Reviews
Oil change
Used when injecting gear oil.
The Bellows one that comes with the Oil is fine, but this one seems better for Oil injection because it can be shrunk with Silicon and the angle is easier to work with.
It is not used that often, but it is an expensive product, so if you have 1 pc. you can use it for various purposes.
View detail
Connection
It is used for redoing Wiring.
Just Right Quantity:It was just the right number of pieces to reASSY in a set.
View detail
Convenient
Usable as normal. I bought it for measuring Fork oil. I think it is good to have several of them. View detail
For cleaning.
I bought it because it seems useful for cleaning carburetor and for cleaning tight places.
Quantity:1 Set of 5pcs. so it can be used in different places, which seems convenient.
View detail
If it were a little cheaper, there would be a reason to choose it.
[How is it used?
Purchased for storage and maintenance of Dual PurPass vehicles.
I already have a Lift Stand made by DRC, but I bought an additional one because I use it for storage of another vehicle in my garage. I'd like to compare it with the DRC one.
Was the one you received as per Image?
I don't know which Manufacturer was the first to market this type of product, but I think DRC is the MAJOR MANUFACTURER in the STAND of LiftType with Damper? I think so.
PROTOOLS' Lift Stand is a "DRC+AstroPRO Ducts÷2" The product is functional and just like the Image, although there are some parts where the system is a bit....
Was the installation difficult?
The body and lever part, which is lifted by the principle of leverage, arrive in the box in a pre-installed state, so after opening the box, the body is assembled with two Bolts & Nuts.:Pair (for Left and Right) Bolt did not go into Smooth due to a subtle Gap in the
I used a round bar File to slightly enlarge the hole, but I think this is an individual difference, so I don't think all products have gapped holes.
How was your experience with it?
The vehicle is almost vertical and stable after lift up with less rattling at the props than with DRC products.
Since it has only been a short time since we purchased it, we have not experienced any Damper gas loss, and there is no functional inferiority compared to DRC products, and we hope that the performance will be maintained for as long as possible.
The rubber mats on the ceiling, which are grounded to the vehicle, are fixed to the top panel with thicker Rivet, but in terms of visual quality, they are inferior to those made by DRC.
[Was there anything that disappointed you?
I don't think it is a disappointment, but the paint on the lever part of the leverage is easily peeled off, so it might be better to handle it carefully, apply protective tape, or repaint it, as the base is exposed when it is raised and lowered roughly.
Other items that would be helpful
Point and hang of installation
If each moving part is thoroughly greased up before use, wear and force on moving parts can be reduced, so it is a good practice.
Quantities like the one I purchased:Pair (for Left and Right) Even if there is a gap in the screw hole of a screw, it is easy to rework it, so do not panic and check each part after temporary assembly.
[Availability and clarity of the Instruction Manual
It contains only a very simple installation instruction manual like a memo, but I think it is an easy-to-understand product for its intended use.
[Notes]
When lifting up, use the carBoth Sides of the car where the ground surface is as flat as possible.
Lifting up on an uneven surface can cause the vehicle to become unstable and fall over, damaging or injuring the motorcycle.
Also, be sure to lock the lock lever after lifting up.
Please make sure to check the lock to avoid the risk of accidentally touching the lever of the leverage part and causing the motorcycle to come down.
[ITEMS TO BUY TOGETHER
If you do not have Grease as a maintenance tool, purchase cheap Grease and apply it to the moving parts during assembly.
[Opinions and requests to Manufacturer
To be honest, there is not much price difference between this product and the one made by DRC. "Sell" If you pay a little more Gold, a real (?) DRC will replace it. If you pay a little more Gold, you can replace your DRC with a real (?) DRC.
I would not say half the price, but a price about 4,000 yen lower than that of the DRC product would be attractive enough.
View detail
If you use the Rear stand alone, it's a must!
I use several of the same STAND, but Large is convenient.
Can also be used for 21-inch Wheels if forced.
The slender Tire falls over, so a rearward Jack-up or Lift-up is immediately necessary, but if you understand the precautions, it is a Large-change convenient Clamp.
The CHINA packaging arrived with the STAND exposed upon delivery.
Points will be deducted for numerous scratches and color peeling.
View detail
It can be used, but only in Large size.
Cost performance is sufficient. However, care should be taken when using it on heavy motorcycles. The clearance of the support part is large, so it will be slightly slanted. We own an NSR250R and an NSR50, and it can be used for both. Both vehicles are lightweight, so even if it is skewed by hand, it can be corrected. View detail
Parts cleaner and still looks large and durable
It seemed to be Large sturdy even after washing it with Gasoline and Parts cleaner.
Because it is semi-transparent, it is hard to see the Memory, but I think it is inevitable on the Material because the transparent one is Large and a half, which becomes cloudy when washed with Parts cleaner.
