Reviews
Convenient to have. Used during car wash
[Usage]
I use it when I wash my Motorcycle to prevent water from getting in through the Exhaust System. I used to use Dustcloth as a substitute, but this product is easier to use. Conversely, it is a product that can be used as a substitute, so I feel the price is a little high.
[Feeling of use]
Just plug it into the Exhaust System outlet before washing the car.
Since the part to be inserted is rubber, there is no risk of scratching the exhaust system when it is inserted.
(Points to note)
The Rubber on the insert is hard, so you need to push a little harder when inserting it.
Sealability seems to be there. It is not a product that is completely waterproofSeal.
View detail
If used gently, it will last somewhat longer.
[How is it used?
It is used during Tire replacement &Puncture repair work on Dual Par Pass cars.
Many Dual PurPass vehicles that enjoy mountain play and forest roads use a Tube in the Tire, so these Items are very useful for getting the Valve of the Tube out of the Valve hole in the Rim.
Wire is thin, so be careful when working with it, as the handle clasp can easily come off or the wire can easily break if pulled with force.
Did you receive the item as per the Image?
I used to use a similar product from another manufacturer, but it was used roughly and broke, so I bought this product, which was a little cheaper at Webike at the time.
The product was as per the Image.
How did you like it?
Once you get the hang of it, you can easily pull out the Air Valve in no time at all.
Especially in winter, when tires become hard, I can't do without this product.
[Points to note]
As I wrote above and others have written. "Forced to pull by brute force." The product is fragile when you try to pull it out.
Although Manufacturer is different, if you search for DRCAir Valve Puller in the product introduction section of Webike, you will find a video at the bottom left of the introduction section that explains it in an easy-to-understand manner. If you are not sure how to use it, please refer to the video on YouTube.
How did it compare to other products?
I used to use DRC's Air Valve Puller before this product, and my personal impression is that it was easier to use DRC's Air Valve Puller because the Wire tends to rotate when Screw-tightening the Valve. (Possible individual differences) 。
Other items that would be helpful
Point and hang of installation
With your free hand, press lightly on the backside of the valve of the tube toward the rim while guiding the tube.
The rest, as I mentioned above, you can watch the video.
Basics We're not in a hurry. We're going to do our job well and reliably." is the best shortcut.
[ITEMS TO BUY TOGETHER
Prepare Lever, BEETWax, Inflatoretc. for Tire removal and attachment separately from the things to be replaced.
[Opinions and requests to Manufacturer
It would be nice if you could use a stronger wire to ensure durability, but we would be grateful if you could just keep this product in the lineup.
View detail
Just right for disposable
[How is it used?
Used to clean parts during Restore of TZr50R.
I bought it because the price was low and the tips of the hairs I had before were becoming stiff.
How was your experience with it?
It was easy to hold and use.
The small size also makes it easy to clean the smallest of areas.
However, it may not be suitable for cleaning Large objects.
How did it compare to other products?
Although the quality is much lower than the slightly more expensive Brush, it was great for a simple cleaning of the Sunday mechanic. Especially when it comes to Restore, these supplies are cheaper and larger in quantity than in quality.
[Points to note]
There are three types of bristle tips, but use them with caution, as they may damage parts if used incorrectly.
View detail
For cleaning
Quantity:1 Set of 3pcs. and the price is low, so you can use it without worrying.
The Plastic section is also easy to hold and has a nice elasticity.
It is cosmetically good, so it is enough if you can hold it at some level.
View detail
PRO TOOLS D-type carburetorTool
I purchased a similar product from CHINA, but it was not only inaccurate but unusable, so I purchased this one.
It is a little expensive compared to similar products at 770 yen, but I wish I had purchased this one from the beginning because it would have been useless if I couldn't use it.
I had the impression that it was not in the category of high-end tools Brand, but I was satisfied because it had a good texture, was comfortable in my hand, and above all, the precision was neat.
View detail
Is it worth the price?
It is firm and stable, so I can use it with confidence. View detail
Great value - Must have for blind bearings
A must-have for double-blind bearings that you need to remove for engine overhaul.It worked great in the blind transmission bearing. It didn't work for some jammed swing bearings, but the collet kept its grip until the bearing seat began to twist. It's not the fault of the tool, it's a testament to how tight these races are.When your bearings need replacing, this bearing remover hits the bearing so evenly that it takes very little effort to use. I would use brass rods and hammer around the bed to get it out and sometimes that just wouldn't work. But that means you slide, compress, and quickly shift the weight up to push the mattress out. This is one of my most appreciated tools. And the protools price surpasses other competing products that appear to be of similar quality. I had no issues with this tool. It probably even works on my bike beds. View detail
Quantity:Set items are a bargain!
