Reviews
Can be used without problems
This is the first Chain Tool I bought, so I can't compare it with others, but I had no problem using it.
Since the cast surface of the Gold genus is intact, it is likely to rust the next time it is used unless it is treated against rust after use.
View detail
Spring hook
It is used for spring removal and attachment of the Exhaust System.
The Type is a little long, so it seems to be easy to apply force when pulling, but in some places the long length gets in the way and makes it hard to work with.
It is good that it can be split into two parts, can be removed, and can be pulled by swinging it at an angle, but it turns too much and cannot be pulled properly, making it difficult to install the spring hook.
View detail
Oil change
Used when injecting gear oil.
The Bellows one that comes with the Oil is fine, but this one seems better for Oil injection because it can be shrunk with Silicon and the angle is easier to work with.
It is not used that often, but it is an expensive product, so if you have 1 pc. you can use it for various purposes.
View detail
Convenient
Usable as normal. I bought it for measuring Fork oil. I think it is good to have several of them. View detail
For cleaning.
I bought it because it seems useful for cleaning carburetor and for cleaning tight places.
Quantity:1 Set of 5pcs. so it can be used in different places, which seems convenient.
View detail
Common Chain brush
The three-sided type from various manufacturers.
Brush. I used to use it before.
If the Cleaner bounces on the Wheel or
You have to do it twice or you have to worry about the order.
I can't wash my car and now I don't have enough Space for washing my car.
I use Tooth Brush because I can't do it.
I wash the whole car body at once and hose water.
I can use it! I think it would be very useful in situations where
The opposite is Straight's Brush, which I don't know how to use.
I didn't know what to do, so I stabbed it from under the Chain, and the gap hardened.
I used to use it to get dirt off of them, but as a result...
Seal was also hurt to shreds, so that's how I used it.
No recommendation…w
View detail
Type, with its neck bent in a squishy way.
Snap and Type, which breaks the neck without a sound.
The Grip is thick and the Red colored Lock button is quite stiff.
View detail
Common Chain brush
[How is it used?
I use it to clean the Chain on my road motorcycle.
Was the one you received as per Image?
It is a common Chain brush as shown in the Image.
How was your experience with it?
I was a little worried about damaging the Seal.
For the 3-sided Brush portion, one side floated on 530Chain.
Brush width can be adjusted to match Chain size! so I will try to adjust it next time.
But not at the height of Brush. "width" So I wonder if it doesn't make much sense or not.
I haven't found much use for the long Brush at the end of the handle (laughs).
How did it compare to other products?
I used to use a 3-sided Chain brush from another Manufacturer, but there is no difference.
The only difference is the color.
View detail
It can be used normally
It is easier to be an Overhaul of Fork.
It is not expensive and you should have it.
The quality is pricey, but it's good enough to do what I want to do.
I have no problem at all with this product.
View detail
Can't clean even the smallest part. The bristles are hard and may damage the seal.
[How is it used?
For cleaning the chain of Ninja 400.
How was your experience with it?
The bristles are harder than I imagined, and if you scrub with too much force, you might hurt the seal. I can't go into the detail like the tooth brush, so I can only clean roughly.
After using it a few times, I came to the conclusion that it was the strongest tooth brush after all, and I had it sleep in the warehouse.
Chain is just a rough cleaning! I don't use it anymore. I don't use it anymore because I want to keep it as clean as possible.
[Points to note]
As mentioned above, the hair is hard, so it's best not to scrub too much.
How did it compare to other products?
The bristles are a lot harder than the typical shoe brush-like ones that come with Chain cleaner.
[Opinions and requests to Manufacturer
It might be nice if they made the bristles a little softer.
View detail
Cheap is justice
Basically, this is what I wrote in PROTOOLS Professional tools Bullet Terminal Male.
Are there people who have different Impressions in Male and Female?
If I had to say, I'd say that Female is the larger of the two, so it's easier to pick up.
Please add a section for pinchability to the detailed evaluation and such.
[How is it used?
I need it for Wiring teasing, so I decided to stock a lot of it anyway and came across this product.
Was the one you received as per Image?
It was as shown in the Image. Conversely, is there a Pattern that is not as Image?
I didn't count it, but it seemed to have a volume of 100 units.
How was your experience with it?
