when it gets scratched, it's easy to see. I'm not sure if it's possible to make it out of a non-Gold material or something.
This one comes with a 2 year warranty from the Manufacturer, so I'm sure it will last a long time. I hope I can use it for a long time.
View detail
A 30mm Socket that seems to have many uses but few of them
[How is it used?
I used it to loosen/tighten the Top cap when Front forkOverhaul on ApriliaRS4 125.
I had 28mm and 32mm on hand, but no 30mm! So I chose the Proxxon, which I have experience using with other Size sockets.
Was the one you received as per Image?
As you can see in the picture. "Thirty. I received a Laser marked Socket of
Matte finish is good because not many other Manufacturer have it.
How was your experience with it?
I was a little worried because the hex of the top cap of RS4 125 is shallow, but I was able to loosen/tighten it without licking.
I'm not sure about the accuracy and quality aspect because of the 30mm and Large fine-grained Size, but it was enough for my needs as I only use it for this work for now.
[Products compared, etc.]
I compared it to KTC and Others toolManufacturer's Socket.
I only used it for this work so it's hard to compare, but as a Sunday mechanic I couldn't really tell the difference.
【Review】
I don't know about the detailed accuracy aspect, but I had no problem using it.
I am satisfied with the price, as it is relatively inexpensive compared to other Manufacturers.
Laser marking in MatteChrome finish is good.
View detail
I think it's solid for a dedicated Mini Vice.
Micro/Milling Table MF70 (PROXXON item number:27120) I bought it for.
It is also used as Mini Vice with Single Body, and the looseness after sandwiching with Small Type is not seen now.
It is also used for simple electric Drill hole drilling and Tap cutting.
It is very useful.
View detail
○
I used to use the ones I had at home, but there were some Size that I didn't have, so I bought them.
It gives me a sense of ownership and motivates me to use it for Beauty!
View detail
I like the textured feel of the surface ~.
I bought it for the extension of the Plug wrench. 150mm is a little too long and it hits other parts, and the Torque wrench shifts from the axis center of the Plug wrench. So I bought the shorter 75mm one this time. I haven't used it yet, but I think it's the right size. The surface treatment is textured, and I think that it is easy to use without slipping. View detail
Great quality.
The 10mm deep socket is very effective for maintenance and custom use, and the laser engraved size indicator is very cool and high quality. View detail
High quality.
The universal joint effect allows you to work efficiently even in places where straight tools cannot reach. View detail
Convenient and effective
This is a great tool for those situations where the grip is too tight. The Matte finish is high quality and durable. View detail
Good content
From sockets and torques to plug wrenches, we have all the sizes you need to maintain your motorcycle, and with our special discount we were able to save you money compared to buying them separately.
The quality and feel of the product is good and it was a good purchase.
View detail
Excellent stuff.
[How is it used?
Currently in use.
Was the one you received as per Image?
As per Image.
How was your experience with it?
This tool is a combination of Swivel, Ratchet and Spinner with a long handlebar for high torque. The long handlebar makes it possible to apply a high torque, and the ratchet is surprisingly fine, so it is very convenient for use in tight spaces.
For example, it is frustrating to use the Spinner to loosen a bolt that has been coated with an anti-loosening material such as Bar End, because you can't turn it by hand, but this tool frees you from that frustration.
The rotation switch is the same as Right rotation by turning SelectorRight and Left rotation by turning Left, so it's easy to understand.
The only disappointing part is that the Selector is getting a little rusty.
[Points to note]
The ability to apply high Torque is appealing, but if you overload the Ratchet GEAR too much, it will break, so it's not suitable for unusual uses such as stepping on it with your foot or using an iron pipe.
How did it compare to other products?
There was no similar product, so I chose this one.
Other items that would be helpful
Opinion and request to Manufacturer:I don't know how much Torque it can withstand, so I would like to see the Torque load capacity listed.
View detail
Surprisingly high quality!
I was curious about it before. I bought it because it was Sale this time. It is a large strange good tool in the feeling of use and the texture as well as Wrench set of the purchase before. I used it as soon as possible, but Quantity:Since there are Socket and Hexagonal Wrench in Set, this Quantity:I'm happy with the Large variant because I can make it with one Set. I also like the fact that 3/8 is enough for the small part of Motorcycle. The rest is durability! View detail
Works in tight spaces
It doesn't play a big role in Motorcycle maintenance, but it is quite useful in car maintenance.
If you turn the Grip, the Socket turns, so you can use it where there is no room to return the bar.
It's too heavy and GEAR hard to use as a regular Ratchet.
View detail
Inexpensive and stylish Spark plug socket
I used it for Plug replacement of YamahaYZF-R1.
Because of the Plug of 14mm which is not so common, the kind of Socket was not many, and as a result of examining it variously, I bought this product.
The deciding factor in the purchase
Initially it thought that it would make Plug socket of the Magnet type, and it had put the Plug socket of Mr. SANKEN in the shopping basket, but when it had done for a while, it seemed to become the lack of goods, and it became impossible to buy.
When I thought what I should do and examined again, I found this Plug socket of Mr. Proxxon.
I decided to buy it because the price is cheap and it is a famous manufacturer that I often see in Home center.
Impressions of use
Because it was not written in the product Page properly and the product which there is also no Review of the other person, it was worry, but this is Type which holds Plug by Rubber being contained in the inside.
I used a Type other than Magnet for the first time, but I thought this was more stable and easier to use for my work.
The accuracy is perfect and it's very easy to use.
Products compared
I compared it with DAYTONA's Plug socket and other Manufacturer's one.
It was inexpensive, a solid manufacturer, and I liked the picture of the Plug marked on the Socket.
【Review】
It's inexpensive, it's accurate, it's stylish, and I highly recommend the Socket!
The tools are from RoseRose's Manufacturer, but Proxxon's Quantity:There is a 14mm plug socket in the Set tool, so if I had bought that from the beginning, I would not have had to buy a new tool every time.
View detail
It's a tool I feel I own!
I bought this for a Custom installation on my New Model Grom.
I used to use a tool that cost about $4,000, but when I loosened the Bolt on the Socket, the Bolt licked and so on, so I bought this product recommended by Webig.
It's easy to use, it's Laser marked, and the Case is made of steel, giving it a solid, possessive feel!
View detail
To put the final touches on tight spaces.
The included parts:a wide range of products that can be used to apply the finishing touches to painted surfaces in confined spaces. View detail
Available in a variety of sizes.
Compact and convenient to carry, the size is enough for me. I always have it for the time of trouble because most of the installed Rear Sets are also hexagonal. View detail