Reviews
Convenient with Angle Difference Attachment !!
I always used Radio pliers to detach E Ring
I have experienced losing and dropping peaking many times
I bought a special tool this time.
Usability is a good feeling. Set of angle difference of Attachment is also
It was really useful and I did Big!
Price is also cheap Recommendation!
View detail
Chain adjustment is easy.
With adjustment of Chain line Quantity : Pair (for Left and Right) It is rather troublesome to match,
It takes a tremendous amount of time to stick to it.
(It has nothing to do with the model of PRO ARM or EccentricShaft)
However, with this tool you can adjust it straightforwardly in a short time.
There is Cover on top of Chain, no car type with no space (Also our GSX-R1000) It is
It is necessary to remove Cover and adjust it,
Removal time (time) Even if you compare the time without using this tool
It seems better to use this tool surely.
View detail
It might be unexpected
I purchased it for trial shipping adjustment.
I betrayed expectations in a good way.
It can be used quite well.. The sense that we did not expect increased the sense of profit. Even if I do not last long, it can not be helped at this price.
View detail
To drive and remove Wheel Balance Weight
PROTOOLSBalance Weight Hammer is used for Tire exchange to remove OEM's driven balance weight.
Because it is for Motorcycle, since the width of the part that grabs the weight is about 2 cm and it is Small, it is easy to use.
Weighing measured at 436 g, there was a response, Grip's Red Vinyl Cover also slid and gripped feeling well.
Also, on the Grip side of Joint, there is a blade that can cut pasted Plate Weight.
The part of Hammer that drives Weight has a rounded and bulged shape from the center, and it is considered that it is hard to scratch the surrounding Wheel when driving Weight.
The other day, we used ZYR 1400 Tire to remove Weight when exchanging, Balance was pasted Weight.
However, the weight attached to Rim stands out (It may be a matter of concern) Since it can not be helped, I am planning to change it to the driving weight of the OEM soon.
Personally, it is very useful.
View detail
To prevent scratches on the ground surface, to prevent falls
Orange color is noticeable.
Material imagines soft and soft material
I was doing, but it's quite hard
It was resin..
Side Stand tip attached to the car body
It is wider than the ground plane
Asphalt is softer than gravel
You can use it without sinking even on the ground.
Groove is also cut on the back side, and it is hard to slip
I think that processing has been done.
There is a hole in Body,
I do not understand how to use it.
Perhaps, using that hole
String etc.. Forgotten to prevent using ...
When used to some extent, at what position
Although it is easy to understand whether STAND can be multiplied,
It took a while to get used to it.
Rather than overturning on the road,
If you have one
"I will not die ..." To STANDPAD
It may be!
View detail
Actually it is a bit different ...
Originally used for Clutch of Honda Mini bike, GSX-R1000 (K3 / K4) Swing arm pivot Nut.
Service manual was instructed to use special tools, which was also expensive (Surely over 5000 yen) Because it was profitable.
It is a tool to be used by connecting to Socket wrench and so on, but be careful. In ordinary Ratchet wrench you need to use Extension bar etc..
View detail
Not available
【What made you decide the purchase?】
I wanted to put Oil in the wire efficiently and purchased it.
【How was it actually used?】
It's the worst. Oil does not enter at all.
[Is there anything I was disappointed about?]
Oil does not enter, all leaks
【Hope for Manufacturer - Please let me know if you have any improvement points]
Everything is bad
【Have you compared items?】
There is none.
[Others]
I will not buy it again.
I only had to remove the wire and lubricate it.
View detail
Speaking of easy handy
I usually use Maintenace Stand, but since I made it damaged from a slight carelessness, I tried purchasing this item I was curious as before as a connection until I repurchase.
According to the conclusion, it is like the price is suitable.
I think how to compare it with Maintenace Stand, but again it is very heavy to turn the Tire and the workability is not very good.
Also, as the other people say, the position shifts while turning the Tire, so stand up the car etc etc. We need some kind of countermeasure.
However, it does not take up space for storage and does not Lift Motorcycle, so there is almost no Risk to overturn accidentally, and Merit says that prices are cheaper than anything.
However, if it was not discounted and sold at fixed price, I think that you should buy Maintenace Stand from here ...
If you are ChainMaintenance who moves the body forward and backward, I think that it may be good to try purchasing it once.
This time, only rear. I used it for Front, but I would like to use it later.
View detail
Under DAEG's Side Stand (During Touring)
Material is thick and solid.
It can be taken without problems if the weight of DAEG is around.
Small Type - lightweight (Male palm slightly larger Large) Because it is convenient to carry in the outside Pocket of Bag.
Gravel parking lot (Gravel or Small Stone?) I used it but I was not dissatisfied at all.
View detail
Valve stem seal
I bought this product to replace the Valve stem seal because it caused the Oil of the cd 90 to descend. The deciding factor is the price is cheap. I am satisfied with ease of use and cheap price. It can be said that it is an essential item for a 4mini ride. View detail
The position of Drain bolt is effective for special Motorcycle!
