Reviews
Can be used without problems
This is the first Chain Tool I bought, so I can't compare it with others, but I had no problem using it.
Since the cast surface of the Gold genus is intact, it is likely to rust the next time it is used unless it is treated against rust after use.
View detail
Spring hook
It is used for spring removal and attachment of the Exhaust System.
The Type is a little long, so it seems to be easy to apply force when pulling, but in some places the long length gets in the way and makes it hard to work with.
It is good that it can be split into two parts, can be removed, and can be pulled by swinging it at an angle, but it turns too much and cannot be pulled properly, making it difficult to install the spring hook.
View detail
Oil change
Used when injecting gear oil.
The Bellows one that comes with the Oil is fine, but this one seems better for Oil injection because it can be shrunk with Silicon and the angle is easier to work with.
It is not used that often, but it is an expensive product, so if you have 1 pc. you can use it for various purposes.
View detail
Preliminary Fuse
Quantity for spare Fuse:This selling price for 1 Set of 3pcs. is inexpensive, which is helpful. I don't think I will use all of them. View detail
Preliminary Fuse
When I exchanged Main's Harness for Other Brand Product, it was a MINI flat type, so I bought it as a spare.
The price is reasonable and Quantity:1 Set of 3pcs. so I don't think I will use all of them, but it is worth having.
View detail
Connection
It is used for redoing Wiring.
Just Right Quantity:It was just the right number of pieces to reASSY in a set.
View detail
Convenient
Usable as normal. I bought it for measuring Fork oil. I think it is good to have several of them. View detail
For cleaning.
I bought it because it seems useful for cleaning carburetor and for cleaning tight places.
Quantity:1 Set of 5pcs. so it can be used in different places, which seems convenient.
View detail
Spare
I seem to have shorted it when replacing Blinker's Relay, so I bought this for a spare.
Quantity:1 Set of 3pcs., The selling price was very reasonable.
View detail
If it were a little cheaper, there would be a reason to choose it.
[How is it used?
Purchased for storage and maintenance of Dual PurPass vehicles.
I already have a Lift Stand made by DRC, but I bought an additional one because I use it for storage of another vehicle in my garage. I'd like to compare it with the DRC one.
Was the one you received as per Image?
I don't know which Manufacturer was the first to market this type of product, but I think DRC is the MAJOR MANUFACTURER in the STAND of LiftType with Damper? I think so.
PROTOOLS' Lift Stand is a "DRC+AstroPRO Ducts÷2" The product is functional and just like the Image, although there are some parts where the system is a bit....
Was the installation difficult?
The body and lever part, which is lifted by the principle of leverage, arrive in the box in a pre-installed state, so after opening the box, the body is assembled with two Bolts & Nuts.:Pair (for Left and Right) Bolt did not go into Smooth due to a subtle Gap in the
I used a round bar File to slightly enlarge the hole, but I think this is an individual difference, so I don't think all products have gapped holes.
How was your experience with it?
The vehicle is almost vertical and stable after lift up with less rattling at the props than with DRC products.
Since it has only been a short time since we purchased it, we have not experienced any Damper gas loss, and there is no functional inferiority compared to DRC products, and we hope that the performance will be maintained for as long as possible.
The rubber mats on the ceiling, which are grounded to the vehicle, are fixed to the top panel with thicker Rivet, but in terms of visual quality, they are inferior to those made by DRC.
[Was there anything that disappointed you?
I don't think it is a disappointment, but the paint on the lever part of the leverage is easily peeled off, so it might be better to handle it carefully, apply protective tape, or repaint it, as the base is exposed when it is raised and lowered roughly.
Other items that would be helpful
Point and hang of installation
If each moving part is thoroughly greased up before use, wear and force on moving parts can be reduced, so it is a good practice.
Quantities like the one I purchased:Pair (for Left and Right) Even if there is a gap in the screw hole of a screw, it is easy to rework it, so do not panic and check each part after temporary assembly.
[Availability and clarity of the Instruction Manual
It contains only a very simple installation instruction manual like a memo, but I think it is an easy-to-understand product for its intended use.
[Notes]
When lifting up, use the carBoth Sides of the car where the ground surface is as flat as possible.
Lifting up on an uneven surface can cause the vehicle to become unstable and fall over, damaging or injuring the motorcycle.
Also, be sure to lock the lock lever after lifting up.
Please make sure to check the lock to avoid the risk of accidentally touching the lever of the leverage part and causing the motorcycle to come down.
[ITEMS TO BUY TOGETHER
If you do not have Grease as a maintenance tool, purchase cheap Grease and apply it to the moving parts during assembly.
[Opinions and requests to Manufacturer
To be honest, there is not much price difference between this product and the one made by DRC. "Sell" If you pay a little more Gold, a real (?) DRC will replace it. If you pay a little more Gold, you can replace your DRC with a real (?) DRC.
I would not say half the price, but a price about 4,000 yen lower than that of the DRC product would be attractive enough.
View detail
Common Chain brush
The three-sided type from various manufacturers.
Brush. I used to use it before.
If the Cleaner bounces on the Wheel or
You have to do it twice or you have to worry about the order.
I can't wash my car and now I don't have enough Space for washing my car.
I use Tooth Brush because I can't do it.