Quantity:It is a Set item, so it is a good value.
The nails can be replaced, so they can be used in a variety of ways.
I will end up buying a dedicated product, but for now, this is what I use for Rose.
View detail
Easy to use
Brush is shaped for easy gripping and holding.
The handle is not Gold, so it is not cold and comfortable to the touch, so it is not a burden to work with.
Brush is a little hard, so it rubs well and is effective in removing stubborn stains.
View detail
Good brush
Nice and simple brush View detail
Oil change
It is convenient if you have a fixed amount to fill, such as three 1L cans, etc. Oil Jugs are a pain to wash every time, but this one is easy to wash. View detail
rust removal
I bought this to remove rust from screws and other parts.
The price is reasonable, and the brush part seems to be sturdy and can be used to some extent.
View detail
To relieve frustration
[How is it used?
I'm sure we've all had the experience of dropping a bolt or nut into a gap in the frame while servicing a motorcycle, only to have it end up further back when you try to remove it.
I dropped my Battery Bolt during maintenance the other day and it took me 5 minutes to find it. I bought this to save myself the frustration.
Was the one you received as per Image?
I couldn't really tell from the product photo, but the product I received had a place to hang it.
How was your experience with it?
I lifted a 27mm Socket that I had on hand, and it lifted beautifully.
27mm is surprisingly heavy, and Magnet's power is quite powerful.
The only problem is that the stretching part is weak, so if you try to lift something heavy, it will automatically stretch under the weight. (Lol)
[Points to note]
The Magnet is rather powerful, so I think it's safe to avoid using it near a smartphone or PC.
How did it compare to other products?
I think there are similar pickup tools in the 100 yen shops, but I chose this product because I felt the magnet was not strong enough.
I haven't compared them directly, but...
【Review】
The power to pick up is perfect.
The only thing I would like to see more of is the strength of the elastic part.
View detail
The handle is short!
[How is it used?
Maintenance of SEROW250fi
Was the one you received as per Image?
Yes
How was your experience with it?
Subject of comparison = Fujiwara Sangyo (EValue?) 3/8, Pre-set type, 20 to 110Nm
?The number of GEAR is 45T, so it is very good to be able to cachica fine!
?The pattern is short and Lever's principle is weak and Large strange.SEROW Tire on and off (85Nm) I did it by standing up and putting my weight on it. The Fujiwara Sangyo was able to do it by squatting and using only the strength of my arms???. I think it needs to be 5 cm longer than the Fujiwara Sangyo's so that the workability can keep up with the measuring ability.
? If you have a small torque of about 50Nm or less, coupled with the GEAR number, it's easy to use.
This is just an impression in my case, because there are individual differences in arm strength etc.
[Points to note]
? Above, where the handle is short. If you have a strong arm, it may be Large strong.
Memory is not in increments of 10, but in increments of 14. You'll get used to it.
How did it compare to other products?
As mentioned above, the number of GEARs is good, but the disadvantage is that the handle is short and difficult to apply force.
I've only used this and Fujiwara Sangyo, so I can't compare it to others.
View detail
Ideal for ChainMaintenance
This is a very efficient cleaning brush for the maintenance of the drive chain, it can clean the back side of the link plate and the three sides of the roller at once, which is very efficient and saves time for chain maintenance. The hardness of the brush is optimal and can be used safely on the chain. View detail
It can be used for any Spring.
Convenient installation and removal of the spring, and easy handling of hard and strong spring, easy to hold and safe to use for both exhaust spring and side stand spring. View detail
Once you use it, you can't stop.
I use it with Degreaser.
It's nice to be able to clean in three directions at the same time.
The brush is not too hard and not too soft, just right.
However, the details may be more beautiful with Tooth Brush!
View detail
My hands don't get tired easily.
The brush is easy to grip and hold, so your hands will not get tired while working. The brush is a little hard, so it is effective for removing stubborn stains in areas that cannot be scrubbed too hard. View detail
Easy to remove dirt.
Cleaning the drive chain is quite a large amount of work, but you can polish 3 sides at once. The brush is not too hard and not too soft, so it is effective for chain cleaning. View detail
It's still convenient
It is an essential part of the electrical installation process. The price of this product is unbelievably cheap. Because there is no trouble of bad contact, I can use it at ease. View detail