I bought it for Oilfor Replacement of YAMAHA SR 400.
Oil of SR is Dry scattering type, so when removing Oil, Main is pulled out from Oil drain of Front Frame, but Oil remaining in Oil pan needs to be pulled out as well.
However, when setting up the Center Stand and accessing the Oil drain bolt, the installation is sideways, and because of the positional relationship with Center Stand, I felt it was difficult to use it with a general circular object.
So I purchased this PROTOOLS Compact Oil Drain Pan!
It was introduced as Scooter and Small Type for Vehicle, but the capacity is 2. With 68 L, Oil Capacity 2 of SR 400. It was decided that it was enough for 1 L.
Size is also Exactly, it fits in the gap of Center Stand, and it seems to be active in the future Oil replacement work.
Actual size is outside, height 40 cm, side 23 cm, height 7. 5cm. The inside is a deep place where Oil gathers, there are 14 cm in length, 20 cm in width, and 6 cm in depth.
The narrow part that catches the Oil of the tip part is the widest part on the outside is 17 cm and the narrow part is 15 cm.
Besides that, in the inside of a place with grooves vertically, it has a slope of 16 cm in length, 20 cm in width and 13 cm in width..
The feeling put on the floor has a sense of stability and it is very reliable!
Well, it is said that Large doubles as Small, but again "Appropriate material right place, proper use" It is necessary.
Since this time PROTOOLS Compact Oil Drain Pan is newly added, it seems to be able to enjoy Oil replacement work efficiently.
In the photograph, the PROTOOLS Sticker is stuck, but I tried to peel off what was attached to the packed bag.
View detail
I am graduating from a tooth Brush
I bought it for trial because I heard that it is soft eyes Brush. I certainly think it's soft. However, rubbing the O-ring part of the Seal chain with a hard brush is not good for mental health, so I think whether this hardness is good. Too too stubborn dirt is only to use the tooth Brush together, and dirt will not get bad if it keeps on a regular basis.
I think Brush attached to the bottom of the handle is unnecessary?. It's soft and Brush is long, so I can not find how to use it (Lol)
View detail
I used it for the first time!
I tried to decompose the Head of APE.
Valve spring compressor was used for the first time, so we can not compare with other products, but Valve could easily Rose.
Since Attachment comes with 3 types, I think whether it can correspond to various heads.
First of all, the price is cheap for beginners became the deciding factor of purchase. It will be used for assembly this time.
View detail
Satisfied with COSPA! Firm making.
Purchased as a disassembling tool of Clutch such as APE, CUB.
It was my first time, but I could use it without particular problems.
It is the deciding factor of purchase that the price was cheap regardless of what.
The frequency of use is also low.
I think that it is good though it appears variously.
View detail
Whether it is problematic to handle indoor use
I bought without confirming it is White. It is for so-called indoor use.
Products dealing with Motorcycle supplies, which are not supposed to be used outdoors ... It is Lineup that doubts the product policy of WEBIKE itself.
View detail
Quite
It is quite solid making.
Previously I used a board, but there is a fear of breaking,
I bought this product.
The back is uneven and it is a slip prevention.
Hold STAND firmly.
Since the color is noticeable with red, it seems to be a prevention of forgetting after use.
View detail
To remove the Exhaust retaining Ring Clip
I bought it to remove the XL 1200 C SPORTSTER 1200 Exhaust Retaining Ring Clip. I also thought about purchasing a special tool, but since it is a waste that I can only use it to remove the retaining Ring Clip, I made this product that can be used with Universal. Therefore, although it took a bit of effort to work, I could remove it.
Attachment also comes with 4, I think that it is a bargain. I will also use it for other work.
View detail
Easy to use
Until now I have used tooth brush for cleaning of Chain, but buy this reputable goods that I care. Cleaning is easy. Because you can clean three sides at a time. Just a little more Brush may be hard - -. View detail
Please do not miss the old model Tank!
There is difference in serviceability between the presence of this item and the absence of this item.
When doing various kinds of maintenance, maintenance is possible mostly by removing Seat and Tank mostly.
There is one Hose in Tank's way, connecting Right and Left Side. It is troublesome to clamp this out for maintenance.
If you install this product you can finish with One-touch, so if you are going to maintenance well the old car ride will recommend the purchase.
View detail
I know madness of Alignment
I used it with KLX 125
This car looses Chain frequently so purchase for adjustment
The work we were doing in appearance became a bit more accurate
I can confirm the Well if the confirmation round bar is a little longer, but it is a needle for the vertical level but the movement is confusing and it can not be reliable. It's Minus ★ because it's together even if it's not there
Screw part is Plastic, but because it is the king who wants to tighten hands, strength etc etc. Is there no problem?.
View detail