Reviews
Just right for disposable
[How is it used?
Used to clean parts during Restore of TZr50R.
I bought it because the price was low and the tips of the hairs I had before were becoming stiff.
How was your experience with it?
It was easy to hold and use.
The small size also makes it easy to clean the smallest of areas.
However, it may not be suitable for cleaning Large objects.
How did it compare to other products?
Although the quality is much lower than the slightly more expensive Brush, it was great for a simple cleaning of the Sunday mechanic. Especially when it comes to Restore, these supplies are cheaper and larger in quantity than in quality.
[Points to note]
There are three types of bristle tips, but use them with caution, as they may damage parts if used incorrectly.
View detail
Connection
It is used for redoing Wiring.
Just Right Quantity:It was just the right number of pieces to reASSY in a set.
View detail
Convenient
Usable as normal. I bought it for measuring Fork oil. I think it is good to have several of them. View detail
For cleaning.
I bought it because it seems useful for cleaning carburetor and for cleaning tight places.
Quantity:1 Set of 5pcs. so it can be used in different places, which seems convenient.
View detail
Exchange, Spare
I bought this for replacement installation and spare.:1 Set of 3pcs., affordable and helpful.
How about the quality? I don't know, but I thought it was good since it is Fuse.
View detail
As you tighten it in.
I use it for Caliper's rubout etc. When I tighten the Screw and open the Plate with 4POTCaliper like NC30, the Plate is not parallel and I can't get the 4 Pistons to be even etc.
The fact that it cannot be pushed in makes it difficult to use. The texture is good, so I would like to have the Guide of Plate as Quantity instead of 1 pc.:I am wondering if I should have purchased the 2pc one.
View detail
Spare
I seem to have shorted it when replacing Blinker's Relay, so I bought this for a spare.
Quantity:1 Set of 3pcs., The selling price was very reasonable.
View detail
I can use it
I recommend it because it is easy to use. View detail
If it were a little cheaper, there would be a reason to choose it.
[How is it used?
Purchased for storage and maintenance of Dual PurPass vehicles.
I already have a Lift Stand made by DRC, but I bought an additional one because I use it for storage of another vehicle in my garage. I'd like to compare it with the DRC one.
Was the one you received as per Image?
I don't know which Manufacturer was the first to market this type of product, but I think DRC is the MAJOR MANUFACTURER in the STAND of LiftType with Damper? I think so.
PROTOOLS' Lift Stand is a "DRC+AstroPRO Ducts÷2" The product is functional and just like the Image, although there are some parts where the system is a bit....
Was the installation difficult?
The body and lever part, which is lifted by the principle of leverage, arrive in the box in a pre-installed state, so after opening the box, the body is assembled with two Bolts & Nuts.:Pair (for Left and Right) Bolt did not go into Smooth due to a subtle Gap in the
I used a round bar File to slightly enlarge the hole, but I think this is an individual difference, so I don't think all products have gapped holes.
How was your experience with it?
The vehicle is almost vertical and stable after lift up with less rattling at the props than with DRC products.
Since it has only been a short time since we purchased it, we have not experienced any Damper gas loss, and there is no functional inferiority compared to DRC products, and we hope that the performance will be maintained for as long as possible.
The rubber mats on the ceiling, which are grounded to the vehicle, are fixed to the top panel with thicker Rivet, but in terms of visual quality, they are inferior to those made by DRC.
[Was there anything that disappointed you?
I don't think it is a disappointment, but the paint on the lever part of the leverage is easily peeled off, so it might be better to handle it carefully, apply protective tape, or repaint it, as the base is exposed when it is raised and lowered roughly.
Other items that would be helpful
Point and hang of installation
If each moving part is thoroughly greased up before use, wear and force on moving parts can be reduced, so it is a good practice.
Quantities like the one I purchased:Pair (for Left and Right) Even if there is a gap in the screw hole of a screw, it is easy to rework it, so do not panic and check each part after temporary assembly.
[Availability and clarity of the Instruction Manual
It contains only a very simple installation instruction manual like a memo, but I think it is an easy-to-understand product for its intended use.
[Notes]
When lifting up, use the carBoth Sides of the car where the ground surface is as flat as possible.
Lifting up on an uneven surface can cause the vehicle to become unstable and fall over, damaging or injuring the motorcycle.
Also, be sure to lock the lock lever after lifting up.
Please make sure to check the lock to avoid the risk of accidentally touching the lever of the leverage part and causing the motorcycle to come down.
[ITEMS TO BUY TOGETHER
If you do not have Grease as a maintenance tool, purchase cheap Grease and apply it to the moving parts during assembly.
