Reviews
Recommendation for those who are anxious to draw a Maintenance Stand alone!
Although an instruction manual is included, it does not explain the details of how to assemble the unit, which was confusing at first. I would have liked to have a guide to the screw holes to be used for the approximate number of inch tiers.
There was a product video on how to use and assemble the product, so I checked it out and assembled it. The video was very helpful.
The NINJA1000's front tire (120/70Zr17) was firmly secured and stood on its own. It also felt stable when lowering the bike.
I used to do maintenance only with the Rear STAND, but when I lifted up the bike by myself, I didn't hang it properly and it fell over. I wish I had bought it before I stumbled...I would like to recommend this product especially to those who work alone to avoid damaging a large motorcycle.
View detail
Convenient to have. Used during car wash
[Usage]
I use it when I wash my Motorcycle to prevent water from getting in through the Exhaust System. I used to use Dustcloth as a substitute, but this product is easier to use. Conversely, it is a product that can be used as a substitute, so I feel the price is a little high.
[Feeling of use]
Just plug it into the Exhaust System outlet before washing the car.
Since the part to be inserted is rubber, there is no risk of scratching the exhaust system when it is inserted.
(Points to note)
The Rubber on the insert is hard, so you need to push a little harder when inserting it.
Sealability seems to be there. It is not a product that is completely waterproofSeal.
View detail
Rear stand hanging is easy
I found the product by chance, searched for it on Webic and bought it. It is super easy to hang Rear stand especially in Garage. I wish I had bought it from the beginning. I highly recommend it. View detail
Just right for disposable
[How is it used?
Used to clean parts during Restore of TZr50R.
I bought it because the price was low and the tips of the hairs I had before were becoming stiff.
How was your experience with it?
It was easy to hold and use.
The small size also makes it easy to clean the smallest of areas.
However, it may not be suitable for cleaning Large objects.
How did it compare to other products?
Although the quality is much lower than the slightly more expensive Brush, it was great for a simple cleaning of the Sunday mechanic. Especially when it comes to Restore, these supplies are cheaper and larger in quantity than in quality.
[Points to note]
There are three types of bristle tips, but use them with caution, as they may damage parts if used incorrectly.
View detail
For cleaning
Quantity:1 Set of 3pcs. and the price is low, so you can use it without worrying.
The Plastic section is also easy to hold and has a nice elasticity.
It is cosmetically good, so it is enough if you can hold it at some level.
View detail
useful
I have purchased it several times and it is very useful to have it on hand for use in small places.
No durability issues.
View detail
Convenient
Convenient for cleaning the rear wheel and maintenance of the drive chain.
Chain can be cleaned very easily without Center Stand.
View detail
Oil change
It is convenient if you have a fixed amount to fill, such as three 1L cans, etc. Oil Jugs are a pain to wash every time, but this one is easy to wash. View detail
For motorcycles that don't have a center stand.
Useful for cleaning the rear wheel and Drive chain, reducing chain cleaning and grease up maintenance time, and is a must-have item for any motorcycle without a center stand. View detail
It's easy to position yourself.
Motorcycle maintenance is quite useful for me as I do a lot of work in a low position. Just the right height and a few tools are also available on the Quantity:It is easy to move around in a seated position without straining. View detail
I've been using it for a while, but...
It is good for ChainMaintenance and so on, but the drawback is that it is heavy, and the adjustment is necessary because the Gap comes gradually as the tire is turned, and it is troublesome to put the tire on every single time.
Also, it takes a bit of effort to rotate the Tire.
It's not bad, though.
Right now I'm using a lightweight Compact and easy Unit.
View detail
Active in a variety of situations
It is very useful for a wide range of applications, mostly for bundling wiring, but it can also be used to lock the front tire on a motorcycle during maintenance. It's a good cosmetic product, and there is enough to go around. View detail
Thin but strong
Is it thinner and larger than I expected? But when I used it, it was surprisingly solid and never broke or tore off Mm
Often a poorly made Band will get hit by UV rays and become bruised and torn off I've been using it in a hot spot right next to the Engine for a year in the wild and have had no problems
Necessary and sufficient
View detail
Good stuff
I bought this to maintain my motorcycle's front and rear wheels It should be lifted up with front and rear STAND, but I did not have to remove the Tire It is inexpensive and effective enough for cleaning purposes
However, if you don't let the Roller have Tire orthogonal to the Rollers, the Gap is gradually reduced as you rotate it You need to be careful when you put the Tire on it
View detail
Cospar good
This is Large sturdy, though it was thinner than I expected
The strength is fine and I will use it more and more
I would like to buy something a little thicker
View detail
I think that it is very good..
Large is about a child's chair,
It is exactly good Large Kimono for maintenance of Motorcycle.
It is completely different if there is this or not.
Work has become quite easy.
I think that it is not a product to be damaged by purchase.
View detail
It looks nice
As a performance I think that it is a Graduated cylinder, but it looks good, so it will be a picture just by putting it in Garage. It is safe because it can be lightly dressed exactly when changing Oil. View detail
Surprisingly convenient
Until now I was lucky enough to lubricate Wire, but if there was this I could lubricate properly.
After waiting for a while after lubricating it, you can see that dirty oil comes out from the other side and you can see that lubrication is successfully done.
Wire is also cleaned, it is well understood that new lubricant is injected well.
Because it is cheap, it is convenient if there is one.
View detail
It might be unexpected
I purchased it for trial shipping adjustment.
I betrayed expectations in a good way.
It can be used quite well.. The sense that we did not expect increased the sense of profit. Even if I do not last long, it can not be helped at this price.
View detail
I know madness of Alignment
I used it with KLX 125
This car looses Chain frequently so purchase for adjustment
The work we were doing in appearance became a bit more accurate
I can confirm the Well if the confirmation round bar is a little longer, but it is a needle for the vertical level but the movement is confusing and it can not be reliable. It's Minus ★ because it's together even if it's not there
Screw part is Plastic, but because it is the king who wants to tighten hands, strength etc etc. Is there no problem?.
View detail