If there is an impossibility, it is Large strange, but there is also no impossibility.
How did it compare to other products?
Bullet TerminalQuantity, which used to be included when you bought Electric Works Pliers made by Emon.:I was using Set.
I'm not sure if this is a good thing or not, but I think it's a good thing.
Still, I appreciate the price for 100 pieces.
I will buy the next one.
[Points to note]
Even if it is the same 4mm size, it may be a little loose when you try to connect with other company's Bullet Terminal.
If you can afford LEAD lines, you might want to unify them with those made by Professional tools.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Items to buy together
Electric Works Pliers. On the contrary, why did I buy it without this?
View detail
I was attracted by the price.
[How is it used?
I need it for Wiring teasing, so I decided to stock a lot of it anyway and came across this product.
Was the one you received as per Image?
It was as shown in the Image. Conversely, is there a Pattern that is not as Image?
I didn't count it, but it seemed to have a volume of 100 units.
How was your experience with it?
If there is an impossibility, it is Large strange, but there is also no impossibility.
How did it compare to other products?
Bullet TerminalQuantity, which used to be included when you bought Electric Works Pliers made by Emon.:I was using Set.
I'm not sure if this is a good thing or not, but I think it's a good thing.
Still, I appreciate the price for 100 pieces.
I will buy the next one.
[Points to note]
Even if it is the same 4mm size, it may be a little loose when you try to connect with other company's Bullet Terminal.
If you can afford LEAD lines, you might want to unify them with those made by Professional tools.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Items to buy together
Electric Works Pliers. On the contrary, why did I buy it without this?
View detail
Parts cleaner and still looks large and durable
It seemed to be Large sturdy even after washing it with Gasoline and Parts cleaner.
Because it is semi-transparent, it is hard to see the Memory, but I think it is inevitable on the Material because the transparent one is Large and a half, which becomes cloudy when washed with Parts cleaner.
When I used it to mix 2-stroke Oils, after measuring it, it was Large sturdy enough to dobble and wash on the Gasoline side.
View detail
Wiring of the Handlebar Grip
I opted for the Manufacturer's Professional tools, which I have always bought, because all Manufacturers look the same in terms of shape despite the price difference. Made in Taiwan
It's made in Taiwan, so I was relieved to see that it was made in Taiwan.
Since the Wiring location was mainly just the Handlebar Grip, I was still turning round and round with the Pliers. When I actually used the Wire twister pliers, the work was fast and the finish was beautiful because it was a special tool.
If you don't know how to use it, it's easier to search for the video if you don't know how to use it, because it doesn't come with an instruction manual, although the working procedure is simple.
View detail
no problem
I bought this because I lost the chain brush I was using before.
Last time I bought one from We-BigGarage, but they didn't have the same one, so I went with this one.
I have no problems with the feel, etc.
View detail
Hard to grip
The price is low and the Wire is hard, so it's good for Rust drop
However, the grip part is simple, just a steel plate pressed into a U shape, so you need to put some force into it It hurts when I'm dropping Rust and it digs into my hand
Wearing work gloves or wrapping an extra piece of cloth around the grip will not do much good
Other than that, there are no other problems
View detail
I don't know
it takes a lot of time to prepare various parts and tools for the first time to adjust the carburetor I bought it I've been looking at the ratings, and I think it's fine for me as long as I get the benefits of the price View detail
It might be better than nothing ...
Originally intended purpose was to buy Clutch Spring of CYGNUS for replacement, but it was too hard for power to enter and eventually could not be used. However, it was enough for attaching and detaching Spring such as Exhaust System, so it was easy to work depending on the place to use. View detail
I used it for the first time!
I tried to decompose the Head of APE.
Valve spring compressor was used for the first time, so we can not compare with other products, but Valve could easily Rose.
Since Attachment comes with 3 types, I think whether it can correspond to various heads.
First of all, the price is cheap for beginners became the deciding factor of purchase. It will be used for assembly this time.
View detail
Four kinds are attached, the Attachment for exchange can work, changing many things, and they are good goods.It has worked, although are used for exchange of the MASTER Assembly, and it was last-minute.
Four kinds are attached, the Attachment for exchange can work, changing many things, and they are good goods.It has worked, although are used for exchange of the MASTER Assembly, and it was last-minute. View detail