[Opinions and requests to Manufacturer
To be honest, there is not much price difference between this product and the one made by DRC. "Sell" If you pay a little more Gold, a real (?) DRC will replace it. If you pay a little more Gold, you can replace your DRC with a real (?) DRC.
I would not say half the price, but a price about 4,000 yen lower than that of the DRC product would be attractive enough.
View detail
I think it's cheap
Personally, I thought it was inexpensive.
It feels good to use, polishes properly, and is convenient to have.
I would buy it again.
View detail
For cleaning
Quantity:1 Set of 3pcs. and the price is low, so you can use it without worrying.
The Plastic section is also easy to hold and has a nice elasticity.
It is cosmetically good, so it is enough if you can hold it at some level.
View detail
Lidded to prevent Garbage from getting in.
[How is it used?
Used to refuel a fuel tank from a carry can at Circuit.
Was the one you received as per Image?
Yes.
How was your experience with it?
The lid prevents Garbage from entering the container even if it is left outdoors.
The lid is important to keep Garbage out of the Fuel Line.
[Points to note]
None
How did it compare to other products?
I bought it because of its 5L capacity and large size, and because it is a reliable brand.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Convenient for both ChainMaintenance and Wheel cleaning
These are the useful items that impressed us the most after we started to ride motorcycles. Especially for those of us who started our motorcycle life with Belt-driven motorcycles such as Buell and Harley, Chain maintenance has been a great hassle since we started to ride Chain-driven motorcycles.
I was very impressed when I found this maintenance stand, and it made it very easy to clean the wheels and check for nails and other foreign objects after driving. Moreover, even with a Harley Ultra weighing nearly 400 kg, it was not particularly difficult to put it on the stand, and it is a supreme product that is very easy to put on and take off.
View detail
Easy to dispose of Oil.
[How is it used?
To dispose of Oil after replacement in a waste oil can.
Was the one you received as per Image?
Yes.
How was your experience with it?
I haven't used it yet, but unlike the cheap oil pans I've been using from Asphalt Products, I've been able to use the same oil pan.
I like that the spout is attached around the middle.
This will allow pouring without spilling even if it is filled to the brim.
[Points to note]
None
How did it compare to other products?
It has a handle and I thought it was well thought out for the situation in which it would be used.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I wanted something like this!
[How is it used?
I was looking for something like Towel with high water absorbency. This was the perfect product to wipe off water immediately after washing the car.
Was the one you received as per Image?
Just like the Image! It has the texture of a Towel that you soak in water and wrap around your neck in the summer. It absorbs water as soon as you wipe it up and dries quickly. It is very good because it becomes a little heavier after blowing water and can be used again as soon as it is wrung out.
How was your experience with it?
I am glad I tried it. I feel it is essential for car washes because you can squeeze it out and use it over and over again.
[Points to note]
The moment I bought it and opened the package, it had a distinctive smell.
How did it compare to other products?
I don't know because I have not purchased any other products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Common Chain brush
The three-sided type from various manufacturers.
Brush. I used to use it before.
If the Cleaner bounces on the Wheel or
You have to do it twice or you have to worry about the order.
I can't wash my car and now I don't have enough Space for washing my car.
I use Tooth Brush because I can't do it.
I wash the whole car body at once and hose water.
I can use it! I think it would be very useful in situations where
The opposite is Straight's Brush, which I don't know how to use.
I didn't know what to do, so I stabbed it from under the Chain, and the gap hardened.
I used to use it to get dirt off of them, but as a result...
Seal was also hurt to shreds, so that's how I used it.
No recommendation…w
View detail
PRO TOOLS D-type carburetorTool
I purchased a similar product from CHINA, but it was not only inaccurate but unusable, so I purchased this one.
It is a little expensive compared to similar products at 770 yen, but I wish I had purchased this one from the beginning because it would have been useless if I couldn't use it.
I had the impression that it was not in the category of high-end tools Brand, but I was satisfied because it had a good texture, was comfortable in my hand, and above all, the precision was neat.
View detail
Is it worth the price?
It is firm and stable, so I can use it with confidence. View detail
Front Wheel Stand
Until now, I have been doing maintenance in the garage using only the jTrip Rear Stand, but now I can easily raise the Rear Stand with one hand after fixing it with the Front Wheel Stand.
It is very convenient and quite stable in the upright position.
Someday in Transporter …
I have all kinds of fantasies, such as.
It takes some force to push and pull, but once you get used to it, I don't see what the problem is.
I should have bought it from the beginning.
View detail
Type, with its neck bent in a squishy way.
Snap and Type, which breaks the neck without a sound.
The Grip is thick and the Red colored Lock button is quite stiff.
View detail