I wash the whole car body at once and hose water.
I can use it! I think it would be very useful in situations where
The opposite is Straight's Brush, which I don't know how to use.
I didn't know what to do, so I stabbed it from under the Chain, and the gap hardened.
I used to use it to get dirt off of them, but as a result...
Seal was also hurt to shreds, so that's how I used it.
No recommendation…w
View detail
Type, with its neck bent in a squishy way.
Snap and Type, which breaks the neck without a sound.
The Grip is thick and the Red colored Lock button is quite stiff.
View detail
If you use the Rear stand alone, it's a must!
I use several of the same STAND, but Large is convenient.
Can also be used for 21-inch Wheels if forced.
The slender Tire falls over, so a rearward Jack-up or Lift-up is immediately necessary, but if you understand the precautions, it is a Large-change convenient Clamp.
The CHINA packaging arrived with the STAND exposed upon delivery.
Points will be deducted for numerous scratches and color peeling.
View detail
Common Chain brush
[How is it used?
I use it to clean the Chain on my road motorcycle.
Was the one you received as per Image?
It is a common Chain brush as shown in the Image.
How was your experience with it?
I was a little worried about damaging the Seal.
For the 3-sided Brush portion, one side floated on 530Chain.
Brush width can be adjusted to match Chain size! so I will try to adjust it next time.
But not at the height of Brush. "width" So I wonder if it doesn't make much sense or not.
I haven't found much use for the long Brush at the end of the handle (laughs).
How did it compare to other products?
I used to use a 3-sided Chain brush from another Manufacturer, but there is no difference.
The only difference is the color.
View detail
It can be used, but only in Large size.
Cost performance is sufficient. However, care should be taken when using it on heavy motorcycles. The clearance of the support part is large, so it will be slightly slanted. We own an NSR250R and an NSR50, and it can be used for both. Both vehicles are lightweight, so even if it is skewed by hand, it can be corrected. View detail
It can be used normally
It is easier to be an Overhaul of Fork.
It is not expensive and you should have it.
The quality is pricey, but it's good enough to do what I want to do.
I have no problem at all with this product.
View detail
Can't clean even the smallest part. The bristles are hard and may damage the seal.
[How is it used?
For cleaning the chain of Ninja 400.
How was your experience with it?
The bristles are harder than I imagined, and if you scrub with too much force, you might hurt the seal. I can't go into the detail like the tooth brush, so I can only clean roughly.
After using it a few times, I came to the conclusion that it was the strongest tooth brush after all, and I had it sleep in the warehouse.
Chain is just a rough cleaning! I don't use it anymore. I don't use it anymore because I want to keep it as clean as possible.
[Points to note]
As mentioned above, the hair is hard, so it's best not to scrub too much.
How did it compare to other products?
The bristles are a lot harder than the typical shoe brush-like ones that come with Chain cleaner.
[Opinions and requests to Manufacturer
It might be nice if they made the bristles a little softer.
View detail
For Sunday work.
Purchased for Sunday work outside of Motorcycle.
It is also very useful for weeding.
View detail
Cheap is justice
Basically, this is what I wrote in PROTOOLS Professional tools Bullet Terminal Male.
Are there people who have different Impressions in Male and Female?
If I had to say, I'd say that Female is the larger of the two, so it's easier to pick up.
Please add a section for pinchability to the detailed evaluation and such.
[How is it used?
I need it for Wiring teasing, so I decided to stock a lot of it anyway and came across this product.
Was the one you received as per Image?
It was as shown in the Image. Conversely, is there a Pattern that is not as Image?
I didn't count it, but it seemed to have a volume of 100 units.
How was your experience with it?
If there is an impossibility, it is Large strange, but there is also no impossibility.
How did it compare to other products?
Bullet TerminalQuantity, which used to be included when you bought Electric Works Pliers made by Emon.:I was using Set.
I'm not sure if this is a good thing or not, but I think it's a good thing.
Still, I appreciate the price for 100 pieces.
I will buy the next one.
[Points to note]
Even if it is the same 4mm size, it may be a little loose when you try to connect with other company's Bullet Terminal.
If you can afford LEAD lines, you might want to unify them with those made by Professional tools.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Items to buy together
Electric Works Pliers. On the contrary, why did I buy it without this?
View detail
I was attracted by the price.
[How is it used?
I need it for Wiring teasing, so I decided to stock a lot of it anyway and came across this product.
Was the one you received as per Image?
It was as shown in the Image. Conversely, is there a Pattern that is not as Image?
I didn't count it, but it seemed to have a volume of 100 units.
How was your experience with it?
If there is an impossibility, it is Large strange, but there is also no impossibility.
How did it compare to other products?
Bullet TerminalQuantity, which used to be included when you bought Electric Works Pliers made by Emon.:I was using Set.
I'm not sure if this is a good thing or not, but I think it's a good thing.
Still, I appreciate the price for 100 pieces.
I will buy the next one.
[Points to note]
Even if it is the same 4mm size, it may be a little loose when you try to connect with other company's Bullet Terminal.
If you can afford LEAD lines, you might want to unify them with those made by Professional tools.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Items to buy together
Electric Works Pliers. On the contrary, why did I buy it without this?
View detail