When I used it to mix 2-stroke Oils, after measuring it, it was Large sturdy enough to dobble and wash on the Gasoline side.
View detail
One of the Items I'd like to use
I often adjust OEM's Memory with OEM's Memory, although I hear well that I can sloppily.
I have never felt any trouble.
However, regarding this tool, it is what purchased because reasonable situation can be convinced.
In CustomWheel etc, there are things that Offset makes, so it may not be necessary to become nervous.
View detail
Speaking of easy handy
I usually use Maintenace Stand, but since I made it damaged from a slight carelessness, I tried purchasing this item I was curious as before as a connection until I repurchase.
According to the conclusion, it is like the price is suitable.
I think how to compare it with Maintenace Stand, but again it is very heavy to turn the Tire and the workability is not very good.
Also, as the other people say, the position shifts while turning the Tire, so stand up the car etc etc. We need some kind of countermeasure.
However, it does not take up space for storage and does not Lift Motorcycle, so there is almost no Risk to overturn accidentally, and Merit says that prices are cheaper than anything.
However, if it was not discounted and sold at fixed price, I think that you should buy Maintenace Stand from here ...
If you are ChainMaintenance who moves the body forward and backward, I think that it may be good to try purchasing it once.
This time, only rear. I used it for Front, but I would like to use it later.
View detail
Since the Kawasaki was eccentric, it purchased for the check.It is troublesome unexpectedly to set, although it understands whether a Chain is straight immediately.
Since the Kawasaki was eccentric, it purchased for the check.It is troublesome unexpectedly to set, although it understands whether a Chain is straight immediately. View detail
Since the Center stand did not reach the way of VTR of its own Motorcycle, he bought this Roller stand. It uses, and if a Tire is turned, it will have shifted horizontally. Although there was also a place which is hard to use just for a moment, since th
Since the Center stand did not reach the way of VTR of its own Motorcycle, he bought this Roller stand. It uses, and if a Tire is turned, it will have shifted horizontally. Although there was also a place which is hard to use just for a moment, since the Maintenance became easy, the direction which existed was better than there is nothing since it is not high so. View detail
good [ to make the kana lid which should just narrow the crevice between it and the saucer on which the Oil which carries out warmth of the Engine and came to be alike of the Engine smoothly bounds ]
good [ to make the kana
lid which should just narrow the crevice between it and the
saucer on which the Oil which carries out warmth of the Engine and came to be alike of the Engine smoothly bounds ]
View detail
He wanted the small suspended tray used at a Garage, and it purchased about three. as Oil Drip pan -- the capacity 2L -- since it is a few, does a just right work load receive the Engine oil of small displacement volume vehicles, such as an abou
He wanted the small suspended tray used at a Garage, and it purchased about three.
as
Oil Drip pan -- the capacity 2L -- since it is a few, does a just right work load receive the Engine oil of small displacement volume vehicles, such as an about [ 0.5L~1L ] Fork oil, a Gear oil, and Cub, at most?
Since
BMW K1200RS has a Drain of a Transmission per Pivot of a Center stand.
Although the catchphrase which can let between the Center stands of a Scooter pass was expected and he bought it with eye aim -- It was a disappointment for a while in the state where an Oil will fall if the portion which the end extracted twists by an Exactly at the gap of a Center stand and it will twist when [ at which it puts and puts ] = Removing.
In fact, the direction of uses other than an Oil Drip pan is user-friendly.
As for the portion which the end extracted, a crevice is made between the floors which are raised bottoms and were placed, and since it is good for holding by hand exactly, it is used conveniently to carry out every [ of the tool in use / temporary ] by the floor of a Garage, or once receive dirt parts.
The imitation is put on the market also from the
DAYTONA, and on a nominal-cost Base, since it is practically equal, I think whether stock, a Sale discount rate, etc. are seen and the more suitable one should just be chosen.
View detail
It purchased for Front-wheel cleaning. Since it was a sale article, it purchases for 3500 yen. When putting a Front tire on the Roller stand, it became somewhat prudent, but it could put easily and was also able to make cleaning common. It is satis
It purchased for Front-wheel cleaning.
Since it was a sale article, it purchases for 3500 yen.
When putting a Front tire on the
Roller stand, it became somewhat prudent, but it could put easily and was also able to make cleaning common.
It is satisfactory!!
When calling it the fine problem, it was heard also by the rumor, but while turning the Tire, a Tire shifts.
I think that it will derail to the extent that one week is carried out if a Tire is put on the center of a Roller stand.
In my case, it is ♪ which wants to use a Tire for the right corner of a Roller stand after next time, putting [ ♪ ] if a Tire is turned since it has shifted from the right to the left.
View detail